-
질문 & 답변
카테고리
-
세부 분야
데브옵스 · 인프라
-
해결 여부
미해결
vargant up 문제입니다.
21.03.29 14:03 작성 조회수 423
1
강의와 관련있는 질문을 남겨주세요.
• 강의와 관련이 없는 질문은 지식공유자가 답변하지 않을 수 있습니다. (사적 상담, 컨설팅, 과제 풀이 등)
• 질문을 남기기 전, 비슷한 내용을 질문한 수강생이 있는지 먼저 검색을 해주세요. (중복 질문을 자제해주세요.)
• 서비스 운영 관련 질문은 인프런 우측 하단 ‘문의하기’를 이용해주세요. (영상 재생 문제, 사이트 버그, 강의 환불 등)
질문 전달에도 요령이 필요합니다.
• 지식공유자가 질문을 좀 더 쉽게 확인할 수 있게 도와주세요.
• 강의실 페이지(/lecture) 에서 '질문하기'를 이용해주시면 질문과 연관된 수업 영상 제목이 함께 등록됩니다.
• 강의 대시보드에서 질문을 남길 경우, 관련 섹션 및 수업 제목을 기재해주세요.
• 수업 특정 구간에 대한 질문은 꼭 영상 타임코드를 남겨주세요!
구체적인 질문일수록 명확한 답을 받을 수 있어요.
• 질문 제목은 핵심 키워드를 포함해 간결하게 적어주세요.
• 질문 내용은 자세하게 적어주시되, 지식공유자가 답변할 수 있도록 구체적으로 남겨주세요.
• 정확한 질문 내용과 함께 코드를 적어주시거나, 캡쳐 이미지를 첨부하면 더욱 좋습니다.
기본적인 예의를 지켜주세요.
• 정중한 의견 및 문의 제시, 감사 인사 등의 커뮤니케이션은 더 나은 강의를 위한 기틀이 됩니다.
• 질문이 있을 때에는 강의를 만든 지식공유자에 대한 기본적인 예의를 꼭 지켜주세요.
• 반말, 욕설, 과격한 표현 등 지식공유자를 불쾌하게 할 수 있는 내용은 스팸 처리 등 제재를 가할 수 있습니다.
안녕하세요. 강의 잘듣고 있습니다.
vagrant up 시 에러가 나서 문의 드립니다.
현재 환경은 linuxmint 20 (ubuntu 20.04) 입니다.
vagrant up시 아래와 같은 에러가 나옵니다.
w1-k8s-1.20: Loaded plugins: fastestmirror
w1-k8s-1.20: Loading mirror speeds from cached hostfile
w1-k8s-1.20: * base: ftp.iij.ad.jp
w1-k8s-1.20: * extras: ftp.iij.ad.jp
w1-k8s-1.20: * updates: ftp.iij.ad.jp
w1-k8s-1.20: Retrieving key from https://packages.cloud.google.com/yum/doc/yum-key.gpg
w1-k8s-1.20: Importing GPG key 0xA7317B0F:
w1-k8s-1.20: Userid : "Google Cloud Packages Automatic Signing Key <gc-team@google.com>"
w1-k8s-1.20: Fingerprint: d0bc 747f d8ca f711 7500 d6fa 3746 c208 a731 7b0f
w1-k8s-1.20: From : https://packages.cloud.google.com/yum/doc/yum-key.gpg
w1-k8s-1.20: Retrieving key from https://packages.cloud.google.com/yum/doc/rpm-package-key.gpg
w1-k8s-1.20: https://packages.cloud.google.com/yum/repos/kubernetes-el7-x86_64/repodata/repomd.xml: [Errno -1] repomd.xml signature could not be verified for kubernetes
w1-k8s-1.20: Trying other mirror.
w1-k8s-1.20:
w1-k8s-1.20:
w1-k8s-1.20: One of the configured repositories failed (Kubernetes),
w1-k8s-1.20: and yum doesn't have enough cached data to continue. At this point the only
w1-k8s-1.20: safe thing yum can do is fail. There are a few ways to work "fix" this:
w1-k8s-1.20:
w1-k8s-1.20: 1. Contact the upstream for the repository and get them to fix the problem.
w1-k8s-1.20:
w1-k8s-1.20: 2. Reconfigure the baseurl/etc. for the repository, to point to a working
w1-k8s-1.20: upstream. This is most often useful if you are using a newer
w1-k8s-1.20: distribution release than is supported by the repository (and the
w1-k8s-1.20: packages for the previous distribution release still work).
w1-k8s-1.20:
w1-k8s-1.20: 3. Run the command with the repository temporarily disabled
w1-k8s-1.20: yum --disablerepo=kubernetes ...
w1-k8s-1.20:
w1-k8s-1.20: 4. Disable the repository permanently, so yum won't use it by default. Yum
w1-k8s-1.20: will then just ignore the repository until you permanently enable it
w1-k8s-1.20: again or use --enablerepo for temporary usage:
w1-k8s-1.20:
w1-k8s-1.20: yum-config-manager --disable kubernetes
w1-k8s-1.20: or
w1-k8s-1.20: subscription-manager repos --disable=kubernetes
w1-k8s-1.20:
w1-k8s-1.20: 5. Configure the failing repository to be skipped, if it is unavailable.
w1-k8s-1.20: Note that yum will try to contact the repo. when it runs most commands,
w1-k8s-1.20: so will have to try and fail each time (and thus. yum will be be much
w1-k8s-1.20: slower). If it is a very temporary problem though, this is often a nice
w1-k8s-1.20: compromise:
w1-k8s-1.20:
w1-k8s-1.20: yum-config-manager --save --setopt=kubernetes.skip_if_unavailable=true
w1-k8s-1.20:
w1-k8s-1.20: failure: repodata/repomd.xml from kubernetes: [Errno 256] No more mirrors to try.
w1-k8s-1.20: https://packages.cloud.google.com/yum/repos/kubernetes-el7-x86_64/repodata/repomd.xml: [Errno -1] repomd.xml signature could not be verified for kubernetes
w1-k8s-1.20: Failed to execute operation: No such file or directory
w1-k8s-1.20: Failed to execute operation: No such file or directory
The SSH command responded with a non-zero exit status. Vagrant
assumes that this means the command failed. The output for this command
should be in the log above. Please read the output to determine what
went wrong.
답변을 작성해보세요.
1
백동주
질문자2021.03.29
kubectl get nodes 하면 정상적으로 워커 노드가 나옵니다.
sqllite가 설치가 안되면 어떤 문제가 있을지 몰라 문의 드립니다.
windows 나 mac은 안타깝게도 제가 갖고 있지 않습니다.
우선 실습을 진행하고 문제가 발생하면 다시 질문드려도 될까요? ^^;
조훈(Hoon Jo)
지식공유자2021.03.29
네 현재 실습에는 지장이 전혀 없으실 것으로 생각됩니다. :)
그럼요 질문 주세요 덕분에 gpg key 문제 있는 것도 발견했는걸요.
일시적인거 같긴 한데...(얘를 clone해둘수도 없고...)
좀 더 테스트하고 긴급 공지해야 겠네요...
질문 주셔서 감사합니다. ㅠ
0
0
조훈(Hoon Jo)
지식공유자2021.03.29
참고로 현재 맥에서 테스트한 결과 sqlite는 설치되고 있지 않은데, vagrant+현재 환경이 어떤 이유로 그걸 시도하고 있는지 알기가 어렵네요..
조만간 전체 full script 올려드릴께요 비교해 보시면 좋을꺼 같아요.
조훈 드림.
0
0
조훈(Hoon Jo)
지식공유자2021.03.29
안녕하세요
2번 'vagrant up'을 하셨고, 현재 예상하기로는 kubectl get nodes를 하시면,
노드가 정상적으로 조인되어 쿠버네티스 클러스터가 구성되었을꺼 같습니다.
그런데 현재 스크립트 중에
1) 에러라고 보여지는게 궁금하신건지,
2) 문제가 있으신건지
판단이 안되는데요.
정확한 요청을 말씀해 주실수 있을까요?
w2-k8s-1.20: Running transaction
w2-k8s-1.20: Installing : epel-release-7-11.noarch 1/1
w2-k8s-1.20:
w2-k8s-1.20: Verifying : epel-release-7-11.noarch 1/1
w2-k8s-1.20:
w2-k8s-1.20:
w2-k8s-1.20: Installed:
w2-k8s-1.20: epel-release.noarch 0:7-11
w2-k8s-1.20: Complete!
w2-k8s-1.20: Loaded plugins: fastestmirror
w2-k8s-1.20: Loading mirror speeds from cached hostfile
w2-k8s-1.20: * base: ftp.kaist.ac.kr
w2-k8s-1.20: * epel: ftp.iij.ad.jp
w2-k8s-1.20: * extras: ftp.kaist.ac.kr
w2-k8s-1.20: * updates: ftp.kaist.ac.kr
w2-k8s-1.20: http://fedora.cs.nctu.edu.tw/epel/7/x86_64/repodata/962e01e9735b70ff47c1939b3abc9fcd44b57ed8697dcd739a7e9d9a29468064-updateinfo.xml.bz2: [Errno 14] HTTP Error 404 - Not Found
w2-k8s-1.20: Trying other mirror.
w2-k8s-1.20: To address this issue please refer to the below wiki article
<snipped>
w3-k8s-1.20: [kubelet-start] Writing kubelet environment file with flags to file "/var/lib/kubelet/kubeadm-flags.env"
w3-k8s-1.20: [kubelet-start] Starting the kubelet
w3-k8s-1.20: [kubelet-start] Waiting for the kubelet to perform the TLS Bootstrap...
w3-k8s-1.20:
w3-k8s-1.20: This node has joined the cluster:
w3-k8s-1.20: * Certificate signing request was sent to apiserver and a response was received.
w3-k8s-1.20: * The Kubelet was informed of the new secure connection details.
w3-k8s-1.20:
w3-k8s-1.20: Run 'kubectl get nodes' on the control-plane to see this node join the cluster.
위의 에러를 얘기하려면 epel의 repo cache 구조 및 코드에서 repo list에서 찾아가는 매카니즘을 확인하고 어떻게 예외처리하는지 확인해야 할 것 같이 보여서요.
문제가 되는 부분을 정확하게 말씀 부탁드려요.
그리고 사용자 환경 중에 매우 예외적인 민트/우분투 환경에서 어려움이 있으시다면, 주로 개인 사용자가 많이 쓰는 윈도우와 맥을 권장드립니다. (아마 현재 클러스터 구성은 되었을 것으로 보여지긴 하지만요..)
조훈 드림.
0
백동주
질문자2021.03.29
0) 현재 환경(시스템 및 네트워크 관련 정보 모두)
linuxmint 20 ubuntu 20
1) (반복적으로 발생하는) 문제:
1 .gpg 문제 repo_gpgcheck=0로 진행중
2) 문제 재현 방법:
1. linuxmint vagrant up 시
3) 관련 로그 모두:
첨부
❯ vagrant up
Bringing machine 'm-k8s-1.20' up with 'virtualbox' provider...
Bringing machine 'w1-k8s-1.20' up with 'virtualbox' provider...
Bringing machine 'w2-k8s-1.20' up with 'virtualbox' provider...
Bringing machine 'w3-k8s-1.20' up with 'virtualbox' provider...
==> m-k8s-1.20: Importing base box 'sysnet4admin/CentOS-k8s'...
==> m-k8s-1.20: Matching MAC address for NAT networking...
==> m-k8s-1.20: Checking if box 'sysnet4admin/CentOS-k8s' version '0.7.4' is up to date...
==> m-k8s-1.20: Setting the name of the VM: m-k8s-1.20(github_SysNet4Admin)
==> m-k8s-1.20: Clearing any previously set network interfaces...
==> m-k8s-1.20: Preparing network interfaces based on configuration...
m-k8s-1.20: Adapter 1: nat
m-k8s-1.20: Adapter 2: hostonly
==> m-k8s-1.20: Forwarding ports...
m-k8s-1.20: 22 (guest) => 60010 (host) (adapter 1)
==> m-k8s-1.20: Running 'pre-boot' VM customizations...
==> m-k8s-1.20: Booting VM...
==> m-k8s-1.20: Waiting for machine to boot. This may take a few minutes...
m-k8s-1.20: SSH address: 127.0.0.1:60010
m-k8s-1.20: SSH username: vagrant
m-k8s-1.20: SSH auth method: private key
m-k8s-1.20:
m-k8s-1.20: Vagrant insecure key detected. Vagrant will automatically replace
m-k8s-1.20: this with a newly generated keypair for better security.
m-k8s-1.20:
m-k8s-1.20: Inserting generated public key within guest...
m-k8s-1.20: Removing insecure key from the guest if it's present...
m-k8s-1.20: Key inserted! Disconnecting and reconnecting using new SSH key...
==> m-k8s-1.20: Machine booted and ready!
==> m-k8s-1.20: Checking for guest additions in VM...
m-k8s-1.20: The guest additions on this VM do not match the installed version of
m-k8s-1.20: VirtualBox! In most cases this is fine, but in rare cases it can
m-k8s-1.20: prevent things such as shared folders from working properly. If you see
m-k8s-1.20: shared folder errors, please make sure the guest additions within the
m-k8s-1.20: virtual machine match the version of VirtualBox you have installed on
m-k8s-1.20: your host and reload your VM.
m-k8s-1.20:
m-k8s-1.20: Guest Additions Version: 5.2.12
m-k8s-1.20: VirtualBox Version: 6.1
==> m-k8s-1.20: Setting hostname...
==> m-k8s-1.20: Configuring and enabling network interfaces...
==> m-k8s-1.20: Running provisioner: shell...
m-k8s-1.20: Running: /tmp/vagrant-shell20210329-61505-cu98qz.sh
m-k8s-1.20: Loaded plugins: fastestmirror
m-k8s-1.20: Determining fastest mirrors
m-k8s-1.20: * base: mirror.kakao.com
m-k8s-1.20: * extras: mirror.kakao.com
m-k8s-1.20: * updates: mirror.kakao.com
m-k8s-1.20: Retrieving key from https://packages.cloud.google.com/yum/doc/yum-key.gpg
m-k8s-1.20: Importing GPG key 0xA7317B0F:
m-k8s-1.20: Userid : "Google Cloud Packages Automatic Signing Key <gc-team@google.com>"
m-k8s-1.20: Fingerprint: d0bc 747f d8ca f711 7500 d6fa 3746 c208 a731 7b0f
m-k8s-1.20: From : https://packages.cloud.google.com/yum/doc/yum-key.gpg
m-k8s-1.20: Retrieving key from https://packages.cloud.google.com/yum/doc/rpm-package-key.gpg
m-k8s-1.20: https://packages.cloud.google.com/yum/repos/kubernetes-el7-x86_64/repodata/repomd.xml: [Errno -1] repomd.xml signature could not be verified for kubernetes
m-k8s-1.20: Trying other mirror.
m-k8s-1.20:
m-k8s-1.20:
m-k8s-1.20: One of the configured repositories failed (Kubernetes),
m-k8s-1.20: and yum doesn't have enough cached data to continue. At this point the only
m-k8s-1.20: safe thing yum can do is fail. There are a few ways to work "fix" this:
m-k8s-1.20:
m-k8s-1.20: 1. Contact the upstream for the repository and get them to fix the problem.
m-k8s-1.20:
m-k8s-1.20: 2. Reconfigure the baseurl/etc. for the repository, to point to a working
m-k8s-1.20: upstream. This is most often useful if you are using a newer
m-k8s-1.20: distribution release than is supported by the repository (and the
m-k8s-1.20: packages for the previous distribution release still work).
m-k8s-1.20:
m-k8s-1.20: 3. Run the command with the repository temporarily disabled
m-k8s-1.20: yum --disablerepo=kubernetes ...
m-k8s-1.20:
m-k8s-1.20: 4. Disable the repository permanently, so yum won't use it by default. Yum
m-k8s-1.20: will then just ignore the repository until you permanently enable it
m-k8s-1.20: again or use --enablerepo for temporary usage:
m-k8s-1.20:
m-k8s-1.20: yum-config-manager --disable kubernetes
m-k8s-1.20: or
m-k8s-1.20: subscription-manager repos --disable=kubernetes
m-k8s-1.20:
m-k8s-1.20: 5. Configure the failing repository to be skipped, if it is unavailable.
m-k8s-1.20: Note that yum will try to contact the repo. when it runs most commands,
m-k8s-1.20: so will have to try and fail each time (and thus. yum will be be much
m-k8s-1.20: slower). If it is a very temporary problem though, this is often a nice
m-k8s-1.20: compromise:
m-k8s-1.20:
m-k8s-1.20: yum-config-manager --save --setopt=kubernetes.skip_if_unavailable=true
m-k8s-1.20:
m-k8s-1.20: failure: repodata/repomd.xml from kubernetes: [Errno 256] No more mirrors to try.
m-k8s-1.20: https://packages.cloud.google.com/yum/repos/kubernetes-el7-x86_64/repodata/repomd.xml: [Errno -1] repomd.xml signature could not be verified for kubernetes
m-k8s-1.20: Loaded plugins: fastestmirror
m-k8s-1.20: adding repo from: https://download.docker.com/linux/centos/docker-ce.repo
m-k8s-1.20: grabbing file https://download.docker.com/linux/centos/docker-ce.repo to /etc/yum.repos.d/docker-ce.repo
m-k8s-1.20: repo saved to /etc/yum.repos.d/docker-ce.repo
==> m-k8s-1.20: Running provisioner: shell...
m-k8s-1.20: Running: /tmp/vagrant-shell20210329-61505-z788z.sh
m-k8s-1.20: Loaded plugins: fastestmirror
m-k8s-1.20: Loading mirror speeds from cached hostfile
m-k8s-1.20: * base: mirror.kakao.com
m-k8s-1.20: * extras: mirror.kakao.com
m-k8s-1.20: * updates: mirror.kakao.com
m-k8s-1.20: Retrieving key from https://packages.cloud.google.com/yum/doc/yum-key.gpg
m-k8s-1.20: Importing GPG key 0xA7317B0F:
m-k8s-1.20: Userid : "Google Cloud Packages Automatic Signing Key <gc-team@google.com>"
m-k8s-1.20: Fingerprint: d0bc 747f d8ca f711 7500 d6fa 3746 c208 a731 7b0f
m-k8s-1.20: From : https://packages.cloud.google.com/yum/doc/yum-key.gpg
m-k8s-1.20: Retrieving key from https://packages.cloud.google.com/yum/doc/rpm-package-key.gpg
m-k8s-1.20: https://packages.cloud.google.com/yum/repos/kubernetes-el7-x86_64/repodata/repomd.xml: [Errno -1] repomd.xml signature could not be verified for kubernetes
m-k8s-1.20: Trying other mirror.
m-k8s-1.20:
m-k8s-1.20:
m-k8s-1.20: One of the configured repositories failed (Kubernetes),
m-k8s-1.20: and yum doesn't have enough cached data to continue. At this point the only
m-k8s-1.20: safe thing yum can do is fail. There are a few ways to work "fix" this:
m-k8s-1.20:
m-k8s-1.20: 1. Contact the upstream for the repository and get them to fix the problem.
m-k8s-1.20:
m-k8s-1.20: 2. Reconfigure the baseurl/etc. for the repository, to point to a working
m-k8s-1.20: upstream. This is most often useful if you are using a newer
m-k8s-1.20: distribution release than is supported by the repository (and the
m-k8s-1.20: packages for the previous distribution release still work).
m-k8s-1.20:
m-k8s-1.20: 3. Run the command with the repository temporarily disabled
m-k8s-1.20: yum --disablerepo=kubernetes ...
m-k8s-1.20:
m-k8s-1.20: 4. Disable the repository permanently, so yum won't use it by default. Yum
m-k8s-1.20: will then just ignore the repository until you permanently enable it
m-k8s-1.20: again or use --enablerepo for temporary usage:
m-k8s-1.20:
m-k8s-1.20: yum-config-manager --disable kubernetes
m-k8s-1.20: or
m-k8s-1.20: subscription-manager repos --disable=kubernetes
m-k8s-1.20:
m-k8s-1.20: 5. Configure the failing repository to be skipped, if it is unavailable.
m-k8s-1.20: Note that yum will try to contact the repo. when it runs most commands,
m-k8s-1.20: so will have to try and fail each time (and thus. yum will be be much
m-k8s-1.20: slower). If it is a very temporary problem though, this is often a nice
m-k8s-1.20: compromise:
m-k8s-1.20:
m-k8s-1.20: yum-config-manager --save --setopt=kubernetes.skip_if_unavailable=true
m-k8s-1.20:
m-k8s-1.20: failure: repodata/repomd.xml from kubernetes: [Errno 256] No more mirrors to try.
m-k8s-1.20: https://packages.cloud.google.com/yum/repos/kubernetes-el7-x86_64/repodata/repomd.xml: [Errno -1] repomd.xml signature could not be verified for kubernetes
m-k8s-1.20: Loaded plugins: fastestmirror
m-k8s-1.20: Loading mirror speeds from cached hostfile
m-k8s-1.20: * base: mirror.kakao.com
m-k8s-1.20: * extras: mirror.kakao.com
m-k8s-1.20: * updates: mirror.kakao.com
m-k8s-1.20: Retrieving key from https://packages.cloud.google.com/yum/doc/yum-key.gpg
m-k8s-1.20: Importing GPG key 0xA7317B0F:
m-k8s-1.20: Userid : "Google Cloud Packages Automatic Signing Key <gc-team@google.com>"
m-k8s-1.20: Fingerprint: d0bc 747f d8ca f711 7500 d6fa 3746 c208 a731 7b0f
m-k8s-1.20: From : https://packages.cloud.google.com/yum/doc/yum-key.gpg
m-k8s-1.20: Retrieving key from https://packages.cloud.google.com/yum/doc/rpm-package-key.gpg
m-k8s-1.20: https://packages.cloud.google.com/yum/repos/kubernetes-el7-x86_64/repodata/repomd.xml: [Errno -1] repomd.xml signature could not be verified for kubernetes
m-k8s-1.20: Trying other mirror.
m-k8s-1.20:
m-k8s-1.20:
m-k8s-1.20: One of the configured repositories failed (Kubernetes),
m-k8s-1.20: and yum doesn't have enough cached data to continue. At this point the only
m-k8s-1.20: safe thing yum can do is fail. There are a few ways to work "fix" this:
m-k8s-1.20:
m-k8s-1.20: 1. Contact the upstream for the repository and get them to fix the problem.
m-k8s-1.20:
m-k8s-1.20: 2. Reconfigure the baseurl/etc. for the repository, to point to a working
m-k8s-1.20: upstream. This is most often useful if you are using a newer
m-k8s-1.20: distribution release than is supported by the repository (and the
m-k8s-1.20: packages for the previous distribution release still work).
m-k8s-1.20:
m-k8s-1.20: 3. Run the command with the repository temporarily disabled
m-k8s-1.20: yum --disablerepo=kubernetes ...
m-k8s-1.20:
m-k8s-1.20: 4. Disable the repository permanently, so yum won't use it by default. Yum
m-k8s-1.20: will then just ignore the repository until you permanently enable it
m-k8s-1.20: again or use --enablerepo for temporary usage:
m-k8s-1.20:
m-k8s-1.20: yum-config-manager --disable kubernetes
m-k8s-1.20: or
m-k8s-1.20: subscription-manager repos --disable=kubernetes
m-k8s-1.20:
m-k8s-1.20: 5. Configure the failing repository to be skipped, if it is unavailable.
m-k8s-1.20: Note that yum will try to contact the repo. when it runs most commands,
m-k8s-1.20: so will have to try and fail each time (and thus. yum will be be much
m-k8s-1.20: slower). If it is a very temporary problem though, this is often a nice
m-k8s-1.20: compromise:
m-k8s-1.20:
m-k8s-1.20: yum-config-manager --save --setopt=kubernetes.skip_if_unavailable=true
m-k8s-1.20:
m-k8s-1.20: failure: repodata/repomd.xml from kubernetes: [Errno 256] No more mirrors to try.
m-k8s-1.20: https://packages.cloud.google.com/yum/repos/kubernetes-el7-x86_64/repodata/repomd.xml: [Errno -1] repomd.xml signature could not be verified for kubernetes
m-k8s-1.20: Loaded plugins: fastestmirror
m-k8s-1.20: Loading mirror speeds from cached hostfile
m-k8s-1.20: * base: mirror.kakao.com
m-k8s-1.20: * extras: mirror.kakao.com
m-k8s-1.20: * updates: mirror.kakao.com
m-k8s-1.20: Retrieving key from https://packages.cloud.google.com/yum/doc/yum-key.gpg
m-k8s-1.20: Importing GPG key 0xA7317B0F:
m-k8s-1.20: Userid : "Google Cloud Packages Automatic Signing Key <gc-team@google.com>"
m-k8s-1.20: Fingerprint: d0bc 747f d8ca f711 7500 d6fa 3746 c208 a731 7b0f
m-k8s-1.20: From : https://packages.cloud.google.com/yum/doc/yum-key.gpg
m-k8s-1.20: Retrieving key from https://packages.cloud.google.com/yum/doc/rpm-package-key.gpg
m-k8s-1.20: https://packages.cloud.google.com/yum/repos/kubernetes-el7-x86_64/repodata/repomd.xml: [Errno -1] repomd.xml signature could not be verified for kubernetes
m-k8s-1.20: Trying other mirror.
m-k8s-1.20:
m-k8s-1.20:
m-k8s-1.20: One of the configured repositories failed (Kubernetes),
m-k8s-1.20: and yum doesn't have enough cached data to continue. At this point the only
m-k8s-1.20: safe thing yum can do is fail. There are a few ways to work "fix" this:
m-k8s-1.20:
m-k8s-1.20: 1. Contact the upstream for the repository and get them to fix the problem.
m-k8s-1.20:
m-k8s-1.20: 2. Reconfigure the baseurl/etc. for the repository, to point to a working
m-k8s-1.20: upstream. This is most often useful if you are using a newer
m-k8s-1.20: distribution release than is supported by the repository (and the
m-k8s-1.20: packages for the previous distribution release still work).
m-k8s-1.20:
m-k8s-1.20: 3. Run the command with the repository temporarily disabled
m-k8s-1.20: yum --disablerepo=kubernetes ...
m-k8s-1.20:
m-k8s-1.20: 4. Disable the repository permanently, so yum won't use it by default. Yum
m-k8s-1.20: will then just ignore the repository until you permanently enable it
m-k8s-1.20: again or use --enablerepo for temporary usage:
m-k8s-1.20:
m-k8s-1.20: yum-config-manager --disable kubernetes
m-k8s-1.20: or
m-k8s-1.20: subscription-manager repos --disable=kubernetes
m-k8s-1.20:
m-k8s-1.20: 5. Configure the failing repository to be skipped, if it is unavailable.
m-k8s-1.20: Note that yum will try to contact the repo. when it runs most commands,
m-k8s-1.20: so will have to try and fail each time (and thus. yum will be be much
m-k8s-1.20: slower). If it is a very temporary problem though, this is often a nice
m-k8s-1.20: compromise:
m-k8s-1.20:
m-k8s-1.20: yum-config-manager --save --setopt=kubernetes.skip_if_unavailable=true
m-k8s-1.20:
m-k8s-1.20: failure: repodata/repomd.xml from kubernetes: [Errno 256] No more mirrors to try.
m-k8s-1.20: https://packages.cloud.google.com/yum/repos/kubernetes-el7-x86_64/repodata/repomd.xml: [Errno -1] repomd.xml signature could not be verified for kubernetes
m-k8s-1.20: Loaded plugins: fastestmirror
m-k8s-1.20: Loading mirror speeds from cached hostfile
m-k8s-1.20: * base: mirror.kakao.com
m-k8s-1.20: * extras: mirror.kakao.com
m-k8s-1.20: * updates: mirror.kakao.com
m-k8s-1.20: Retrieving key from https://packages.cloud.google.com/yum/doc/yum-key.gpg
m-k8s-1.20: Importing GPG key 0xA7317B0F:
m-k8s-1.20: Userid : "Google Cloud Packages Automatic Signing Key <gc-team@google.com>"
m-k8s-1.20: Fingerprint: d0bc 747f d8ca f711 7500 d6fa 3746 c208 a731 7b0f
m-k8s-1.20: From : https://packages.cloud.google.com/yum/doc/yum-key.gpg
m-k8s-1.20: Retrieving key from https://packages.cloud.google.com/yum/doc/rpm-package-key.gpg
m-k8s-1.20: https://packages.cloud.google.com/yum/repos/kubernetes-el7-x86_64/repodata/repomd.xml: [Errno -1] repomd.xml signature could not be verified for kubernetes
m-k8s-1.20: Trying other mirror.
m-k8s-1.20:
m-k8s-1.20:
m-k8s-1.20: One of the configured repositories failed (Kubernetes),
m-k8s-1.20: and yum doesn't have enough cached data to continue. At this point the only
m-k8s-1.20: safe thing yum can do is fail. There are a few ways to work "fix" this:
m-k8s-1.20:
m-k8s-1.20: 1. Contact the upstream for the repository and get them to fix the problem.
m-k8s-1.20:
m-k8s-1.20: 2. Reconfigure the baseurl/etc. for the repository, to point to a working
m-k8s-1.20: upstream. This is most often useful if you are using a newer
m-k8s-1.20: distribution release than is supported by the repository (and the
m-k8s-1.20: packages for the previous distribution release still work).
m-k8s-1.20:
m-k8s-1.20: 3. Run the command with the repository temporarily disabled
m-k8s-1.20: yum --disablerepo=kubernetes ...
m-k8s-1.20:
m-k8s-1.20: 4. Disable the repository permanently, so yum won't use it by default. Yum
m-k8s-1.20: will then just ignore the repository until you permanently enable it
m-k8s-1.20: again or use --enablerepo for temporary usage:
m-k8s-1.20:
m-k8s-1.20: yum-config-manager --disable kubernetes
m-k8s-1.20: or
m-k8s-1.20: subscription-manager repos --disable=kubernetes
m-k8s-1.20:
m-k8s-1.20: 5. Configure the failing repository to be skipped, if it is unavailable.
m-k8s-1.20: Note that yum will try to contact the repo. when it runs most commands,
m-k8s-1.20: so will have to try and fail each time (and thus. yum will be be much
m-k8s-1.20: slower). If it is a very temporary problem though, this is often a nice
m-k8s-1.20: compromise:
m-k8s-1.20:
m-k8s-1.20: yum-config-manager --save --setopt=kubernetes.skip_if_unavailable=true
m-k8s-1.20:
m-k8s-1.20: failure: repodata/repomd.xml from kubernetes: [Errno 256] No more mirrors to try.
m-k8s-1.20: https://packages.cloud.google.com/yum/repos/kubernetes-el7-x86_64/repodata/repomd.xml: [Errno -1] repomd.xml signature could not be verified for kubernetes
m-k8s-1.20: Loaded plugins: fastestmirror
m-k8s-1.20: Loading mirror speeds from cached hostfile
m-k8s-1.20: * base: mirror.kakao.com
m-k8s-1.20: * extras: mirror.kakao.com
m-k8s-1.20: * updates: mirror.kakao.com
m-k8s-1.20: Retrieving key from https://packages.cloud.google.com/yum/doc/yum-key.gpg
m-k8s-1.20: Importing GPG key 0xA7317B0F:
m-k8s-1.20: Userid : "Google Cloud Packages Automatic Signing Key <gc-team@google.com>"
m-k8s-1.20: Fingerprint: d0bc 747f d8ca f711 7500 d6fa 3746 c208 a731 7b0f
m-k8s-1.20: From : https://packages.cloud.google.com/yum/doc/yum-key.gpg
m-k8s-1.20: Retrieving key from https://packages.cloud.google.com/yum/doc/rpm-package-key.gpg
m-k8s-1.20: https://packages.cloud.google.com/yum/repos/kubernetes-el7-x86_64/repodata/repomd.xml: [Errno -1] repomd.xml signature could not be verified for kubernetes
m-k8s-1.20: Trying other mirror.
m-k8s-1.20:
m-k8s-1.20:
m-k8s-1.20: One of the configured repositories failed (Kubernetes),
m-k8s-1.20: and yum doesn't have enough cached data to continue. At this point the only
m-k8s-1.20: safe thing yum can do is fail. There are a few ways to work "fix" this:
m-k8s-1.20:
m-k8s-1.20: 1. Contact the upstream for the repository and get them to fix the problem.
m-k8s-1.20:
m-k8s-1.20: 2. Reconfigure the baseurl/etc. for the repository, to point to a working
m-k8s-1.20: upstream. This is most often useful if you are using a newer
m-k8s-1.20: distribution release than is supported by the repository (and the
m-k8s-1.20: packages for the previous distribution release still work).
m-k8s-1.20:
m-k8s-1.20: 3. Run the command with the repository temporarily disabled
m-k8s-1.20: yum --disablerepo=kubernetes ...
m-k8s-1.20:
m-k8s-1.20: 4. Disable the repository permanently, so yum won't use it by default. Yum
m-k8s-1.20: will then just ignore the repository until you permanently enable it
m-k8s-1.20: again or use --enablerepo for temporary usage:
m-k8s-1.20:
m-k8s-1.20: yum-config-manager --disable kubernetes
m-k8s-1.20: or
m-k8s-1.20: subscription-manager repos --disable=kubernetes
m-k8s-1.20:
m-k8s-1.20: 5. Configure the failing repository to be skipped, if it is unavailable.
m-k8s-1.20: Note that yum will try to contact the repo. when it runs most commands,
m-k8s-1.20: so will have to try and fail each time (and thus. yum will be be much
m-k8s-1.20: slower). If it is a very temporary problem though, this is often a nice
m-k8s-1.20: compromise:
m-k8s-1.20:
m-k8s-1.20: yum-config-manager --save --setopt=kubernetes.skip_if_unavailable=true
m-k8s-1.20:
m-k8s-1.20: failure: repodata/repomd.xml from kubernetes: [Errno 256] No more mirrors to try.
m-k8s-1.20: https://packages.cloud.google.com/yum/repos/kubernetes-el7-x86_64/repodata/repomd.xml: [Errno -1] repomd.xml signature could not be verified for kubernetes
m-k8s-1.20: Failed to execute operation: No such file or directory
m-k8s-1.20: Failed to execute operation: No such file or directory
The SSH command responded with a non-zero exit status. Vagrant
assumes that this means the command failed. The output for this command
should be in the log above. Please read the output to determine what
went wrong.
❯ vagrant up
Bringing machine 'm-k8s-1.20' up with 'virtualbox' provider...
Bringing machine 'w1-k8s-1.20' up with 'virtualbox' provider...
Bringing machine 'w2-k8s-1.20' up with 'virtualbox' provider...
Bringing machine 'w3-k8s-1.20' up with 'virtualbox' provider...
==> m-k8s-1.20: Importing base box 'sysnet4admin/CentOS-k8s'...
==> m-k8s-1.20: Matching MAC address for NAT networking...
==> m-k8s-1.20: Checking if box 'sysnet4admin/CentOS-k8s' version '0.7.4' is up to date...
==> m-k8s-1.20: Setting the name of the VM: m-k8s-1.20(github_SysNet4Admin)
==> m-k8s-1.20: Clearing any previously set network interfaces...
==> m-k8s-1.20: Preparing network interfaces based on configuration...
m-k8s-1.20: Adapter 1: nat
m-k8s-1.20: Adapter 2: hostonly
==> m-k8s-1.20: Forwarding ports...
m-k8s-1.20: 22 (guest) => 60010 (host) (adapter 1)
==> m-k8s-1.20: Running 'pre-boot' VM customizations...
==> m-k8s-1.20: Booting VM...
==> m-k8s-1.20: Waiting for machine to boot. This may take a few minutes...
m-k8s-1.20: SSH address: 127.0.0.1:60010
m-k8s-1.20: SSH username: vagrant
m-k8s-1.20: SSH auth method: private key
m-k8s-1.20:
m-k8s-1.20: Vagrant insecure key detected. Vagrant will automatically replace
m-k8s-1.20: this with a newly generated keypair for better security.
m-k8s-1.20:
m-k8s-1.20: Inserting generated public key within guest...
m-k8s-1.20: Removing insecure key from the guest if it's present...
m-k8s-1.20: Key inserted! Disconnecting and reconnecting using new SSH key...
==> m-k8s-1.20: Machine booted and ready!
==> m-k8s-1.20: Checking for guest additions in VM...
m-k8s-1.20: The guest additions on this VM do not match the installed version of
m-k8s-1.20: VirtualBox! In most cases this is fine, but in rare cases it can
m-k8s-1.20: prevent things such as shared folders from working properly. If you see
m-k8s-1.20: shared folder errors, please make sure the guest additions within the
m-k8s-1.20: virtual machine match the version of VirtualBox you have installed on
m-k8s-1.20: your host and reload your VM.
m-k8s-1.20:
m-k8s-1.20: Guest Additions Version: 5.2.12
m-k8s-1.20: VirtualBox Version: 6.1
==> m-k8s-1.20: Setting hostname...
==> m-k8s-1.20: Configuring and enabling network interfaces...
==> m-k8s-1.20: Running provisioner: shell...
m-k8s-1.20: Running: /tmp/vagrant-shell20210329-63160-1ih4ow8.sh
m-k8s-1.20: Loaded plugins: fastestmirror
m-k8s-1.20: Determining fastest mirrors
m-k8s-1.20: * base: mirror.kakao.com
m-k8s-1.20: * extras: mirror.kakao.com
m-k8s-1.20: * updates: mirror.kakao.com
m-k8s-1.20: Package yum-utils-1.1.31-54.el7_8.noarch already installed and latest version
m-k8s-1.20: Nothing to do
m-k8s-1.20: Loaded plugins: fastestmirror
m-k8s-1.20: adding repo from: https://download.docker.com/linux/centos/docker-ce.repo
m-k8s-1.20: grabbing file https://download.docker.com/linux/centos/docker-ce.repo to /etc/yum.repos.d/docker-ce.repo
m-k8s-1.20: repo saved to /etc/yum.repos.d/docker-ce.repo
==> m-k8s-1.20: Running provisioner: shell...
m-k8s-1.20: Running: /tmp/vagrant-shell20210329-63160-wdwmkg.sh
m-k8s-1.20: Loaded plugins: fastestmirror
m-k8s-1.20: Loading mirror speeds from cached hostfile
m-k8s-1.20: * base: mirror.kakao.com
m-k8s-1.20: * extras: mirror.kakao.com
m-k8s-1.20: * updates: mirror.kakao.com
m-k8s-1.20: Resolving Dependencies
m-k8s-1.20: --> Running transaction check
m-k8s-1.20: ---> Package epel-release.noarch 0:7-11 will be installed
m-k8s-1.20: --> Finished Dependency Resolution
m-k8s-1.20:
m-k8s-1.20: Dependencies Resolved
m-k8s-1.20:
m-k8s-1.20: ================================================================================
m-k8s-1.20: Package Arch Version Repository Size
m-k8s-1.20: ================================================================================
m-k8s-1.20: Installing:
m-k8s-1.20: epel-release noarch 7-11 extras 15 k
m-k8s-1.20:
m-k8s-1.20: Transaction Summary
m-k8s-1.20: ================================================================================
m-k8s-1.20: Install 1 Package
m-k8s-1.20: Total download size: 15 k
m-k8s-1.20: Installed size: 24 k
m-k8s-1.20: Downloading packages:
m-k8s-1.20: Running transaction check
m-k8s-1.20: Running transaction test
m-k8s-1.20: Transaction test succeeded
m-k8s-1.20: Running transaction
m-k8s-1.20: Installing : epel-release-7-11.noarch 1/1
m-k8s-1.20:
m-k8s-1.20: Verifying : epel-release-7-11.noarch 1/1
m-k8s-1.20:
m-k8s-1.20:
m-k8s-1.20: Installed:
m-k8s-1.20: epel-release.noarch 0:7-11
m-k8s-1.20: Complete!
m-k8s-1.20: Loaded plugins: fastestmirror
m-k8s-1.20: Loading mirror speeds from cached hostfile
m-k8s-1.20: * base: mirror.kakao.com
m-k8s-1.20: * epel: ftp.jaist.ac.jp
m-k8s-1.20: * extras: mirror.kakao.com
m-k8s-1.20: * updates: mirror.kakao.com
m-k8s-1.20: http://fedora.cs.nctu.edu.tw/epel/7/x86_64/repodata/83a1589d01f3ca787903c382275594b95d14667e306e9460118036094e21f041-primary.sqlite.bz2: [Errno 14] HTTP Error 404 - Not Found
m-k8s-1.20: Trying other mirror.
m-k8s-1.20: To address this issue please refer to the below wiki article
m-k8s-1.20:
m-k8s-1.20: https://wiki.centos.org/yum-errors
m-k8s-1.20:
m-k8s-1.20: If above article doesn't help to resolve this issue please use https://bugs.centos.org/.
m-k8s-1.20: Resolving Dependencies
m-k8s-1.20: --> Running transaction check
m-k8s-1.20: ---> Package vim-enhanced.x86_64 2:7.4.629-8.el7_9 will be installed
m-k8s-1.20: --> Processing Dependency: vim-common = 2:7.4.629-8.el7_9 for package: 2:vim-enhanced-7.4.629-8.el7_9.x86_64
m-k8s-1.20: --> Processing Dependency: perl(:MODULE_COMPAT_5.16.3) for package: 2:vim-enhanced-7.4.629-8.el7_9.x86_64
m-k8s-1.20: --> Processing Dependency: libperl.so()(64bit) for package: 2:vim-enhanced-7.4.629-8.el7_9.x86_64
m-k8s-1.20: --> Processing Dependency: libgpm.so.2()(64bit) for package: 2:vim-enhanced-7.4.629-8.el7_9.x86_64
m-k8s-1.20: --> Running transaction check
m-k8s-1.20: ---> Package gpm-libs.x86_64 0:1.20.7-6.el7 will be installed
m-k8s-1.20: ---> Package perl.x86_64 4:5.16.3-299.el7_9 will be installed
m-k8s-1.20: --> Processing Dependency: perl(Socket) >= 1.3 for package: 4:perl-5.16.3-299.el7_9.x86_64
m-k8s-1.20: --> Processing Dependency: perl(Scalar::Util) >= 1.10 for package: 4:perl-5.16.3-299.el7_9.x86_64
m-k8s-1.20: --> Processing Dependency: perl-macros for package: 4:perl-5.16.3-299.el7_9.x86_64
m-k8s-1.20: --> Processing Dependency: perl(threads::shared) for package: 4:perl-5.16.3-299.el7_9.x86_64
m-k8s-1.20: --> Processing Dependency: perl(threads) for package: 4:perl-5.16.3-299.el7_9.x86_64
m-k8s-1.20: --> Processing Dependency: perl(constant) for package: 4:perl-5.16.3-299.el7_9.x86_64
m-k8s-1.20: --> Processing Dependency: perl(Time::Local) for package: 4:perl-5.16.3-299.el7_9.x86_64
m-k8s-1.20: --> Processing Dependency: perl(Time::HiRes) for package: 4:perl-5.16.3-299.el7_9.x86_64
m-k8s-1.20: --> Processing Dependency: perl(Storable) for package: 4:perl-5.16.3-299.el7_9.x86_64
m-k8s-1.20: --> Processing Dependency: perl(Socket) for package: 4:perl-5.16.3-299.el7_9.x86_64
m-k8s-1.20: --> Processing Dependency: perl(Scalar::Util) for package: 4:perl-5.16.3-299.el7_9.x86_64
m-k8s-1.20: --> Processing Dependency: perl(Pod::Simple::XHTML) for package: 4:perl-5.16.3-299.el7_9.x86_64
m-k8s-1.20: --> Processing Dependency: perl(Pod::Simple::Search) for package: 4:perl-5.16.3-299.el7_9.x86_64
m-k8s-1.20: --> Processing Dependency: perl(Getopt::Long) for package: 4:perl-5.16.3-299.el7_9.x86_64
m-k8s-1.20: --> Processing Dependency: perl(Filter::Util::Call) for package: 4:perl-5.16.3-299.el7_9.x86_64
m-k8s-1.20: --> Processing Dependency: perl(File::Temp) for package: 4:perl-5.16.3-299.el7_9.x86_64
m-k8s-1.20: --> Processing Dependency: perl(File::Spec::Unix) for package: 4:perl-5.16.3-299.el7_9.x86_64
m-k8s-1.20: --> Processing Dependency: perl(File::Spec::Functions) for package: 4:perl-5.16.3-299.el7_9.x86_64
m-k8s-1.20: --> Processing Dependency: perl(File::Spec) for package: 4:perl-5.16.3-299.el7_9.x86_64
m-k8s-1.20: --> Processing Dependency: perl(File::Path) for package: 4:perl-5.16.3-299.el7_9.x86_64
m-k8s-1.20: --> Processing Dependency: perl(Exporter) for package: 4:perl-5.16.3-299.el7_9.x86_64
m-k8s-1.20: --> Processing Dependency: perl(Cwd) for package: 4:perl-5.16.3-299.el7_9.x86_64
m-k8s-1.20: --> Processing Dependency: perl(Carp) for package: 4:perl-5.16.3-299.el7_9.x86_64
m-k8s-1.20: ---> Package perl-libs.x86_64 4:5.16.3-299.el7_9 will be installed
m-k8s-1.20: ---> Package vim-common.x86_64 2:7.4.629-8.el7_9 will be installed
m-k8s-1.20: --> Processing Dependency: vim-filesystem for package: 2:vim-common-7.4.629-8.el7_9.x86_64
m-k8s-1.20: --> Running transaction check
m-k8s-1.20: ---> Package perl-Carp.noarch 0:1.26-244.el7 will be installed
m-k8s-1.20: ---> Package perl-Exporter.noarch 0:5.68-3.el7 will be installed
m-k8s-1.20: ---> Package perl-File-Path.noarch 0:2.09-2.el7 will be installed
m-k8s-1.20: ---> Package perl-File-Temp.noarch 0:0.23.01-3.el7 will be installed
m-k8s-1.20: ---> Package perl-Filter.x86_64 0:1.49-3.el7 will be installed
m-k8s-1.20: ---> Package perl-Getopt-Long.noarch 0:2.40-3.el7 will be installed
m-k8s-1.20: --> Processing Dependency: perl(Pod::Usage) >= 1.14 for package: perl-Getopt-Long-2.40-3.el7.noarch
m-k8s-1.20: --> Processing Dependency: perl(Text::ParseWords) for package: perl-Getopt-Long-2.40-3.el7.noarch
m-k8s-1.20: ---> Package perl-PathTools.x86_64 0:3.40-5.el7 will be installed
m-k8s-1.20: ---> Package perl-Pod-Simple.noarch 1:3.28-4.el7 will be installed
m-k8s-1.20: --> Processing Dependency: perl(Pod::Escapes) >= 1.04 for package: 1:perl-Pod-Simple-3.28-4.el7.noarch
m-k8s-1.20: --> Processing Dependency: perl(Encode) for package: 1:perl-Pod-Simple-3.28-4.el7.noarch
m-k8s-1.20: ---> Package perl-Scalar-List-Utils.x86_64 0:1.27-248.el7 will be installed
m-k8s-1.20: ---> Package perl-Socket.x86_64 0:2.010-5.el7 will be installed
m-k8s-1.20: ---> Package perl-Storable.x86_64 0:2.45-3.el7 will be installed
m-k8s-1.20: ---> Package perl-Time-HiRes.x86_64 4:1.9725-3.el7 will be installed
m-k8s-1.20: ---> Package perl-Time-Local.noarch 0:1.2300-2.el7 will be installed
m-k8s-1.20: ---> Package perl-constant.noarch 0:1.27-2.el7 will be installed
m-k8s-1.20: ---> Package perl-macros.x86_64 4:5.16.3-299.el7_9 will be installed
m-k8s-1.20: ---> Package perl-threads.x86_64 0:1.87-4.el7 will be installed
m-k8s-1.20: ---> Package perl-threads-shared.x86_64 0:1.43-6.el7 will be installed
m-k8s-1.20: ---> Package vim-filesystem.x86_64 2:7.4.629-8.el7_9 will be installed
m-k8s-1.20: --> Running transaction check
m-k8s-1.20: ---> Package perl-Encode.x86_64 0:2.51-7.el7 will be installed
m-k8s-1.20: ---> Package perl-Pod-Escapes.noarch 1:1.04-299.el7_9 will be installed
m-k8s-1.20: ---> Package perl-Pod-Usage.noarch 0:1.63-3.el7 will be installed
m-k8s-1.20: --> Processing Dependency: perl(Pod::Text) >= 3.15 for package: perl-Pod-Usage-1.63-3.el7.noarch
m-k8s-1.20: --> Processing Dependency: perl-Pod-Perldoc for package: perl-Pod-Usage-1.63-3.el7.noarch
m-k8s-1.20: ---> Package perl-Text-ParseWords.noarch 0:3.29-4.el7 will be installed
m-k8s-1.20: --> Running transaction check
m-k8s-1.20: ---> Package perl-Pod-Perldoc.noarch 0:3.20-4.el7 will be installed
m-k8s-1.20: --> Processing Dependency: perl(parent) for package: perl-Pod-Perldoc-3.20-4.el7.noarch
m-k8s-1.20: --> Processing Dependency: perl(HTTP::Tiny) for package: perl-Pod-Perldoc-3.20-4.el7.noarch
m-k8s-1.20: ---> Package perl-podlators.noarch 0:2.5.1-3.el7 will be installed
m-k8s-1.20: --> Running transaction check
m-k8s-1.20: ---> Package perl-HTTP-Tiny.noarch 0:0.033-3.el7 will be installed
m-k8s-1.20: ---> Package perl-parent.noarch 1:0.225-244.el7 will be installed
m-k8s-1.20: --> Finished Dependency Resolution
m-k8s-1.20:
m-k8s-1.20: Dependencies Resolved
m-k8s-1.20:
m-k8s-1.20: ================================================================================
m-k8s-1.20: Package Arch Version Repository Size
m-k8s-1.20: ================================================================================
m-k8s-1.20: Installing:
m-k8s-1.20: vim-enhanced x86_64 2:7.4.629-8.el7_9 updates 1.1 M
m-k8s-1.20: Installing for dependencies:
m-k8s-1.20: gpm-libs x86_64 1.20.7-6.el7 base 32 k
m-k8s-1.20: perl x86_64 4:5.16.3-299.el7_9 updates 8.0 M
m-k8s-1.20: perl-Carp noarch 1.26-244.el7 base 19 k
m-k8s-1.20: perl-Encode x86_64 2.51-7.el7 base 1.5 M
m-k8s-1.20: perl-Exporter noarch 5.68-3.el7 base 28 k
m-k8s-1.20: perl-File-Path noarch 2.09-2.el7 base 26 k
m-k8s-1.20: perl-File-Temp noarch 0.23.01-3.el7 base 56 k
m-k8s-1.20: perl-Filter x86_64 1.49-3.el7 base 76 k
m-k8s-1.20: perl-Getopt-Long noarch 2.40-3.el7 base 56 k
m-k8s-1.20: perl-HTTP-Tiny noarch 0.033-3.el7 base 38 k
m-k8s-1.20: perl-PathTools x86_64 3.40-5.el7 base 82 k
m-k8s-1.20: perl-Pod-Escapes noarch 1:1.04-299.el7_9 updates 52 k
m-k8s-1.20: perl-Pod-Perldoc noarch 3.20-4.el7 base 87 k
m-k8s-1.20: perl-Pod-Simple noarch 1:3.28-4.el7 base 216 k
m-k8s-1.20: perl-Pod-Usage noarch 1.63-3.el7 base 27 k
m-k8s-1.20: perl-Scalar-List-Utils x86_64 1.27-248.el7 base 36 k
m-k8s-1.20: perl-Socket x86_64 2.010-5.el7 base 49 k
m-k8s-1.20: perl-Storable x86_64 2.45-3.el7 base 77 k
m-k8s-1.20: perl-Text-ParseWords noarch 3.29-4.el7 base 14 k
m-k8s-1.20: perl-Time-HiRes x86_64 4:1.9725-3.el7 base 45 k
m-k8s-1.20: perl-Time-Local noarch 1.2300-2.el7 base 24 k
m-k8s-1.20: perl-constant noarch 1.27-2.el7 base 19 k
m-k8s-1.20: perl-libs x86_64 4:5.16.3-299.el7_9 updates 690 k
m-k8s-1.20: perl-macros x86_64 4:5.16.3-299.el7_9 updates 44 k
m-k8s-1.20: perl-parent noarch 1:0.225-244.el7 base 12 k
m-k8s-1.20: perl-podlators noarch 2.5.1-3.el7 base 112 k
m-k8s-1.20: perl-threads x86_64 1.87-4.el7 base 49 k
m-k8s-1.20: perl-threads-shared x86_64 1.43-6.el7 base 39 k
m-k8s-1.20: vim-common x86_64 2:7.4.629-8.el7_9 updates 5.9 M
m-k8s-1.20: vim-filesystem x86_64 2:7.4.629-8.el7_9 updates 11 k
m-k8s-1.20:
m-k8s-1.20: Transaction Summary
m-k8s-1.20: ================================================================================
m-k8s-1.20: Install 1 Package (+30 Dependent packages)
m-k8s-1.20: Total download size: 18 M
m-k8s-1.20: Installed size: 60 M
m-k8s-1.20: Downloading packages:
m-k8s-1.20: --------------------------------------------------------------------------------
m-k8s-1.20: Total 9.8 MB/s | 18 MB 00:01
m-k8s-1.20: Running transaction check
m-k8s-1.20: Running transaction test
m-k8s-1.20: Transaction test succeeded
m-k8s-1.20: Running transaction
m-k8s-1.20: Installing : 1:perl-parent-0.225-244.el7.noarch 1/31
m-k8s-1.20:
m-k8s-1.20: Installing : perl-HTTP-Tiny-0.033-3.el7.noarch 2/31
m-k8s-1.20:
m-k8s-1.20: Installing : perl-podlators-2.5.1-3.el7.noarch 3/31
m-k8s-1.20:
m-k8s-1.20: Installing : perl-Pod-Perldoc-3.20-4.el7.noarch 4/31
m-k8s-1.20:
m-k8s-1.20: Installing : 1:perl-Pod-Escapes-1.04-299.el7_9.noarch 5/31
m-k8s-1.20:
m-k8s-1.20: Installing : perl-Encode-2.51-7.el7.x86_64 6/31
m-k8s-1.20:
m-k8s-1.20: Installing : perl-Text-ParseWords-3.29-4.el7.noarch 7/31
m-k8s-1.20:
m-k8s-1.20: Installing : perl-Pod-Usage-1.63-3.el7.noarch 8/31
m-k8s-1.20:
m-k8s-1.20: Installing : 4:perl-macros-5.16.3-299.el7_9.x86_64 9/31
m-k8s-1.20:
m-k8s-1.20: Installing : perl-Storable-2.45-3.el7.x86_64 10/31
m-k8s-1.20:
m-k8s-1.20: Installing : perl-Exporter-5.68-3.el7.noarch 11/31
m-k8s-1.20:
m-k8s-1.20: Installing : perl-constant-1.27-2.el7.noarch 12/31
m-k8s-1.20:
m-k8s-1.20: Installing : perl-Socket-2.010-5.el7.x86_64 13/31
m-k8s-1.20:
m-k8s-1.20: Installing : perl-Time-Local-1.2300-2.el7.noarch 14/31
m-k8s-1.20:
m-k8s-1.20: Installing : perl-Carp-1.26-244.el7.noarch 15/31
m-k8s-1.20:
m-k8s-1.20: Installing : perl-PathTools-3.40-5.el7.x86_64 16/31
m-k8s-1.20:
m-k8s-1.20: Installing : perl-Scalar-List-Utils-1.27-248.el7.x86_64 17/31
m-k8s-1.20:
m-k8s-1.20: Installing : 1:perl-Pod-Simple-3.28-4.el7.noarch 18/31
m-k8s-1.20:
m-k8s-1.20: Installing : perl-File-Temp-0.23.01-3.el7.noarch 19/31
m-k8s-1.20:
m-k8s-1.20: Installing : perl-File-Path-2.09-2.el7.noarch 20/31
m-k8s-1.20:
m-k8s-1.20: Installing : perl-threads-shared-1.43-6.el7.x86_64 21/31
m-k8s-1.20:
m-k8s-1.20: Installing : perl-threads-1.87-4.el7.x86_64 22/31
m-k8s-1.20:
m-k8s-1.20: Installing : 4:perl-Time-HiRes-1.9725-3.el7.x86_64 23/31
m-k8s-1.20:
m-k8s-1.20: Installing : perl-Filter-1.49-3.el7.x86_64 24/31
m-k8s-1.20:
m-k8s-1.20: Installing : 4:perl-libs-5.16.3-299.el7_9.x86_64 25/31
m-k8s-1.20:
m-k8s-1.20: Installing : perl-Getopt-Long-2.40-3.el7.noarch 26/31
m-k8s-1.20:
m-k8s-1.20: Installing : 4:perl-5.16.3-299.el7_9.x86_64 27/31
m-k8s-1.20:
m-k8s-1.20: Installing : gpm-libs-1.20.7-6.el7.x86_64 28/31
m-k8s-1.20:
m-k8s-1.20: Installing : 2:vim-filesystem-7.4.629-8.el7_9.x86_64 29/31
m-k8s-1.20:
m-k8s-1.20: Installing : 2:vim-common-7.4.629-8.el7_9.x86_64 30/31
m-k8s-1.20:
m-k8s-1.20: Installing : 2:vim-enhanced-7.4.629-8.el7_9.x86_64 31/31
m-k8s-1.20:
m-k8s-1.20: Verifying : perl-HTTP-Tiny-0.033-3.el7.noarch 1/31
m-k8s-1.20:
m-k8s-1.20: Verifying : perl-threads-shared-1.43-6.el7.x86_64 2/31
m-k8s-1.20:
m-k8s-1.20: Verifying : perl-Storable-2.45-3.el7.x86_64 3/31
m-k8s-1.20:
m-k8s-1.20: Verifying : perl-Exporter-5.68-3.el7.noarch 4/31
m-k8s-1.20:
m-k8s-1.20: Verifying : perl-constant-1.27-2.el7.noarch 5/31
m-k8s-1.20:
m-k8s-1.20: Verifying : perl-PathTools-3.40-5.el7.x86_64 6/31
m-k8s-1.20:
m-k8s-1.20: Verifying : 4:perl-macros-5.16.3-299.el7_9.x86_64 7/31
m-k8s-1.20:
m-k8s-1.20: Verifying : 2:vim-enhanced-7.4.629-8.el7_9.x86_64 8/31
m-k8s-1.20:
m-k8s-1.20: Verifying : 1:perl-parent-0.225-244.el7.noarch 9/31
m-k8s-1.20:
m-k8s-1.20: Verifying : perl-Socket-2.010-5.el7.x86_64 10/31
m-k8s-1.20:
m-k8s-1.20: Verifying : 2:vim-filesystem-7.4.629-8.el7_9.x86_64 11/31
m-k8s-1.20:
m-k8s-1.20: Verifying : perl-File-Temp-0.23.01-3.el7.noarch 12/31
m-k8s-1.20:
m-k8s-1.20: Verifying : 1:perl-Pod-Simple-3.28-4.el7.noarch 13/31
m-k8s-1.20:
m-k8s-1.20: Verifying : perl-Time-Local-1.2300-2.el7.noarch 14/31
m-k8s-1.20:
m-k8s-1.20: Verifying : 1:perl-Pod-Escapes-1.04-299.el7_9.noarch 15/31
m-k8s-1.20:
m-k8s-1.20: Verifying : perl-Carp-1.26-244.el7.noarch 16/31
m-k8s-1.20:
m-k8s-1.20: Verifying : 2:vim-common-7.4.629-8.el7_9.x86_64 17/31
m-k8s-1.20:
m-k8s-1.20: Verifying : perl-Scalar-List-Utils-1.27-248.el7.x86_64 18/31
m-k8s-1.20:
m-k8s-1.20: Verifying : perl-Pod-Usage-1.63-3.el7.noarch 19/31
m-k8s-1.20:
m-k8s-1.20: Verifying : perl-Encode-2.51-7.el7.x86_64 20/31
m-k8s-1.20:
m-k8s-1.20: Verifying : perl-Pod-Perldoc-3.20-4.el7.noarch 21/31
m-k8s-1.20:
m-k8s-1.20: Verifying : perl-podlators-2.5.1-3.el7.noarch 22/31
m-k8s-1.20:
m-k8s-1.20: Verifying : 4:perl-5.16.3-299.el7_9.x86_64 23/31
m-k8s-1.20:
m-k8s-1.20: Verifying : perl-File-Path-2.09-2.el7.noarch 24/31
m-k8s-1.20:
m-k8s-1.20: Verifying : perl-threads-1.87-4.el7.x86_64 25/31
m-k8s-1.20:
m-k8s-1.20: Verifying : 4:perl-Time-HiRes-1.9725-3.el7.x86_64 26/31
m-k8s-1.20:
m-k8s-1.20: Verifying : gpm-libs-1.20.7-6.el7.x86_64 27/31
m-k8s-1.20:
m-k8s-1.20: Verifying : perl-Filter-1.49-3.el7.x86_64 28/31
m-k8s-1.20:
m-k8s-1.20: Verifying : perl-Getopt-Long-2.40-3.el7.noarch 29/31
m-k8s-1.20:
m-k8s-1.20: Verifying : perl-Text-ParseWords-3.29-4.el7.noarch 30/31
m-k8s-1.20:
m-k8s-1.20: Verifying : 4:perl-libs-5.16.3-299.el7_9.x86_64 31/31
m-k8s-1.20:
m-k8s-1.20:
m-k8s-1.20: Installed:
m-k8s-1.20: vim-enhanced.x86_64 2:7.4.629-8.el7_9
m-k8s-1.20:
m-k8s-1.20: Dependency Installed:
m-k8s-1.20: gpm-libs.x86_64 0:1.20.7-6.el7
m-k8s-1.20: perl.x86_64 4:5.16.3-299.el7_9
m-k8s-1.20: perl-Carp.noarch 0:1.26-244.el7
m-k8s-1.20: perl-Encode.x86_64 0:2.51-7.el7
m-k8s-1.20: perl-Exporter.noarch 0:5.68-3.el7
m-k8s-1.20: perl-File-Path.noarch 0:2.09-2.el7
m-k8s-1.20: perl-File-Temp.noarch 0:0.23.01-3.el7
m-k8s-1.20: perl-Filter.x86_64 0:1.49-3.el7
m-k8s-1.20: perl-Getopt-Long.noarch 0:2.40-3.el7
m-k8s-1.20: perl-HTTP-Tiny.noarch 0:0.033-3.el7
m-k8s-1.20: perl-PathTools.x86_64 0:3.40-5.el7
m-k8s-1.20: perl-Pod-Escapes.noarch 1:1.04-299.el7_9
m-k8s-1.20: perl-Pod-Perldoc.noarch 0:3.20-4.el7
m-k8s-1.20: perl-Pod-Simple.noarch 1:3.28-4.el7
m-k8s-1.20: perl-Pod-Usage.noarch 0:1.63-3.el7
m-k8s-1.20: perl-Scalar-List-Utils.x86_64 0:1.27-248.el7
m-k8s-1.20: perl-Socket.x86_64 0:2.010-5.el7
m-k8s-1.20: perl-Storable.x86_64 0:2.45-3.el7
m-k8s-1.20: perl-Text-ParseWords.noarch 0:3.29-4.el7
m-k8s-1.20: perl-Time-HiRes.x86_64 4:1.9725-3.el7
m-k8s-1.20: perl-Time-Local.noarch 0:1.2300-2.el7
m-k8s-1.20: perl-constant.noarch 0:1.27-2.el7
m-k8s-1.20: perl-libs.x86_64 4:5.16.3-299.el7_9
m-k8s-1.20: perl-macros.x86_64 4:5.16.3-299.el7_9
m-k8s-1.20: perl-parent.noarch 1:0.225-244.el7
m-k8s-1.20: perl-podlators.noarch 0:2.5.1-3.el7
m-k8s-1.20: perl-threads.x86_64 0:1.87-4.el7
m-k8s-1.20: perl-threads-shared.x86_64 0:1.43-6.el7
m-k8s-1.20: vim-common.x86_64 2:7.4.629-8.el7_9
m-k8s-1.20: vim-filesystem.x86_64 2:7.4.629-8.el7_9
m-k8s-1.20: Complete!
m-k8s-1.20: Loaded plugins: fastestmirror
m-k8s-1.20: Loading mirror speeds from cached hostfile
m-k8s-1.20: * base: mirror.kakao.com
m-k8s-1.20: * epel: ftp.jaist.ac.jp
m-k8s-1.20: * extras: mirror.kakao.com
m-k8s-1.20: * updates: mirror.kakao.com
m-k8s-1.20: Resolving Dependencies
m-k8s-1.20: --> Running transaction check
m-k8s-1.20: ---> Package git.x86_64 0:1.8.3.1-23.el7_8 will be installed
m-k8s-1.20: --> Processing Dependency: perl-Git = 1.8.3.1-23.el7_8 for package: git-1.8.3.1-23.el7_8.x86_64
m-k8s-1.20: --> Processing Dependency: rsync for package: git-1.8.3.1-23.el7_8.x86_64
m-k8s-1.20: --> Processing Dependency: perl(Term::ReadKey) for package: git-1.8.3.1-23.el7_8.x86_64
m-k8s-1.20: --> Processing Dependency: perl(Git) for package: git-1.8.3.1-23.el7_8.x86_64
m-k8s-1.20: --> Processing Dependency: perl(Error) for package: git-1.8.3.1-23.el7_8.x86_64
m-k8s-1.20: --> Running transaction check
m-k8s-1.20: ---> Package perl-Error.noarch 1:0.17020-2.el7 will be installed
m-k8s-1.20: ---> Package perl-Git.noarch 0:1.8.3.1-23.el7_8 will be installed
m-k8s-1.20: ---> Package perl-TermReadKey.x86_64 0:2.30-20.el7 will be installed
m-k8s-1.20: ---> Package rsync.x86_64 0:3.1.2-10.el7 will be installed
m-k8s-1.20: --> Finished Dependency Resolution
m-k8s-1.20:
m-k8s-1.20: Dependencies Resolved
m-k8s-1.20:
m-k8s-1.20: ================================================================================
m-k8s-1.20: Package Arch Version Repository Size
m-k8s-1.20: ================================================================================
m-k8s-1.20: Installing:
m-k8s-1.20: git x86_64 1.8.3.1-23.el7_8 base 4.4 M
m-k8s-1.20: Installing for dependencies:
m-k8s-1.20: perl-Error noarch 1:0.17020-2.el7 base 32 k
m-k8s-1.20: perl-Git noarch 1.8.3.1-23.el7_8 base 56 k
m-k8s-1.20: perl-TermReadKey x86_64 2.30-20.el7 base 31 k
m-k8s-1.20: rsync x86_64 3.1.2-10.el7 base 404 k
m-k8s-1.20:
m-k8s-1.20: Transaction Summary
m-k8s-1.20: ================================================================================
m-k8s-1.20: Install 1 Package (+4 Dependent packages)
m-k8s-1.20: Total download size: 4.9 M
m-k8s-1.20: Installed size: 23 M
m-k8s-1.20: Downloading packages:
m-k8s-1.20: --------------------------------------------------------------------------------
m-k8s-1.20: Total 8.5 MB/s | 4.9 MB 00:00
m-k8s-1.20: Running transaction check
m-k8s-1.20: Running transaction test
m-k8s-1.20: Transaction test succeeded
m-k8s-1.20: Running transaction
m-k8s-1.20: Installing : 1:perl-Error-0.17020-2.el7.noarch 1/5
m-k8s-1.20:
m-k8s-1.20: Installing : rsync-3.1.2-10.el7.x86_64 2/5
m-k8s-1.20:
m-k8s-1.20: Installing : perl-TermReadKey-2.30-20.el7.x86_64 3/5
m-k8s-1.20:
m-k8s-1.20: Installing : perl-Git-1.8.3.1-23.el7_8.noarch 4/5
m-k8s-1.20:
m-k8s-1.20: Installing : git-1.8.3.1-23.el7_8.x86_64 5/5
m-k8s-1.20:
m-k8s-1.20: Verifying : git-1.8.3.1-23.el7_8.x86_64 1/5
m-k8s-1.20:
m-k8s-1.20: Verifying : 1:perl-Error-0.17020-2.el7.noarch 2/5
m-k8s-1.20:
m-k8s-1.20: Verifying : perl-TermReadKey-2.30-20.el7.x86_64 3/5
m-k8s-1.20:
m-k8s-1.20: Verifying : perl-Git-1.8.3.1-23.el7_8.noarch 4/5
m-k8s-1.20:
m-k8s-1.20: Verifying : rsync-3.1.2-10.el7.x86_64 5/5
m-k8s-1.20:
m-k8s-1.20:
m-k8s-1.20: Installed:
m-k8s-1.20: git.x86_64 0:1.8.3.1-23.el7_8
m-k8s-1.20:
m-k8s-1.20: Dependency Installed:
m-k8s-1.20: perl-Error.noarch 1:0.17020-2.el7 perl-Git.noarch 0:1.8.3.1-23.el7_8
m-k8s-1.20: perl-TermReadKey.x86_64 0:2.30-20.el7 rsync.x86_64 0:3.1.2-10.el7
m-k8s-1.20: Complete!
m-k8s-1.20: Loaded plugins: fastestmirror
m-k8s-1.20: Loading mirror speeds from cached hostfile
m-k8s-1.20: * base: mirror.kakao.com
m-k8s-1.20: * epel: ftp.jaist.ac.jp
m-k8s-1.20: * extras: mirror.kakao.com
m-k8s-1.20: * updates: mirror.kakao.com
m-k8s-1.20: Resolving Dependencies
m-k8s-1.20: --> Running transaction check
m-k8s-1.20: ---> Package containerd.io.x86_64 0:1.3.9-3.1.el7 will be installed
m-k8s-1.20: --> Processing Dependency: container-selinux >= 2:2.74 for package: containerd.io-1.3.9-3.1.el7.x86_64
m-k8s-1.20: ---> Package docker-ce.x86_64 3:19.03.14-3.el7 will be installed
m-k8s-1.20: --> Processing Dependency: libcgroup for package: 3:docker-ce-19.03.14-3.el7.x86_64
m-k8s-1.20: ---> Package docker-ce-cli.x86_64 1:19.03.14-3.el7 will be installed
m-k8s-1.20: --> Running transaction check
m-k8s-1.20: ---> Package container-selinux.noarch 2:2.119.2-1.911c772.el7_8 will be installed
m-k8s-1.20: --> Processing Dependency: policycoreutils-python for package: 2:container-selinux-2.119.2-1.911c772.el7_8.noarch
m-k8s-1.20: ---> Package libcgroup.x86_64 0:0.41-21.el7 will be installed
m-k8s-1.20: --> Running transaction check
m-k8s-1.20: ---> Package policycoreutils-python.x86_64 0:2.5-34.el7 will be installed
m-k8s-1.20: --> Processing Dependency: setools-libs >= 3.3.8-4 for package: policycoreutils-python-2.5-34.el7.x86_64
m-k8s-1.20: --> Processing Dependency: libsemanage-python >= 2.5-14 for package: policycoreutils-python-2.5-34.el7.x86_64
m-k8s-1.20: --> Processing Dependency: audit-libs-python >= 2.1.3-4 for package: policycoreutils-python-2.5-34.el7.x86_64
m-k8s-1.20: --> Processing Dependency: python-IPy for package: policycoreutils-python-2.5-34.el7.x86_64
m-k8s-1.20: --> Processing Dependency: libqpol.so.1(VERS_1.4)(64bit) for package: policycoreutils-python-2.5-34.el7.x86_64
m-k8s-1.20: --> Processing Dependency: libqpol.so.1(VERS_1.2)(64bit) for package: policycoreutils-python-2.5-34.el7.x86_64
m-k8s-1.20: --> Processing Dependency: libapol.so.4(VERS_4.0)(64bit) for package: policycoreutils-python-2.5-34.el7.x86_64
m-k8s-1.20: --> Processing Dependency: checkpolicy for package: policycoreutils-python-2.5-34.el7.x86_64
m-k8s-1.20: --> Processing Dependency: libqpol.so.1()(64bit) for package: policycoreutils-python-2.5-34.el7.x86_64
m-k8s-1.20: --> Processing Dependency: libapol.so.4()(64bit) for package: policycoreutils-python-2.5-34.el7.x86_64
m-k8s-1.20: --> Running transaction check
m-k8s-1.20: ---> Package audit-libs-python.x86_64 0:2.8.5-4.el7 will be installed
m-k8s-1.20: ---> Package checkpolicy.x86_64 0:2.5-8.el7 will be installed
m-k8s-1.20: ---> Package libsemanage-python.x86_64 0:2.5-14.el7 will be installed
m-k8s-1.20: ---> Package python-IPy.noarch 0:0.75-6.el7 will be installed
m-k8s-1.20: ---> Package setools-libs.x86_64 0:3.3.8-4.el7 will be installed
m-k8s-1.20: --> Finished Dependency Resolution
m-k8s-1.20:
m-k8s-1.20: Dependencies Resolved
m-k8s-1.20:
m-k8s-1.20: ================================================================================
m-k8s-1.20: Package Arch Version Repository Size
m-k8s-1.20: ================================================================================
m-k8s-1.20: Installing:
m-k8s-1.20: containerd.io x86_64 1.3.9-3.1.el7 docker-ce-stable 29 M
m-k8s-1.20: docker-ce x86_64 3:19.03.14-3.el7 docker-ce-stable 24 M
m-k8s-1.20: docker-ce-cli x86_64 1:19.03.14-3.el7 docker-ce-stable 38 M
m-k8s-1.20: Installing for dependencies:
m-k8s-1.20: audit-libs-python x86_64 2.8.5-4.el7 base 76 k
m-k8s-1.20: checkpolicy x86_64 2.5-8.el7 base 295 k
m-k8s-1.20: container-selinux noarch 2:2.119.2-1.911c772.el7_8 extras 40 k
m-k8s-1.20: libcgroup x86_64 0.41-21.el7 base 66 k
m-k8s-1.20: libsemanage-python x86_64 2.5-14.el7 base 113 k
m-k8s-1.20: policycoreutils-python x86_64 2.5-34.el7 base 457 k
m-k8s-1.20: python-IPy noarch 0.75-6.el7 base 32 k
m-k8s-1.20: setools-libs x86_64 3.3.8-4.el7 base 620 k
m-k8s-1.20:
m-k8s-1.20: Transaction Summary
m-k8s-1.20: ================================================================================
m-k8s-1.20: Install 3 Packages (+8 Dependent packages)
m-k8s-1.20: Total download size: 93 M
m-k8s-1.20: Installed size: 393 M
m-k8s-1.20: Downloading packages:
m-k8s-1.20: warning:
m-k8s-1.20: /var/cache/yum/x86_64/7/docker-ce-stable/packages/containerd.io-1.3.9-3.1.el7.x86_64.rpm: Header V4 RSA/SHA512 Signature, key ID 621e9f35: NOKEY
m-k8s-1.20: Public key for containerd.io-1.3.9-3.1.el7.x86_64.rpm is not installed
m-k8s-1.20: --------------------------------------------------------------------------------
m-k8s-1.20: Total 10 MB/s | 93 MB 00:09
m-k8s-1.20: Retrieving key from https://download.docker.com/linux/centos/gpg
m-k8s-1.20: Importing GPG key 0x621E9F35:
m-k8s-1.20: Userid : "Docker Release (CE rpm) <docker@docker.com>"
m-k8s-1.20: Fingerprint: 060a 61c5 1b55 8a7f 742b 77aa c52f eb6b 621e 9f35
m-k8s-1.20: From : https://download.docker.com/linux/centos/gpg
m-k8s-1.20: Running transaction check
m-k8s-1.20: Running transaction test
m-k8s-1.20: Transaction test succeeded
m-k8s-1.20: Running transaction
m-k8s-1.20: Installing : libcgroup-0.41-21.el7.x86_64 1/11
m-k8s-1.20:
m-k8s-1.20: Installing : setools-libs-3.3.8-4.el7.x86_64 2/11
m-k8s-1.20:
m-k8s-1.20: Installing : 1:docker-ce-cli-19.03.14-3.el7.x86_64 3/11
m-k8s-1.20:
m-k8s-1.20: Installing : audit-libs-python-2.8.5-4.el7.x86_64 4/11
m-k8s-1.20:
m-k8s-1.20: Installing : python-IPy-0.75-6.el7.noarch 5/11
m-k8s-1.20:
m-k8s-1.20: Installing : libsemanage-python-2.5-14.el7.x86_64 6/11
m-k8s-1.20:
m-k8s-1.20: Installing : checkpolicy-2.5-8.el7.x86_64 7/11
m-k8s-1.20:
m-k8s-1.20: Installing : policycoreutils-python-2.5-34.el7.x86_64 8/11
m-k8s-1.20:
m-k8s-1.20: Installing : 2:container-selinux-2.119.2-1.911c772.el7_8.noarch 9/11
m-k8s-1.20:
m-k8s-1.20: Installing : containerd.io-1.3.9-3.1.el7.x86_64 10/11
m-k8s-1.20:
m-k8s-1.20: Installing : 3:docker-ce-19.03.14-3.el7.x86_64 11/11
m-k8s-1.20:
m-k8s-1.20: Verifying : checkpolicy-2.5-8.el7.x86_64 1/11
m-k8s-1.20:
m-k8s-1.20: Verifying : 3:docker-ce-19.03.14-3.el7.x86_64 2/11
m-k8s-1.20:
m-k8s-1.20: Verifying : containerd.io-1.3.9-3.1.el7.x86_64 3/11
m-k8s-1.20:
m-k8s-1.20: Verifying : libsemanage-python-2.5-14.el7.x86_64 4/11
m-k8s-1.20:
m-k8s-1.20: Verifying : 2:container-selinux-2.119.2-1.911c772.el7_8.noarch 5/11
m-k8s-1.20:
m-k8s-1.20: Verifying : python-IPy-0.75-6.el7.noarch 6/11
m-k8s-1.20:
m-k8s-1.20: Verifying : policycoreutils-python-2.5-34.el7.x86_64 7/11
m-k8s-1.20:
m-k8s-1.20: Verifying : audit-libs-python-2.8.5-4.el7.x86_64 8/11
m-k8s-1.20:
m-k8s-1.20: Verifying : 1:docker-ce-cli-19.03.14-3.el7.x86_64 9/11
m-k8s-1.20:
m-k8s-1.20: Verifying : setools-libs-3.3.8-4.el7.x86_64 10/11
m-k8s-1.20:
m-k8s-1.20: Verifying : libcgroup-0.41-21.el7.x86_64 11/11
m-k8s-1.20:
m-k8s-1.20:
m-k8s-1.20: Installed:
m-k8s-1.20: containerd.io.x86_64 0:1.3.9-3.1.el7 docker-ce.x86_64 3:19.03.14-3.el7
m-k8s-1.20: docker-ce-cli.x86_64 1:19.03.14-3.el7
m-k8s-1.20:
m-k8s-1.20: Dependency Installed:
m-k8s-1.20: audit-libs-python.x86_64 0:2.8.5-4.el7
m-k8s-1.20: checkpolicy.x86_64 0:2.5-8.el7
m-k8s-1.20: container-selinux.noarch 2:2.119.2-1.911c772.el7_8
m-k8s-1.20: libcgroup.x86_64 0:0.41-21.el7
m-k8s-1.20: libsemanage-python.x86_64 0:2.5-14.el7
m-k8s-1.20: policycoreutils-python.x86_64 0:2.5-34.el7
m-k8s-1.20: python-IPy.noarch 0:0.75-6.el7
m-k8s-1.20: setools-libs.x86_64 0:3.3.8-4.el7
m-k8s-1.20: Complete!
m-k8s-1.20: Loaded plugins: fastestmirror
m-k8s-1.20: Loading mirror speeds from cached hostfile
m-k8s-1.20: * base: mirror.kakao.com
m-k8s-1.20: * epel: ftp.jaist.ac.jp
m-k8s-1.20: * extras: mirror.kakao.com
m-k8s-1.20: * updates: mirror.kakao.com
m-k8s-1.20: Resolving Dependencies
m-k8s-1.20: --> Running transaction check
m-k8s-1.20: ---> Package kubeadm.x86_64 0:1.20.2-0 will be installed
m-k8s-1.20: --> Processing Dependency: kubernetes-cni >= 0.8.6 for package: kubeadm-1.20.2-0.x86_64
m-k8s-1.20: --> Processing Dependency: cri-tools >= 1.13.0 for package: kubeadm-1.20.2-0.x86_64
m-k8s-1.20: ---> Package kubectl.x86_64 0:1.20.2-0 will be installed
m-k8s-1.20: ---> Package kubelet.x86_64 0:1.20.2-0 will be installed
m-k8s-1.20: --> Processing Dependency: socat for package: kubelet-1.20.2-0.x86_64
m-k8s-1.20: --> Processing Dependency: conntrack for package: kubelet-1.20.2-0.x86_64
m-k8s-1.20: --> Running transaction check
m-k8s-1.20: ---> Package conntrack-tools.x86_64 0:1.4.4-7.el7 will be installed
m-k8s-1.20: --> Processing Dependency: libnetfilter_cttimeout.so.1(LIBNETFILTER_CTTIMEOUT_1.1)(64bit) for package: conntrack-tools-1.4.4-7.el7.x86_64
m-k8s-1.20: --> Processing Dependency: libnetfilter_cttimeout.so.1(LIBNETFILTER_CTTIMEOUT_1.0)(64bit) for package: conntrack-tools-1.4.4-7.el7.x86_64
m-k8s-1.20: --> Processing Dependency: libnetfilter_cthelper.so.0(LIBNETFILTER_CTHELPER_1.0)(64bit) for package: conntrack-tools-1.4.4-7.el7.x86_64
m-k8s-1.20: --> Processing Dependency: libnetfilter_queue.so.1()(64bit) for package: conntrack-tools-1.4.4-7.el7.x86_64
m-k8s-1.20: --> Processing Dependency: libnetfilter_cttimeout.so.1()(64bit) for package: conntrack-tools-1.4.4-7.el7.x86_64
m-k8s-1.20: --> Processing Dependency: libnetfilter_cthelper.so.0()(64bit) for package: conntrack-tools-1.4.4-7.el7.x86_64
m-k8s-1.20: ---> Package cri-tools.x86_64 0:1.13.0-0 will be installed
m-k8s-1.20: ---> Package kubernetes-cni.x86_64 0:0.8.7-0 will be installed
m-k8s-1.20: ---> Package socat.x86_64 0:1.7.3.2-2.el7 will be installed
m-k8s-1.20: --> Running transaction check
m-k8s-1.20: ---> Package libnetfilter_cthelper.x86_64 0:1.0.0-11.el7 will be installed
m-k8s-1.20: ---> Package libnetfilter_cttimeout.x86_64 0:1.0.0-7.el7 will be installed
m-k8s-1.20: ---> Package libnetfilter_queue.x86_64 0:1.0.2-2.el7_2 will be installed
m-k8s-1.20: --> Finished Dependency Resolution
m-k8s-1.20:
m-k8s-1.20: Dependencies Resolved
m-k8s-1.20:
m-k8s-1.20: ================================================================================
m-k8s-1.20: Package Arch Version Repository Size
m-k8s-1.20: ================================================================================
m-k8s-1.20: Installing:
m-k8s-1.20: kubeadm x86_64 1.20.2-0 kubernetes 8.3 M
m-k8s-1.20: kubectl x86_64 1.20.2-0 kubernetes 8.5 M
m-k8s-1.20: kubelet x86_64 1.20.2-0 kubernetes 20 M
m-k8s-1.20: Installing for dependencies:
m-k8s-1.20: conntrack-tools x86_64 1.4.4-7.el7 base 187 k
m-k8s-1.20: cri-tools x86_64 1.13.0-0 kubernetes 5.1 M
m-k8s-1.20: kubernetes-cni x86_64 0.8.7-0 kubernetes 19 M
m-k8s-1.20: libnetfilter_cthelper x86_64 1.0.0-11.el7 base 18 k
m-k8s-1.20: libnetfilter_cttimeout x86_64 1.0.0-7.el7 base 18 k
m-k8s-1.20: libnetfilter_queue x86_64 1.0.2-2.el7_2 base 23 k
m-k8s-1.20: socat x86_64 1.7.3.2-2.el7 base 290 k
m-k8s-1.20:
m-k8s-1.20: Transaction Summary
m-k8s-1.20: ================================================================================
m-k8s-1.20: Install 3 Packages (+7 Dependent packages)
m-k8s-1.20: Total download size: 61 M
m-k8s-1.20: Installed size: 262 M
m-k8s-1.20: Downloading packages:
m-k8s-1.20: warning: /var/cache/yum/x86_64/7/kubernetes/packages/14bfe6e75a9efc8eca3f638eb22c7e2ce759c67f95b43b16fae4ebabde1549f3-cri-tools-1.13.0-0.x86_64.rpm: Header V4 RSA/SHA512 Signature, key ID 3e1ba8d5: NOKEY
m-k8s-1.20: Public key for 14bfe6e75a9efc8eca3f638eb22c7e2ce759c67f95b43b16fae4ebabde1549f3-cri-tools-1.13.0-0.x86_64.rpm is not installed
m-k8s-1.20: --------------------------------------------------------------------------------
m-k8s-1.20: Total 8.3 MB/s | 61 MB 00:07
m-k8s-1.20: Retrieving key from https://packages.cloud.google.com/yum/doc/yum-key.gpg
m-k8s-1.20: Importing GPG key 0xA7317B0F:
m-k8s-1.20: Userid : "Google Cloud Packages Automatic Signing Key <gc-team@google.com>"
m-k8s-1.20: Fingerprint: d0bc 747f d8ca f711 7500 d6fa 3746 c208 a731 7b0f
m-k8s-1.20: From : https://packages.cloud.google.com/yum/doc/yum-key.gpg
m-k8s-1.20: Importing GPG key 0xBA07F4FB:
m-k8s-1.20: Userid : "Google Cloud Packages Automatic Signing Key <gc-team@google.com>"
m-k8s-1.20: Fingerprint: 54a6 47f9 048d 5688 d7da 2abe 6a03 0b21 ba07 f4fb
m-k8s-1.20: From : https://packages.cloud.google.com/yum/doc/yum-key.gpg
m-k8s-1.20: Retrieving key from https://packages.cloud.google.com/yum/doc/rpm-package-key.gpg
m-k8s-1.20: Importing GPG key 0x3E1BA8D5:
m-k8s-1.20: Userid : "Google Cloud Packages RPM Signing Key <gc-team@google.com>"
m-k8s-1.20: Fingerprint: 3749 e1ba 95a8 6ce0 5454 6ed2 f09c 394c 3e1b a8d5
m-k8s-1.20: From : https://packages.cloud.google.com/yum/doc/rpm-package-key.gpg
m-k8s-1.20: Running transaction check
m-k8s-1.20: Running transaction test
m-k8s-1.20: Transaction test succeeded
m-k8s-1.20: Running transaction
m-k8s-1.20: Installing : libnetfilter_cthelper-1.0.0-11.el7.x86_64 1/10
m-k8s-1.20:
m-k8s-1.20: Installing : socat-1.7.3.2-2.el7.x86_64 2/10
m-k8s-1.20:
m-k8s-1.20: Installing : libnetfilter_cttimeout-1.0.0-7.el7.x86_64 3/10
m-k8s-1.20:
m-k8s-1.20: Installing : kubectl-1.20.2-0.x86_64 4/10
m-k8s-1.20:
m-k8s-1.20: Installing : libnetfilter_queue-1.0.2-2.el7_2.x86_64 5/10
m-k8s-1.20:
m-k8s-1.20: Installing : conntrack-tools-1.4.4-7.el7.x86_64 6/10
m-k8s-1.20:
m-k8s-1.20: Installing : kubernetes-cni-0.8.7-0.x86_64 7/10
m-k8s-1.20:
m-k8s-1.20: Installing : kubelet-1.20.2-0.x86_64 8/10
m-k8s-1.20:
m-k8s-1.20: Installing : cri-tools-1.13.0-0.x86_64 9/10
m-k8s-1.20:
m-k8s-1.20: Installing : kubeadm-1.20.2-0.x86_64 10/10
m-k8s-1.20:
m-k8s-1.20: Verifying : conntrack-tools-1.4.4-7.el7.x86_64 1/10
m-k8s-1.20:
m-k8s-1.20: Verifying : kubernetes-cni-0.8.7-0.x86_64 2/10
m-k8s-1.20:
m-k8s-1.20: Verifying : kubelet-1.20.2-0.x86_64 3/10
m-k8s-1.20:
m-k8s-1.20: Verifying : kubeadm-1.20.2-0.x86_64 4/10
m-k8s-1.20:
m-k8s-1.20: Verifying : cri-tools-1.13.0-0.x86_64 5/10
m-k8s-1.20:
m-k8s-1.20: Verifying : libnetfilter_queue-1.0.2-2.el7_2.x86_64 6/10
m-k8s-1.20:
m-k8s-1.20: Verifying : kubectl-1.20.2-0.x86_64 7/10
m-k8s-1.20:
m-k8s-1.20: Verifying : libnetfilter_cttimeout-1.0.0-7.el7.x86_64 8/10
m-k8s-1.20:
m-k8s-1.20: Verifying : socat-1.7.3.2-2.el7.x86_64 9/10
m-k8s-1.20:
m-k8s-1.20: Verifying : libnetfilter_cthelper-1.0.0-11.el7.x86_64 10/10
m-k8s-1.20:
m-k8s-1.20:
m-k8s-1.20: Installed:
m-k8s-1.20: kubeadm.x86_64 0:1.20.2-0 kubectl.x86_64 0:1.20.2-0 kubelet.x86_64 0:1.20.2-0
m-k8s-1.20:
m-k8s-1.20: Dependency Installed:
m-k8s-1.20: conntrack-tools.x86_64 0:1.4.4-7.el7
m-k8s-1.20: cri-tools.x86_64 0:1.13.0-0
m-k8s-1.20: kubernetes-cni.x86_64 0:0.8.7-0
m-k8s-1.20: libnetfilter_cthelper.x86_64 0:1.0.0-11.el7
m-k8s-1.20: libnetfilter_cttimeout.x86_64 0:1.0.0-7.el7
m-k8s-1.20: libnetfilter_queue.x86_64 0:1.0.2-2.el7_2
m-k8s-1.20: socat.x86_64 0:1.7.3.2-2.el7
m-k8s-1.20: Complete!
m-k8s-1.20: Created symlink from /etc/systemd/system/multi-user.target.wants/docker.service to /usr/lib/systemd/system/docker.service.
m-k8s-1.20: Created symlink from /etc/systemd/system/multi-user.target.wants/kubelet.service to /usr/lib/systemd/system/kubelet.service.
==> m-k8s-1.20: Running provisioner: shell...
m-k8s-1.20: Running: /tmp/vagrant-shell20210329-63160-4uu89e.sh
m-k8s-1.20: [init] Using Kubernetes version: v1.20.5
m-k8s-1.20: [preflight] Running pre-flight checks
m-k8s-1.20: [WARNING IsDockerSystemdCheck]: detected "cgroupfs" as the Docker cgroup driver. The recommended driver is "systemd". Please follow the guide at https://kubernetes.io/docs/setup/cri/
m-k8s-1.20: [preflight] Pulling images required for setting up a Kubernetes cluster
m-k8s-1.20: [preflight] This might take a minute or two, depending on the speed of your internet connection
m-k8s-1.20: [preflight] You can also perform this action in beforehand using 'kubeadm config images pull'
m-k8s-1.20: [certs] Using certificateDir folder "/etc/kubernetes/pki"
m-k8s-1.20: [certs] Generating "ca" certificate and key
m-k8s-1.20: [certs] Generating "apiserver" certificate and key
m-k8s-1.20: [certs] apiserver serving cert is signed for DNS names [kubernetes kubernetes.default kubernetes.default.svc kubernetes.default.svc.cluster.local m-k8s] and IPs [10.96.0.1 192.168.1.10]
m-k8s-1.20: [certs] Generating "apiserver-kubelet-client" certificate and key
m-k8s-1.20: [certs] Generating "front-proxy-ca" certificate and key
m-k8s-1.20: [certs] Generating "front-proxy-client" certificate and key
m-k8s-1.20: [certs] Generating "etcd/ca" certificate and key
m-k8s-1.20: [certs] Generating "etcd/server" certificate and key
m-k8s-1.20: [certs] etcd/server serving cert is signed for DNS names [localhost m-k8s] and IPs [192.168.1.10 127.0.0.1 ::1]
m-k8s-1.20: [certs] Generating "etcd/peer" certificate and key
m-k8s-1.20: [certs] etcd/peer serving cert is signed for DNS names [localhost m-k8s] and IPs [192.168.1.10 127.0.0.1 ::1]
m-k8s-1.20: [certs] Generating "etcd/healthcheck-client" certificate and key
m-k8s-1.20: [certs] Generating "apiserver-etcd-client" certificate and key
m-k8s-1.20: [certs] Generating "sa" key and public key
m-k8s-1.20: [kubeconfig] Using kubeconfig folder "/etc/kubernetes"
m-k8s-1.20: [kubeconfig] Writing "admin.conf" kubeconfig file
m-k8s-1.20: [kubeconfig] Writing "kubelet.conf" kubeconfig file
m-k8s-1.20: [kubeconfig] Writing "controller-manager.conf" kubeconfig file
m-k8s-1.20: [kubeconfig] Writing "scheduler.conf" kubeconfig file
m-k8s-1.20: [kubelet-start] Writing kubelet environment file with flags to file "/var/lib/kubelet/kubeadm-flags.env"
m-k8s-1.20: [kubelet-start] Writing kubelet configuration to file "/var/lib/kubelet/config.yaml"
m-k8s-1.20: [kubelet-start] Starting the kubelet
m-k8s-1.20: [control-plane] Using manifest folder "/etc/kubernetes/manifests"
m-k8s-1.20: [control-plane] Creating static Pod manifest for "kube-apiserver"
m-k8s-1.20: [control-plane] Creating static Pod manifest for "kube-controller-manager"
m-k8s-1.20: [control-plane] Creating static Pod manifest for "kube-scheduler"
m-k8s-1.20: [etcd] Creating static Pod manifest for local etcd in "/etc/kubernetes/manifests"
m-k8s-1.20: [wait-control-plane] Waiting for the kubelet to boot up the control plane as static Pods from directory "/etc/kubernetes/manifests". This can take up to 4m0s
m-k8s-1.20: [apiclient] All control plane components are healthy after 14.506256 seconds
m-k8s-1.20: [upload-config] Storing the configuration used in ConfigMap "kubeadm-config" in the "kube-system" Namespace
m-k8s-1.20: [kubelet] Creating a ConfigMap "kubelet-config-1.20" in namespace kube-system with the configuration for the kubelets in the cluster
m-k8s-1.20: [upload-certs] Skipping phase. Please see --upload-certs
m-k8s-1.20: [mark-control-plane] Marking the node m-k8s as control-plane by adding the labels "node-role.kubernetes.io/master=''" and "node-role.kubernetes.io/control-plane='' (deprecated)"
m-k8s-1.20: [mark-control-plane] Marking the node m-k8s as control-plane by adding the taints [node-role.kubernetes.io/master:NoSchedule]
m-k8s-1.20: [bootstrap-token] Using token: 123456.1234567890123456
m-k8s-1.20: [bootstrap-token] Configuring bootstrap tokens, cluster-info ConfigMap, RBAC Roles
m-k8s-1.20: [bootstrap-token] configured RBAC rules to allow Node Bootstrap tokens to get nodes
m-k8s-1.20: [bootstrap-token] configured RBAC rules to allow Node Bootstrap tokens to post CSRs in order for nodes to get long term certificate credentials
m-k8s-1.20: [bootstrap-token] configured RBAC rules to allow the csrapprover controller automatically approve CSRs from a Node Bootstrap Token
m-k8s-1.20: [bootstrap-token] configured RBAC rules to allow certificate rotation for all node client certificates in the cluster
m-k8s-1.20: [bootstrap-token] Creating the "cluster-info" ConfigMap in the "kube-public" namespace
m-k8s-1.20: [kubelet-finalize] Updating "/etc/kubernetes/kubelet.conf" to point to a rotatable kubelet client certificate and key
m-k8s-1.20: [addons] Applied essential addon: CoreDNS
m-k8s-1.20: [addons] Applied essential addon: kube-proxy
m-k8s-1.20:
m-k8s-1.20: Your Kubernetes control-plane has initialized successfully!
m-k8s-1.20:
m-k8s-1.20: To start using your cluster, you need to run the following as a regular user:
m-k8s-1.20:
m-k8s-1.20: mkdir -p $HOME/.kube
m-k8s-1.20: sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config
m-k8s-1.20: sudo chown $(id -u):$(id -g) $HOME/.kube/config
m-k8s-1.20:
m-k8s-1.20: Alternatively, if you are the root user, you can run:
m-k8s-1.20:
m-k8s-1.20: export KUBECONFIG=/etc/kubernetes/admin.conf
m-k8s-1.20:
m-k8s-1.20: You should now deploy a pod network to the cluster.
m-k8s-1.20: Run "kubectl apply -f [podnetwork].yaml" with one of the options listed at:
m-k8s-1.20: https://kubernetes.io/docs/concepts/cluster-administration/addons/
m-k8s-1.20:
m-k8s-1.20: Then you can join any number of worker nodes by running the following on each as root:
m-k8s-1.20:
m-k8s-1.20: kubeadm join 192.168.1.10:6443 --token 123456.1234567890123456 \
m-k8s-1.20: --discovery-token-ca-cert-hash sha256:ac90e4929a250facb1a556830436ca15740ddc9eaf104c8fd8e8afc58acbf089
m-k8s-1.20: configmap/calico-config created
m-k8s-1.20: customresourcedefinition.apiextensions.k8s.io/bgpconfigurations.crd.projectcalico.org created
m-k8s-1.20: customresourcedefinition.apiextensions.k8s.io/bgppeers.crd.projectcalico.org created
m-k8s-1.20: customresourcedefinition.apiextensions.k8s.io/blockaffinities.crd.projectcalico.org created
m-k8s-1.20: customresourcedefinition.apiextensions.k8s.io/clusterinformations.crd.projectcalico.org created
m-k8s-1.20: customresourcedefinition.apiextensions.k8s.io/felixconfigurations.crd.projectcalico.org created
m-k8s-1.20: customresourcedefinition.apiextensions.k8s.io/globalnetworkpolicies.crd.projectcalico.org created
m-k8s-1.20: customresourcedefinition.apiextensions.k8s.io/globalnetworksets.crd.projectcalico.org created
m-k8s-1.20: customresourcedefinition.apiextensions.k8s.io/hostendpoints.crd.projectcalico.org created
m-k8s-1.20: customresourcedefinition.apiextensions.k8s.io/ipamblocks.crd.projectcalico.org created
m-k8s-1.20: customresourcedefinition.apiextensions.k8s.io/ipamconfigs.crd.projectcalico.org created
m-k8s-1.20: customresourcedefinition.apiextensions.k8s.io/ipamhandles.crd.projectcalico.org created
m-k8s-1.20: customresourcedefinition.apiextensions.k8s.io/ippools.crd.projectcalico.org created
m-k8s-1.20: customresourcedefinition.apiextensions.k8s.io/kubecontrollersconfigurations.crd.projectcalico.org created
m-k8s-1.20: customresourcedefinition.apiextensions.k8s.io/networkpolicies.crd.projectcalico.org created
m-k8s-1.20: customresourcedefinition.apiextensions.k8s.io/networksets.crd.projectcalico.org created
m-k8s-1.20: clusterrole.rbac.authorization.k8s.io/calico-kube-controllers created
m-k8s-1.20: clusterrolebinding.rbac.authorization.k8s.io/calico-kube-controllers created
m-k8s-1.20: clusterrole.rbac.authorization.k8s.io/calico-node created
m-k8s-1.20: clusterrolebinding.rbac.authorization.k8s.io/calico-node created
m-k8s-1.20: daemonset.apps/calico-node created
m-k8s-1.20: serviceaccount/calico-node created
m-k8s-1.20: deployment.apps/calico-kube-controllers created
m-k8s-1.20: serviceaccount/calico-kube-controllers created
m-k8s-1.20: poddisruptionbudget.policy/calico-kube-controllers created
m-k8s-1.20: Loaded plugins: fastestmirror
m-k8s-1.20: Loading mirror speeds from cached hostfile
m-k8s-1.20: * base: mirror.kakao.com
m-k8s-1.20: * epel: ftp.jaist.ac.jp
m-k8s-1.20: * extras: mirror.kakao.com
m-k8s-1.20: * updates: mirror.kakao.com
m-k8s-1.20: Resolving Dependencies
m-k8s-1.20: --> Running transaction check
m-k8s-1.20: ---> Package bash-completion.noarch 1:2.1-8.el7 will be installed
m-k8s-1.20: --> Finished Dependency Resolution
m-k8s-1.20:
m-k8s-1.20: Dependencies Resolved
m-k8s-1.20:
m-k8s-1.20: ================================================================================
m-k8s-1.20: Package Arch Version Repository Size
m-k8s-1.20: ================================================================================
m-k8s-1.20: Installing:
m-k8s-1.20: bash-completion noarch 1:2.1-8.el7 base 87 k
m-k8s-1.20:
m-k8s-1.20: Transaction Summary
m-k8s-1.20: ================================================================================
m-k8s-1.20: Install 1 Package
m-k8s-1.20: Total download size: 87 k
m-k8s-1.20: Installed size: 263 k
m-k8s-1.20: Downloading packages:
m-k8s-1.20: Running transaction check
m-k8s-1.20: Running transaction test
m-k8s-1.20: Transaction test succeeded
m-k8s-1.20: Running transaction
m-k8s-1.20: Installing : 1:bash-completion-2.1-8.el7.noarch 1/1
m-k8s-1.20:
m-k8s-1.20: Verifying : 1:bash-completion-2.1-8.el7.noarch 1/1
m-k8s-1.20:
m-k8s-1.20:
m-k8s-1.20: Installed:
m-k8s-1.20: bash-completion.noarch 1:2.1-8.el7
m-k8s-1.20: Complete!
m-k8s-1.20: Cloning into '_Lecture_k8s.starterkit'...
==> w1-k8s-1.20: Importing base box 'sysnet4admin/CentOS-k8s'...
==> w1-k8s-1.20: Matching MAC address for NAT networking...
==> w1-k8s-1.20: Checking if box 'sysnet4admin/CentOS-k8s' version '0.7.4' is up to date...
==> w1-k8s-1.20: Setting the name of the VM: w1-k8s-1.20(github_SysNet4Admin)
==> w1-k8s-1.20: Clearing any previously set network interfaces...
==> w1-k8s-1.20: Preparing network interfaces based on configuration...
w1-k8s-1.20: Adapter 1: nat
w1-k8s-1.20: Adapter 2: hostonly
==> w1-k8s-1.20: Forwarding ports...
w1-k8s-1.20: 22 (guest) => 60101 (host) (adapter 1)
==> w1-k8s-1.20: Running 'pre-boot' VM customizations...
==> w1-k8s-1.20: Booting VM...
==> w1-k8s-1.20: Waiting for machine to boot. This may take a few minutes...
w1-k8s-1.20: SSH address: 127.0.0.1:60101
w1-k8s-1.20: SSH username: vagrant
w1-k8s-1.20: SSH auth method: private key
w1-k8s-1.20:
w1-k8s-1.20: Vagrant insecure key detected. Vagrant will automatically replace
w1-k8s-1.20: this with a newly generated keypair for better security.
w1-k8s-1.20:
w1-k8s-1.20: Inserting generated public key within guest...
w1-k8s-1.20: Removing insecure key from the guest if it's present...
w1-k8s-1.20: Key inserted! Disconnecting and reconnecting using new SSH key...
==> w1-k8s-1.20: Machine booted and ready!
==> w1-k8s-1.20: Checking for guest additions in VM...
w1-k8s-1.20: The guest additions on this VM do not match the installed version of
w1-k8s-1.20: VirtualBox! In most cases this is fine, but in rare cases it can
w1-k8s-1.20: prevent things such as shared folders from working properly. If you see
w1-k8s-1.20: shared folder errors, please make sure the guest additions within the
w1-k8s-1.20: virtual machine match the version of VirtualBox you have installed on
w1-k8s-1.20: your host and reload your VM.
w1-k8s-1.20:
w1-k8s-1.20: Guest Additions Version: 5.2.12
w1-k8s-1.20: VirtualBox Version: 6.1
==> w1-k8s-1.20: Setting hostname...
==> w1-k8s-1.20: Configuring and enabling network interfaces...
==> w1-k8s-1.20: Running provisioner: shell...
w1-k8s-1.20: Running: /tmp/vagrant-shell20210329-63160-cxicz0.sh
w1-k8s-1.20: Loaded plugins: fastestmirror
w1-k8s-1.20: Determining fastest mirrors
w1-k8s-1.20: * base: mirror.navercorp.com
w1-k8s-1.20: * extras: mirror.navercorp.com
w1-k8s-1.20: * updates: mirror.navercorp.com
w1-k8s-1.20: Package yum-utils-1.1.31-54.el7_8.noarch already installed and latest version
w1-k8s-1.20: Nothing to do
w1-k8s-1.20: Loaded plugins: fastestmirror
w1-k8s-1.20: adding repo from: https://download.docker.com/linux/centos/docker-ce.repo
w1-k8s-1.20: grabbing file https://download.docker.com/linux/centos/docker-ce.repo to /etc/yum.repos.d/docker-ce.repo
w1-k8s-1.20: repo saved to /etc/yum.repos.d/docker-ce.repo
==> w1-k8s-1.20: Running provisioner: shell...
w1-k8s-1.20: Running: /tmp/vagrant-shell20210329-63160-1dunszi.sh
w1-k8s-1.20: Loaded plugins: fastestmirror
w1-k8s-1.20: Loading mirror speeds from cached hostfile
w1-k8s-1.20: * base: mirror.navercorp.com
w1-k8s-1.20: * extras: mirror.navercorp.com
w1-k8s-1.20: * updates: mirror.navercorp.com
w1-k8s-1.20: Resolving Dependencies
w1-k8s-1.20: --> Running transaction check
w1-k8s-1.20: ---> Package epel-release.noarch 0:7-11 will be installed
w1-k8s-1.20: --> Finished Dependency Resolution
w1-k8s-1.20:
w1-k8s-1.20: Dependencies Resolved
w1-k8s-1.20:
w1-k8s-1.20: ================================================================================
w1-k8s-1.20: Package Arch Version Repository Size
w1-k8s-1.20: ================================================================================
w1-k8s-1.20: Installing:
w1-k8s-1.20: epel-release noarch 7-11 extras 15 k
w1-k8s-1.20:
w1-k8s-1.20: Transaction Summary
w1-k8s-1.20: ================================================================================
w1-k8s-1.20: Install 1 Package
w1-k8s-1.20: Total download size: 15 k
w1-k8s-1.20: Installed size: 24 k
w1-k8s-1.20: Downloading packages:
w1-k8s-1.20: Running transaction check
w1-k8s-1.20: Running transaction test
w1-k8s-1.20: Transaction test succeeded
w1-k8s-1.20: Running transaction
w1-k8s-1.20: Installing : epel-release-7-11.noarch 1/1
w1-k8s-1.20:
w1-k8s-1.20: Verifying : epel-release-7-11.noarch 1/1
w1-k8s-1.20:
w1-k8s-1.20:
w1-k8s-1.20: Installed:
w1-k8s-1.20: epel-release.noarch 0:7-11
w1-k8s-1.20: Complete!
w1-k8s-1.20: Loaded plugins: fastestmirror
w1-k8s-1.20: Loading mirror speeds from cached hostfile
w1-k8s-1.20:
w1-k8s-1.20:
w1-k8s-1.20: One of the configured repositories failed (Unknown),
w1-k8s-1.20: and yum doesn't have enough cached data to continue. At this point the only
w1-k8s-1.20: safe thing yum can do is fail. There are a few ways to work "fix" this:
w1-k8s-1.20:
w1-k8s-1.20: 1. Contact the upstream for the repository and get them to fix the problem.
w1-k8s-1.20:
w1-k8s-1.20: 2. Reconfigure the baseurl/etc. for the repository, to point to a working
w1-k8s-1.20: upstream. This is most often useful if you are using a newer
w1-k8s-1.20: distribution release than is supported by the repository (and the
w1-k8s-1.20: packages for the previous distribution release still work).
w1-k8s-1.20:
w1-k8s-1.20: 3. Run the command with the repository temporarily disabled
w1-k8s-1.20: yum --disablerepo=<repoid> ...
w1-k8s-1.20:
w1-k8s-1.20: 4. Disable the repository permanently, so yum won't use it by default. Yum
w1-k8s-1.20: will then just ignore the repository until you permanently enable it
w1-k8s-1.20: again or use --enablerepo for temporary usage:
w1-k8s-1.20:
w1-k8s-1.20: yum-config-manager --disable <repoid>
w1-k8s-1.20: or
w1-k8s-1.20: subscription-manager repos --disable=<repoid>
w1-k8s-1.20:
w1-k8s-1.20: 5. Configure the failing repository to be skipped, if it is unavailable.
w1-k8s-1.20: Note that yum will try to contact the repo. when it runs most commands,
w1-k8s-1.20: so will have to try and fail each time (and thus. yum will be be much
w1-k8s-1.20: slower). If it is a very temporary problem though, this is often a nice
w1-k8s-1.20: compromise:
w1-k8s-1.20:
w1-k8s-1.20: yum-config-manager --save --setopt=<repoid>.skip_if_unavailable=true
w1-k8s-1.20:
w1-k8s-1.20: Cannot retrieve metalink for repository: epel/x86_64. Please verify its path and try again
w1-k8s-1.20: Loaded plugins: fastestmirror
w1-k8s-1.20: Loading mirror speeds from cached hostfile
w1-k8s-1.20: * base: mirror.navercorp.com
w1-k8s-1.20: * epel: ftp.iij.ad.jp
w1-k8s-1.20: * extras: mirror.navercorp.com
w1-k8s-1.20: * updates: mirror.navercorp.com
w1-k8s-1.20: http://fedora.cs.nctu.edu.tw/epel/7/x86_64/repodata/962e01e9735b70ff47c1939b3abc9fcd44b57ed8697dcd739a7e9d9a29468064-updateinfo.xml.bz2: [Errno 14] HTTP Error 404 - Not Found
w1-k8s-1.20: Trying other mirror.
w1-k8s-1.20: To address this issue please refer to the below wiki article
w1-k8s-1.20:
w1-k8s-1.20: https://wiki.centos.org/yum-errors
w1-k8s-1.20:
w1-k8s-1.20: If above article doesn't help to resolve this issue please use https://bugs.centos.org/.
w1-k8s-1.20: Resolving Dependencies
w1-k8s-1.20: --> Running transaction check
w1-k8s-1.20: ---> Package git.x86_64 0:1.8.3.1-23.el7_8 will be installed
w1-k8s-1.20: --> Processing Dependency: perl-Git = 1.8.3.1-23.el7_8 for package: git-1.8.3.1-23.el7_8.x86_64
w1-k8s-1.20: --> Processing Dependency: perl >= 5.008 for package: git-1.8.3.1-23.el7_8.x86_64
w1-k8s-1.20: --> Processing Dependency: rsync for package: git-1.8.3.1-23.el7_8.x86_64
w1-k8s-1.20: --> Processing Dependency: perl(warnings) for package: git-1.8.3.1-23.el7_8.x86_64
w1-k8s-1.20: --> Processing Dependency: perl(vars) for package: git-1.8.3.1-23.el7_8.x86_64
w1-k8s-1.20: --> Processing Dependency: perl(strict) for package: git-1.8.3.1-23.el7_8.x86_64
w1-k8s-1.20: --> Processing Dependency: perl(lib) for package: git-1.8.3.1-23.el7_8.x86_64
w1-k8s-1.20: --> Processing Dependency: perl(Term::ReadKey) for package: git-1.8.3.1-23.el7_8.x86_64
w1-k8s-1.20: --> Processing Dependency: perl(Git) for package: git-1.8.3.1-23.el7_8.x86_64
w1-k8s-1.20: --> Processing Dependency: perl(Getopt::Long) for package: git-1.8.3.1-23.el7_8.x86_64
w1-k8s-1.20: --> Processing Dependency: perl(File::stat) for package: git-1.8.3.1-23.el7_8.x86_64
w1-k8s-1.20: --> Processing Dependency: perl(File::Temp) for package: git-1.8.3.1-23.el7_8.x86_64
w1-k8s-1.20: --> Processing Dependency: perl(File::Spec) for package: git-1.8.3.1-23.el7_8.x86_64
w1-k8s-1.20: --> Processing Dependency: perl(File::Path) for package: git-1.8.3.1-23.el7_8.x86_64
w1-k8s-1.20: --> Processing Dependency: perl(File::Find) for package: git-1.8.3.1-23.el7_8.x86_64
w1-k8s-1.20: --> Processing Dependency: perl(File::Copy) for package: git-1.8.3.1-23.el7_8.x86_64
w1-k8s-1.20: --> Processing Dependency: perl(File::Basename) for package: git-1.8.3.1-23.el7_8.x86_64
w1-k8s-1.20: --> Processing Dependency: perl(Exporter) for package: git-1.8.3.1-23.el7_8.x86_64
w1-k8s-1.20: --> Processing Dependency: perl(Error) for package: git-1.8.3.1-23.el7_8.x86_64
w1-k8s-1.20: --> Processing Dependency: /usr/bin/perl for package: git-1.8.3.1-23.el7_8.x86_64
w1-k8s-1.20: --> Running transaction check
w1-k8s-1.20: ---> Package perl.x86_64 4:5.16.3-299.el7_9 will be installed
w1-k8s-1.20: --> Processing Dependency: perl-libs = 4:5.16.3-299.el7_9 for package: 4:perl-5.16.3-299.el7_9.x86_64
w1-k8s-1.20: --> Processing Dependency: perl(Socket) >= 1.3 for package: 4:perl-5.16.3-299.el7_9.x86_64
w1-k8s-1.20: --> Processing Dependency: perl(Scalar::Util) >= 1.10 for package: 4:perl-5.16.3-299.el7_9.x86_64
w1-k8s-1.20: --> Processing Dependency: perl-macros for package: 4:perl-5.16.3-299.el7_9.x86_64
w1-k8s-1.20: --> Processing Dependency: perl-libs for package: 4:perl-5.16.3-299.el7_9.x86_64
w1-k8s-1.20: --> Processing Dependency: perl(threads::shared) for package: 4:perl-5.16.3-299.el7_9.x86_64
w1-k8s-1.20: --> Processing Dependency: perl(threads) for package: 4:perl-5.16.3-299.el7_9.x86_64
w1-k8s-1.20: --> Processing Dependency: perl(constant) for package: 4:perl-5.16.3-299.el7_9.x86_64
w1-k8s-1.20: --> Processing Dependency: perl(Time::Local) for package: 4:perl-5.16.3-299.el7_9.x86_64
w1-k8s-1.20: --> Processing Dependency: perl(Time::HiRes) for package: 4:perl-5.16.3-299.el7_9.x86_64
w1-k8s-1.20: --> Processing Dependency: perl(Storable) for package: 4:perl-5.16.3-299.el7_9.x86_64
w1-k8s-1.20: --> Processing Dependency: perl(Socket) for package: 4:perl-5.16.3-299.el7_9.x86_64
w1-k8s-1.20: --> Processing Dependency: perl(Scalar::Util) for package: 4:perl-5.16.3-299.el7_9.x86_64
w1-k8s-1.20: --> Processing Dependency: perl(Pod::Simple::XHTML) for package: 4:perl-5.16.3-299.el7_9.x86_64
w1-k8s-1.20: --> Processing Dependency: perl(Pod::Simple::Search) for package: 4:perl-5.16.3-299.el7_9.x86_64
w1-k8s-1.20: --> Processing Dependency: perl(Filter::Util::Call) for package: 4:perl-5.16.3-299.el7_9.x86_64
w1-k8s-1.20: --> Processing Dependency: perl(Carp) for package: 4:perl-5.16.3-299.el7_9.x86_64
w1-k8s-1.20: --> Processing Dependency: libperl.so()(64bit) for package: 4:perl-5.16.3-299.el7_9.x86_64
w1-k8s-1.20: ---> Package perl-Error.noarch 1:0.17020-2.el7 will be installed
w1-k8s-1.20: ---> Package perl-Exporter.noarch 0:5.68-3.el7 will be installed
w1-k8s-1.20: ---> Package perl-File-Path.noarch 0:2.09-2.el7 will be installed
w1-k8s-1.20: ---> Package perl-File-Temp.noarch 0:0.23.01-3.el7 will be installed
w1-k8s-1.20: ---> Package perl-Getopt-Long.noarch 0:2.40-3.el7 will be installed
w1-k8s-1.20: --> Processing Dependency: perl(Pod::Usage) >= 1.14 for package: perl-Getopt-Long-2.40-3.el7.noarch
w1-k8s-1.20: --> Processing Dependency: perl(Text::ParseWords) for package: perl-Getopt-Long-2.40-3.el7.noarch
w1-k8s-1.20: ---> Package perl-Git.noarch 0:1.8.3.1-23.el7_8 will be installed
w1-k8s-1.20: ---> Package perl-PathTools.x86_64 0:3.40-5.el7 will be installed
w1-k8s-1.20: ---> Package perl-TermReadKey.x86_64 0:2.30-20.el7 will be installed
w1-k8s-1.20: ---> Package rsync.x86_64 0:3.1.2-10.el7 will be installed
w1-k8s-1.20: --> Running transaction check
w1-k8s-1.20: ---> Package perl-Carp.noarch 0:1.26-244.el7 will be installed
w1-k8s-1.20: ---> Package perl-Filter.x86_64 0:1.49-3.el7 will be installed
w1-k8s-1.20: ---> Package perl-Pod-Simple.noarch 1:3.28-4.el7 will be installed
w1-k8s-1.20: --> Processing Dependency: perl(Pod::Escapes) >= 1.04 for package: 1:perl-Pod-Simple-3.28-4.el7.noarch
w1-k8s-1.20: --> Processing Dependency: perl(Encode) for package: 1:perl-Pod-Simple-3.28-4.el7.noarch
w1-k8s-1.20: ---> Package perl-Pod-Usage.noarch 0:1.63-3.el7 will be installed
w1-k8s-1.20: --> Processing Dependency: perl(Pod::Text) >= 3.15 for package: perl-Pod-Usage-1.63-3.el7.noarch
w1-k8s-1.20: --> Processing Dependency: perl-Pod-Perldoc for package: perl-Pod-Usage-1.63-3.el7.noarch
w1-k8s-1.20: ---> Package perl-Scalar-List-Utils.x86_64 0:1.27-248.el7 will be installed
w1-k8s-1.20: ---> Package perl-Socket.x86_64 0:2.010-5.el7 will be installed
w1-k8s-1.20: ---> Package perl-Storable.x86_64 0:2.45-3.el7 will be installed
w1-k8s-1.20: ---> Package perl-Text-ParseWords.noarch 0:3.29-4.el7 will be installed
w1-k8s-1.20: ---> Package perl-Time-HiRes.x86_64 4:1.9725-3.el7 will be installed
w1-k8s-1.20: ---> Package perl-Time-Local.noarch 0:1.2300-2.el7 will be installed
w1-k8s-1.20: ---> Package perl-constant.noarch 0:1.27-2.el7 will be installed
w1-k8s-1.20: ---> Package perl-libs.x86_64 4:5.16.3-299.el7_9 will be installed
w1-k8s-1.20: ---> Package perl-macros.x86_64 4:5.16.3-299.el7_9 will be installed
w1-k8s-1.20: ---> Package perl-threads.x86_64 0:1.87-4.el7 will be installed
w1-k8s-1.20: ---> Package perl-threads-shared.x86_64 0:1.43-6.el7 will be installed
w1-k8s-1.20: --> Running transaction check
w1-k8s-1.20: ---> Package perl-Encode.x86_64 0:2.51-7.el7 will be installed
w1-k8s-1.20: ---> Package perl-Pod-Escapes.noarch 1:1.04-299.el7_9 will be installed
w1-k8s-1.20: ---> Package perl-Pod-Perldoc.noarch 0:3.20-4.el7 will be installed
w1-k8s-1.20: --> Processing Dependency: perl(parent) for package: perl-Pod-Perldoc-3.20-4.el7.noarch
w1-k8s-1.20: --> Processing Dependency: perl(HTTP::Tiny) for package: perl-Pod-Perldoc-3.20-4.el7.noarch
w1-k8s-1.20: ---> Package perl-podlators.noarch 0:2.5.1-3.el7 will be installed
w1-k8s-1.20: --> Running transaction check
w1-k8s-1.20: ---> Package perl-HTTP-Tiny.noarch 0:0.033-3.el7 will be installed
w1-k8s-1.20: ---> Package perl-parent.noarch 1:0.225-244.el7 will be installed
w1-k8s-1.20: --> Finished Dependency Resolution
w1-k8s-1.20:
w1-k8s-1.20: Dependencies Resolved
w1-k8s-1.20:
w1-k8s-1.20: ================================================================================
w1-k8s-1.20: Package Arch Version Repository Size
w1-k8s-1.20: ================================================================================
w1-k8s-1.20: Installing:
w1-k8s-1.20: git x86_64 1.8.3.1-23.el7_8 base 4.4 M
w1-k8s-1.20: Installing for dependencies:
w1-k8s-1.20: perl x86_64 4:5.16.3-299.el7_9 updates 8.0 M
w1-k8s-1.20: perl-Carp noarch 1.26-244.el7 base 19 k
w1-k8s-1.20: perl-Encode x86_64 2.51-7.el7 base 1.5 M
w1-k8s-1.20: perl-Error noarch 1:0.17020-2.el7 base 32 k
w1-k8s-1.20: perl-Exporter noarch 5.68-3.el7 base 28 k
w1-k8s-1.20: perl-File-Path noarch 2.09-2.el7 base 26 k
w1-k8s-1.20: perl-File-Temp noarch 0.23.01-3.el7 base 56 k
w1-k8s-1.20: perl-Filter x86_64 1.49-3.el7 base 76 k
w1-k8s-1.20: perl-Getopt-Long noarch 2.40-3.el7 base 56 k
w1-k8s-1.20: perl-Git noarch 1.8.3.1-23.el7_8 base 56 k
w1-k8s-1.20: perl-HTTP-Tiny noarch 0.033-3.el7 base 38 k
w1-k8s-1.20: perl-PathTools x86_64 3.40-5.el7 base 82 k
w1-k8s-1.20: perl-Pod-Escapes noarch 1:1.04-299.el7_9 updates 52 k
w1-k8s-1.20: perl-Pod-Perldoc noarch 3.20-4.el7 base 87 k
w1-k8s-1.20: perl-Pod-Simple noarch 1:3.28-4.el7 base 216 k
w1-k8s-1.20: perl-Pod-Usage noarch 1.63-3.el7 base 27 k
w1-k8s-1.20: perl-Scalar-List-Utils x86_64 1.27-248.el7 base 36 k
w1-k8s-1.20: perl-Socket x86_64 2.010-5.el7 base 49 k
w1-k8s-1.20: perl-Storable x86_64 2.45-3.el7 base 77 k
w1-k8s-1.20: perl-TermReadKey x86_64 2.30-20.el7 base 31 k
w1-k8s-1.20: perl-Text-ParseWords noarch 3.29-4.el7 base 14 k
w1-k8s-1.20: perl-Time-HiRes x86_64 4:1.9725-3.el7 base 45 k
w1-k8s-1.20: perl-Time-Local noarch 1.2300-2.el7 base 24 k
w1-k8s-1.20: perl-constant noarch 1.27-2.el7 base 19 k
w1-k8s-1.20: perl-libs x86_64 4:5.16.3-299.el7_9 updates 690 k
w1-k8s-1.20: perl-macros x86_64 4:5.16.3-299.el7_9 updates 44 k
w1-k8s-1.20: perl-parent noarch 1:0.225-244.el7 base 12 k
w1-k8s-1.20: perl-podlators noarch 2.5.1-3.el7 base 112 k
w1-k8s-1.20: perl-threads x86_64 1.87-4.el7 base 49 k
w1-k8s-1.20: perl-threads-shared x86_64 1.43-6.el7 base 39 k
w1-k8s-1.20: rsync x86_64 3.1.2-10.el7 base 404 k
w1-k8s-1.20:
w1-k8s-1.20: Transaction Summary
w1-k8s-1.20: ================================================================================
w1-k8s-1.20: Install 1 Package (+31 Dependent packages)
w1-k8s-1.20: Total download size: 16 M
w1-k8s-1.20: Installed size: 59 M
w1-k8s-1.20: Downloading packages:
w1-k8s-1.20: --------------------------------------------------------------------------------
w1-k8s-1.20: Total 7.8 MB/s | 16 MB 00:02
w1-k8s-1.20: Running transaction check
w1-k8s-1.20: Running transaction test
w1-k8s-1.20: Transaction test succeeded
w1-k8s-1.20: Running transaction
w1-k8s-1.20: Installing : 1:perl-parent-0.225-244.el7.noarch 1/32
w1-k8s-1.20:
w1-k8s-1.20: Installing : perl-HTTP-Tiny-0.033-3.el7.noarch 2/32
w1-k8s-1.20:
w1-k8s-1.20: Installing : perl-podlators-2.5.1-3.el7.noarch 3/32
w1-k8s-1.20:
w1-k8s-1.20: Installing : perl-Pod-Perldoc-3.20-4.el7.noarch 4/32
w1-k8s-1.20:
w1-k8s-1.20: Installing : 1:perl-Pod-Escapes-1.04-299.el7_9.noarch 5/32
w1-k8s-1.20:
w1-k8s-1.20: Installing : perl-Encode-2.51-7.el7.x86_64 6/32
w1-k8s-1.20:
w1-k8s-1.20: Installing : perl-Text-ParseWords-3.29-4.el7.noarch 7/32
w1-k8s-1.20:
w1-k8s-1.20: Installing : perl-Pod-Usage-1.63-3.el7.noarch 8/32
w1-k8s-1.20:
w1-k8s-1.20: Installing : 4:perl-macros-5.16.3-299.el7_9.x86_64 9/32
w1-k8s-1.20:
w1-k8s-1.20: Installing : perl-Storable-2.45-3.el7.x86_64 10/32
w1-k8s-1.20:
w1-k8s-1.20: Installing : perl-Exporter-5.68-3.el7.noarch 11/32
w1-k8s-1.20:
w1-k8s-1.20: Installing : perl-constant-1.27-2.el7.noarch 12/32
w1-k8s-1.20:
w1-k8s-1.20: Installing : perl-Socket-2.010-5.el7.x86_64 13/32
w1-k8s-1.20:
w1-k8s-1.20: Installing : perl-Time-Local-1.2300-2.el7.noarch 14/32
w1-k8s-1.20:
w1-k8s-1.20: Installing : perl-Carp-1.26-244.el7.noarch 15/32
w1-k8s-1.20:
w1-k8s-1.20: Installing : 4:perl-Time-HiRes-1.9725-3.el7.x86_64 16/32
w1-k8s-1.20:
w1-k8s-1.20: Installing : perl-PathTools-3.40-5.el7.x86_64 17/32
w1-k8s-1.20:
w1-k8s-1.20: Installing : perl-Scalar-List-Utils-1.27-248.el7.x86_64 18/32
w1-k8s-1.20:
w1-k8s-1.20: Installing : 1:perl-Pod-Simple-3.28-4.el7.noarch 19/32
w1-k8s-1.20:
w1-k8s-1.20: Installing : perl-File-Temp-0.23.01-3.el7.noarch 20/32
w1-k8s-1.20:
w1-k8s-1.20: Installing : perl-File-Path-2.09-2.el7.noarch 21/32
w1-k8s-1.20:
w1-k8s-1.20: Installing : perl-threads-shared-1.43-6.el7.x86_64 22/32
w1-k8s-1.20:
w1-k8s-1.20: Installing : perl-threads-1.87-4.el7.x86_64 23/32
w1-k8s-1.20:
w1-k8s-1.20: Installing : perl-Filter-1.49-3.el7.x86_64 24/32
w1-k8s-1.20:
w1-k8s-1.20: Installing : 4:perl-libs-5.16.3-299.el7_9.x86_64 25/32
w1-k8s-1.20:
w1-k8s-1.20: Installing : perl-Getopt-Long-2.40-3.el7.noarch 26/32
w1-k8s-1.20:
w1-k8s-1.20: Installing : 4:perl-5.16.3-299.el7_9.x86_64 27/32
w1-k8s-1.20:
w1-k8s-1.20: Installing : 1:perl-Error-0.17020-2.el7.noarch 28/32
w1-k8s-1.20:
w1-k8s-1.20: Installing : perl-TermReadKey-2.30-20.el7.x86_64 29/32
w1-k8s-1.20:
w1-k8s-1.20: Installing : rsync-3.1.2-10.el7.x86_64 30/32
w1-k8s-1.20:
w1-k8s-1.20: Installing : perl-Git-1.8.3.1-23.el7_8.noarch 31/32
w1-k8s-1.20:
w1-k8s-1.20: Installing : git-1.8.3.1-23.el7_8.x86_64 32/32
w1-k8s-1.20:
w1-k8s-1.20: Verifying : perl-HTTP-Tiny-0.033-3.el7.noarch 1/32
w1-k8s-1.20:
w1-k8s-1.20: Verifying : perl-threads-shared-1.43-6.el7.x86_64 2/32
w1-k8s-1.20:
w1-k8s-1.20: Verifying : perl-Storable-2.45-3.el7.x86_64 3/32
w1-k8s-1.20:
w1-k8s-1.20: Verifying : perl-Exporter-5.68-3.el7.noarch 4/32
w1-k8s-1.20:
w1-k8s-1.20: Verifying : perl-constant-1.27-2.el7.noarch 5/32
w1-k8s-1.20:
w1-k8s-1.20: Verifying : perl-PathTools-3.40-5.el7.x86_64 6/32
w1-k8s-1.20:
w1-k8s-1.20: Verifying : perl-Socket-2.010-5.el7.x86_64 7/32
w1-k8s-1.20:
w1-k8s-1.20: Verifying : git-1.8.3.1-23.el7_8.x86_64 8/32
w1-k8s-1.20:
w1-k8s-1.20: Verifying : 1:perl-parent-0.225-244.el7.noarch 9/32
w1-k8s-1.20:
w1-k8s-1.20: Verifying : 4:perl-macros-5.16.3-299.el7_9.x86_64 10/32
w1-k8s-1.20:
w1-k8s-1.20: Verifying : perl-TermReadKey-2.30-20.el7.x86_64 11/32
w1-k8s-1.20:
w1-k8s-1.20: Verifying : perl-File-Temp-0.23.01-3.el7.noarch 12/32
w1-k8s-1.20:
w1-k8s-1.20: Verifying : 1:perl-Pod-Simple-3.28-4.el7.noarch 13/32
w1-k8s-1.20:
w1-k8s-1.20: Verifying : perl-Time-Local-1.2300-2.el7.noarch 14/32
w1-k8s-1.20:
w1-k8s-1.20: Verifying : 1:perl-Pod-Escapes-1.04-299.el7_9.noarch 15/32
w1-k8s-1.20:
w1-k8s-1.20: Verifying : perl-Git-1.8.3.1-23.el7_8.noarch 16/32
w1-k8s-1.20:
w1-k8s-1.20: Verifying : perl-Carp-1.26-244.el7.noarch 17/32
w1-k8s-1.20:
w1-k8s-1.20: Verifying : 1:perl-Error-0.17020-2.el7.noarch 18/32
w1-k8s-1.20:
w1-k8s-1.20: Verifying : 4:perl-Time-HiRes-1.9725-3.el7.x86_64 19/32
w1-k8s-1.20:
w1-k8s-1.20: Verifying : perl-Scalar-List-Utils-1.27-248.el7.x86_64 20/32
w1-k8s-1.20:
w1-k8s-1.20: Verifying : perl-Pod-Usage-1.63-3.el7.noarch 21/32
w1-k8s-1.20:
w1-k8s-1.20: Verifying : perl-Encode-2.51-7.el7.x86_64 22/32
w1-k8s-1.20:
w1-k8s-1.20: Verifying : perl-Pod-Perldoc-3.20-4.el7.noarch 23/32
w1-k8s-1.20:
w1-k8s-1.20: Verifying : perl-podlators-2.5.1-3.el7.noarch 24/32
w1-k8s-1.20:
w1-k8s-1.20: Verifying : 4:perl-5.16.3-299.el7_9.x86_64 25/32
w1-k8s-1.20:
w1-k8s-1.20: Verifying : perl-File-Path-2.09-2.el7.noarch 26/32
w1-k8s-1.20:
w1-k8s-1.20: Verifying : perl-threads-1.87-4.el7.x86_64 27/32
w1-k8s-1.20:
w1-k8s-1.20: Verifying : rsync-3.1.2-10.el7.x86_64 28/32
w1-k8s-1.20:
w1-k8s-1.20: Verifying : perl-Filter-1.49-3.el7.x86_64 29/32
w1-k8s-1.20:
w1-k8s-1.20: Verifying : perl-Getopt-Long-2.40-3.el7.noarch 30/32
w1-k8s-1.20:
w1-k8s-1.20: Verifying : perl-Text-ParseWords-3.29-4.el7.noarch 31/32
w1-k8s-1.20:
w1-k8s-1.20: Verifying : 4:perl-libs-5.16.3-299.el7_9.x86_64 32/32
w1-k8s-1.20:
w1-k8s-1.20:
w1-k8s-1.20: Installed:
w1-k8s-1.20: git.x86_64 0:1.8.3.1-23.el7_8
w1-k8s-1.20:
w1-k8s-1.20: Dependency Installed:
w1-k8s-1.20: perl.x86_64 4:5.16.3-299.el7_9
w1-k8s-1.20: perl-Carp.noarch 0:1.26-244.el7
w1-k8s-1.20: perl-Encode.x86_64 0:2.51-7.el7
w1-k8s-1.20: perl-Error.noarch 1:0.17020-2.el7
w1-k8s-1.20: perl-Exporter.noarch 0:5.68-3.el7
w1-k8s-1.20: perl-File-Path.noarch 0:2.09-2.el7
w1-k8s-1.20: perl-File-Temp.noarch 0:0.23.01-3.el7
w1-k8s-1.20: perl-Filter.x86_64 0:1.49-3.el7
w1-k8s-1.20: perl-Getopt-Long.noarch 0:2.40-3.el7
w1-k8s-1.20: perl-Git.noarch 0:1.8.3.1-23.el7_8
w1-k8s-1.20: perl-HTTP-Tiny.noarch 0:0.033-3.el7
w1-k8s-1.20: perl-PathTools.x86_64 0:3.40-5.el7
w1-k8s-1.20: perl-Pod-Escapes.noarch 1:1.04-299.el7_9
w1-k8s-1.20: perl-Pod-Perldoc.noarch 0:3.20-4.el7
w1-k8s-1.20: perl-Pod-Simple.noarch 1:3.28-4.el7
w1-k8s-1.20: perl-Pod-Usage.noarch 0:1.63-3.el7
w1-k8s-1.20: perl-Scalar-List-Utils.x86_64 0:1.27-248.el7
w1-k8s-1.20: perl-Socket.x86_64 0:2.010-5.el7
w1-k8s-1.20: perl-Storable.x86_64 0:2.45-3.el7
w1-k8s-1.20: perl-TermReadKey.x86_64 0:2.30-20.el7
w1-k8s-1.20: perl-Text-ParseWords.noarch 0:3.29-4.el7
w1-k8s-1.20: perl-Time-HiRes.x86_64 4:1.9725-3.el7
w1-k8s-1.20: perl-Time-Local.noarch 0:1.2300-2.el7
w1-k8s-1.20: perl-constant.noarch 0:1.27-2.el7
w1-k8s-1.20: perl-libs.x86_64 4:5.16.3-299.el7_9
w1-k8s-1.20: perl-macros.x86_64 4:5.16.3-299.el7_9
w1-k8s-1.20: perl-parent.noarch 1:0.225-244.el7
w1-k8s-1.20: perl-podlators.noarch 0:2.5.1-3.el7
w1-k8s-1.20: perl-threads.x86_64 0:1.87-4.el7
w1-k8s-1.20: perl-threads-shared.x86_64 0:1.43-6.el7
w1-k8s-1.20: rsync.x86_64 0:3.1.2-10.el7
w1-k8s-1.20: Complete!
w1-k8s-1.20: Loaded plugins: fastestmirror
w1-k8s-1.20: Loading mirror speeds from cached hostfile
w1-k8s-1.20: * base: mirror.navercorp.com
w1-k8s-1.20: * epel: ftp.iij.ad.jp
w1-k8s-1.20: * extras: mirror.navercorp.com
w1-k8s-1.20: * updates: mirror.navercorp.com
w1-k8s-1.20: Resolving Dependencies
w1-k8s-1.20: --> Running transaction check
w1-k8s-1.20: ---> Package containerd.io.x86_64 0:1.3.9-3.1.el7 will be installed
w1-k8s-1.20: --> Processing Dependency: container-selinux >= 2:2.74 for package: containerd.io-1.3.9-3.1.el7.x86_64
w1-k8s-1.20: ---> Package docker-ce.x86_64 3:19.03.14-3.el7 will be installed
w1-k8s-1.20: --> Processing Dependency: libcgroup for package: 3:docker-ce-19.03.14-3.el7.x86_64
w1-k8s-1.20: ---> Package docker-ce-cli.x86_64 1:19.03.14-3.el7 will be installed
w1-k8s-1.20: --> Running transaction check
w1-k8s-1.20: ---> Package container-selinux.noarch 2:2.119.2-1.911c772.el7_8 will be installed
w1-k8s-1.20: --> Processing Dependency: policycoreutils-python for package: 2:container-selinux-2.119.2-1.911c772.el7_8.noarch
w1-k8s-1.20: ---> Package libcgroup.x86_64 0:0.41-21.el7 will be installed
w1-k8s-1.20: --> Running transaction check
w1-k8s-1.20: ---> Package policycoreutils-python.x86_64 0:2.5-34.el7 will be installed
w1-k8s-1.20: --> Processing Dependency: setools-libs >= 3.3.8-4 for package: policycoreutils-python-2.5-34.el7.x86_64
w1-k8s-1.20: --> Processing Dependency: libsemanage-python >= 2.5-14 for package: policycoreutils-python-2.5-34.el7.x86_64
w1-k8s-1.20: --> Processing Dependency: audit-libs-python >= 2.1.3-4 for package: policycoreutils-python-2.5-34.el7.x86_64
w1-k8s-1.20: --> Processing Dependency: python-IPy for package: policycoreutils-python-2.5-34.el7.x86_64
w1-k8s-1.20: --> Processing Dependency: libqpol.so.1(VERS_1.4)(64bit) for package: policycoreutils-python-2.5-34.el7.x86_64
w1-k8s-1.20: --> Processing Dependency: libqpol.so.1(VERS_1.2)(64bit) for package: policycoreutils-python-2.5-34.el7.x86_64
w1-k8s-1.20: --> Processing Dependency: libapol.so.4(VERS_4.0)(64bit) for package: policycoreutils-python-2.5-34.el7.x86_64
w1-k8s-1.20: --> Processing Dependency: checkpolicy for package: policycoreutils-python-2.5-34.el7.x86_64
w1-k8s-1.20: --> Processing Dependency: libqpol.so.1()(64bit) for package: policycoreutils-python-2.5-34.el7.x86_64
w1-k8s-1.20: --> Processing Dependency: libapol.so.4()(64bit) for package: policycoreutils-python-2.5-34.el7.x86_64
w1-k8s-1.20: --> Running transaction check
w1-k8s-1.20: ---> Package audit-libs-python.x86_64 0:2.8.5-4.el7 will be installed
w1-k8s-1.20: ---> Package checkpolicy.x86_64 0:2.5-8.el7 will be installed
w1-k8s-1.20: ---> Package libsemanage-python.x86_64 0:2.5-14.el7 will be installed
w1-k8s-1.20: ---> Package python-IPy.noarch 0:0.75-6.el7 will be installed
w1-k8s-1.20: ---> Package setools-libs.x86_64 0:3.3.8-4.el7 will be installed
w1-k8s-1.20: --> Finished Dependency Resolution
w1-k8s-1.20:
w1-k8s-1.20: Dependencies Resolved
w1-k8s-1.20:
w1-k8s-1.20: ================================================================================
w1-k8s-1.20: Package Arch Version Repository Size
w1-k8s-1.20: ================================================================================
w1-k8s-1.20: Installing:
w1-k8s-1.20: containerd.io x86_64 1.3.9-3.1.el7 docker-ce-stable 29 M
w1-k8s-1.20: docker-ce x86_64 3:19.03.14-3.el7 docker-ce-stable 24 M
w1-k8s-1.20: docker-ce-cli x86_64 1:19.03.14-3.el7 docker-ce-stable 38 M
w1-k8s-1.20: Installing for dependencies:
w1-k8s-1.20: audit-libs-python x86_64 2.8.5-4.el7 base 76 k
w1-k8s-1.20: checkpolicy x86_64 2.5-8.el7 base 295 k
w1-k8s-1.20: container-selinux noarch 2:2.119.2-1.911c772.el7_8 extras 40 k
w1-k8s-1.20: libcgroup x86_64 0.41-21.el7 base 66 k
w1-k8s-1.20: libsemanage-python x86_64 2.5-14.el7 base 113 k
w1-k8s-1.20: policycoreutils-python x86_64 2.5-34.el7 base 457 k
w1-k8s-1.20: python-IPy noarch 0.75-6.el7 base 32 k
w1-k8s-1.20: setools-libs x86_64 3.3.8-4.el7 base 620 k
w1-k8s-1.20:
w1-k8s-1.20: Transaction Summary
w1-k8s-1.20: ================================================================================
w1-k8s-1.20: Install 3 Packages (+8 Dependent packages)
w1-k8s-1.20: Total download size: 93 M
w1-k8s-1.20: Installed size: 393 M
w1-k8s-1.20: Downloading packages:
w1-k8s-1.20: warning:
w1-k8s-1.20: /var/cache/yum/x86_64/7/docker-ce-stable/packages/docker-ce-19.03.14-3.el7.x86_64.rpm: Header V4 RSA/SHA512 Signature, key ID 621e9f35: NOKEY
w1-k8s-1.20: Public key for docker-ce-19.03.14-3.el7.x86_64.rpm is not installed
w1-k8s-1.20: --------------------------------------------------------------------------------
w1-k8s-1.20: Total 10 MB/s | 93 MB 00:09
w1-k8s-1.20: Retrieving key from https://download.docker.com/linux/centos/gpg
w1-k8s-1.20: Importing GPG key 0x621E9F35:
w1-k8s-1.20: Userid : "Docker Release (CE rpm) <docker@docker.com>"
w1-k8s-1.20: Fingerprint: 060a 61c5 1b55 8a7f 742b 77aa c52f eb6b 621e 9f35
w1-k8s-1.20: From : https://download.docker.com/linux/centos/gpg
w1-k8s-1.20: Running transaction check
w1-k8s-1.20: Running transaction test
w1-k8s-1.20: Transaction test succeeded
w1-k8s-1.20: Running transaction
w1-k8s-1.20: Installing : libcgroup-0.41-21.el7.x86_64 1/11
w1-k8s-1.20:
w1-k8s-1.20: Installing : setools-libs-3.3.8-4.el7.x86_64 2/11
w1-k8s-1.20:
w1-k8s-1.20: Installing : 1:docker-ce-cli-19.03.14-3.el7.x86_64 3/11
w1-k8s-1.20:
w1-k8s-1.20: Installing : audit-libs-python-2.8.5-4.el7.x86_64 4/11
w1-k8s-1.20:
w1-k8s-1.20: Installing : python-IPy-0.75-6.el7.noarch 5/11
w1-k8s-1.20:
w1-k8s-1.20: Installing : libsemanage-python-2.5-14.el7.x86_64 6/11
w1-k8s-1.20:
w1-k8s-1.20: Installing : checkpolicy-2.5-8.el7.x86_64 7/11
w1-k8s-1.20:
w1-k8s-1.20: Installing : policycoreutils-python-2.5-34.el7.x86_64 8/11
w1-k8s-1.20:
w1-k8s-1.20: Installing : 2:container-selinux-2.119.2-1.911c772.el7_8.noarch 9/11
w1-k8s-1.20:
w1-k8s-1.20: Installing : containerd.io-1.3.9-3.1.el7.x86_64 10/11
w1-k8s-1.20:
w1-k8s-1.20: Installing : 3:docker-ce-19.03.14-3.el7.x86_64 11/11
w1-k8s-1.20:
w1-k8s-1.20: Verifying : checkpolicy-2.5-8.el7.x86_64 1/11
w1-k8s-1.20:
w1-k8s-1.20: Verifying : 3:docker-ce-19.03.14-3.el7.x86_64 2/11
w1-k8s-1.20:
w1-k8s-1.20: Verifying : containerd.io-1.3.9-3.1.el7.x86_64 3/11
w1-k8s-1.20:
w1-k8s-1.20: Verifying : libsemanage-python-2.5-14.el7.x86_64 4/11
w1-k8s-1.20:
w1-k8s-1.20: Verifying : 2:container-selinux-2.119.2-1.911c772.el7_8.noarch 5/11
w1-k8s-1.20:
w1-k8s-1.20: Verifying : python-IPy-0.75-6.el7.noarch 6/11
w1-k8s-1.20:
w1-k8s-1.20: Verifying : policycoreutils-python-2.5-34.el7.x86_64 7/11
w1-k8s-1.20:
w1-k8s-1.20: Verifying : audit-libs-python-2.8.5-4.el7.x86_64 8/11
w1-k8s-1.20:
w1-k8s-1.20: Verifying : 1:docker-ce-cli-19.03.14-3.el7.x86_64 9/11
w1-k8s-1.20:
w1-k8s-1.20: Verifying : setools-libs-3.3.8-4.el7.x86_64 10/11
w1-k8s-1.20:
w1-k8s-1.20: Verifying : libcgroup-0.41-21.el7.x86_64 11/11
w1-k8s-1.20:
w1-k8s-1.20:
w1-k8s-1.20: Installed:
w1-k8s-1.20: containerd.io.x86_64 0:1.3.9-3.1.el7 docker-ce.x86_64 3:19.03.14-3.el7
w1-k8s-1.20: docker-ce-cli.x86_64 1:19.03.14-3.el7
w1-k8s-1.20:
w1-k8s-1.20: Dependency Installed:
w1-k8s-1.20: audit-libs-python.x86_64 0:2.8.5-4.el7
w1-k8s-1.20: checkpolicy.x86_64 0:2.5-8.el7
w1-k8s-1.20: container-selinux.noarch 2:2.119.2-1.911c772.el7_8
w1-k8s-1.20: libcgroup.x86_64 0:0.41-21.el7
w1-k8s-1.20: libsemanage-python.x86_64 0:2.5-14.el7
w1-k8s-1.20: policycoreutils-python.x86_64 0:2.5-34.el7
w1-k8s-1.20: python-IPy.noarch 0:0.75-6.el7
w1-k8s-1.20: setools-libs.x86_64 0:3.3.8-4.el7
w1-k8s-1.20: Complete!
w1-k8s-1.20: Loaded plugins: fastestmirror
w1-k8s-1.20: Loading mirror speeds from cached hostfile
w1-k8s-1.20: * base: mirror.navercorp.com
w1-k8s-1.20: * epel: ftp.iij.ad.jp
w1-k8s-1.20: * extras: mirror.navercorp.com
w1-k8s-1.20: * updates: mirror.navercorp.com
w1-k8s-1.20: Resolving Dependencies
w1-k8s-1.20: --> Running transaction check
w1-k8s-1.20: ---> Package kubeadm.x86_64 0:1.20.2-0 will be installed
w1-k8s-1.20: --> Processing Dependency: kubernetes-cni >= 0.8.6 for package: kubeadm-1.20.2-0.x86_64
w1-k8s-1.20: --> Processing Dependency: cri-tools >= 1.13.0 for package: kubeadm-1.20.2-0.x86_64
w1-k8s-1.20: ---> Package kubectl.x86_64 0:1.20.2-0 will be installed
w1-k8s-1.20: ---> Package kubelet.x86_64 0:1.20.2-0 will be installed
w1-k8s-1.20: --> Processing Dependency: socat for package: kubelet-1.20.2-0.x86_64
w1-k8s-1.20: --> Processing Dependency: conntrack for package: kubelet-1.20.2-0.x86_64
w1-k8s-1.20: --> Running transaction check
w1-k8s-1.20: ---> Package conntrack-tools.x86_64 0:1.4.4-7.el7 will be installed
w1-k8s-1.20: --> Processing Dependency: libnetfilter_cttimeout.so.1(LIBNETFILTER_CTTIMEOUT_1.1)(64bit) for package: conntrack-tools-1.4.4-7.el7.x86_64
w1-k8s-1.20: --> Processing Dependency: libnetfilter_cttimeout.so.1(LIBNETFILTER_CTTIMEOUT_1.0)(64bit) for package: conntrack-tools-1.4.4-7.el7.x86_64
w1-k8s-1.20: --> Processing Dependency: libnetfilter_cthelper.so.0(LIBNETFILTER_CTHELPER_1.0)(64bit) for package: conntrack-tools-1.4.4-7.el7.x86_64
w1-k8s-1.20: --> Processing Dependency: libnetfilter_queue.so.1()(64bit) for package: conntrack-tools-1.4.4-7.el7.x86_64
w1-k8s-1.20: --> Processing Dependency: libnetfilter_cttimeout.so.1()(64bit) for package: conntrack-tools-1.4.4-7.el7.x86_64
w1-k8s-1.20: --> Processing Dependency: libnetfilter_cthelper.so.0()(64bit) for package: conntrack-tools-1.4.4-7.el7.x86_64
w1-k8s-1.20: ---> Package cri-tools.x86_64 0:1.13.0-0 will be installed
w1-k8s-1.20: ---> Package kubernetes-cni.x86_64 0:0.8.7-0 will be installed
w1-k8s-1.20: ---> Package socat.x86_64 0:1.7.3.2-2.el7 will be installed
w1-k8s-1.20: --> Running transaction check
w1-k8s-1.20: ---> Package libnetfilter_cthelper.x86_64 0:1.0.0-11.el7 will be installed
w1-k8s-1.20: ---> Package libnetfilter_cttimeout.x86_64 0:1.0.0-7.el7 will be installed
w1-k8s-1.20: ---> Package libnetfilter_queue.x86_64 0:1.0.2-2.el7_2 will be installed
w1-k8s-1.20: --> Finished Dependency Resolution
w1-k8s-1.20:
w1-k8s-1.20: Dependencies Resolved
w1-k8s-1.20:
w1-k8s-1.20: ================================================================================
w1-k8s-1.20: Package Arch Version Repository Size
w1-k8s-1.20: ================================================================================
w1-k8s-1.20: Installing:
w1-k8s-1.20: kubeadm x86_64 1.20.2-0 kubernetes 8.3 M
w1-k8s-1.20: kubectl x86_64 1.20.2-0 kubernetes 8.5 M
w1-k8s-1.20: kubelet x86_64 1.20.2-0 kubernetes 20 M
w1-k8s-1.20: Installing for dependencies:
w1-k8s-1.20: conntrack-tools x86_64 1.4.4-7.el7 base 187 k
w1-k8s-1.20: cri-tools x86_64 1.13.0-0 kubernetes 5.1 M
w1-k8s-1.20: kubernetes-cni x86_64 0.8.7-0 kubernetes 19 M
w1-k8s-1.20: libnetfilter_cthelper x86_64 1.0.0-11.el7 base 18 k
w1-k8s-1.20: libnetfilter_cttimeout x86_64 1.0.0-7.el7 base 18 k
w1-k8s-1.20: libnetfilter_queue x86_64 1.0.2-2.el7_2 base 23 k
w1-k8s-1.20: socat x86_64 1.7.3.2-2.el7 base 290 k
w1-k8s-1.20:
w1-k8s-1.20: Transaction Summary
w1-k8s-1.20: ================================================================================
w1-k8s-1.20: Install 3 Packages (+7 Dependent packages)
w1-k8s-1.20: Total download size: 61 M
w1-k8s-1.20: Installed size: 262 M
w1-k8s-1.20: Downloading packages:
w1-k8s-1.20: warning:
w1-k8s-1.20: /var/cache/yum/x86_64/7/kubernetes/packages/14bfe6e75a9efc8eca3f638eb22c7e2ce759c67f95b43b16fae4ebabde1549f3-cri-tools-1.13.0-0.x86_64.rpm: Header V4 RSA/SHA512 Signature, key ID 3e1ba8d5: NOKEY
w1-k8s-1.20: Public key for 14bfe6e75a9efc8eca3f638eb22c7e2ce759c67f95b43b16fae4ebabde1549f3-cri-tools-1.13.0-0.x86_64.rpm is not installed
w1-k8s-1.20: --------------------------------------------------------------------------------
w1-k8s-1.20: Total 8.0 MB/s | 61 MB 00:07
w1-k8s-1.20: Retrieving key from https://packages.cloud.google.com/yum/doc/yum-key.gpg
w1-k8s-1.20: Importing GPG key 0xA7317B0F:
w1-k8s-1.20: Userid : "Google Cloud Packages Automatic Signing Key <gc-team@google.com>"
w1-k8s-1.20: Fingerprint: d0bc 747f d8ca f711 7500 d6fa 3746 c208 a731 7b0f
w1-k8s-1.20: From : https://packages.cloud.google.com/yum/doc/yum-key.gpg
w1-k8s-1.20: Importing GPG key 0xBA07F4FB:
w1-k8s-1.20: Userid : "Google Cloud Packages Automatic Signing Key <gc-team@google.com>"
w1-k8s-1.20: Fingerprint: 54a6 47f9 048d 5688 d7da 2abe 6a03 0b21 ba07 f4fb
w1-k8s-1.20: From : https://packages.cloud.google.com/yum/doc/yum-key.gpg
w1-k8s-1.20: Retrieving key from https://packages.cloud.google.com/yum/doc/rpm-package-key.gpg
w1-k8s-1.20: Importing GPG key 0x3E1BA8D5:
w1-k8s-1.20: Userid : "Google Cloud Packages RPM Signing Key <gc-team@google.com>"
w1-k8s-1.20: Fingerprint: 3749 e1ba 95a8 6ce0 5454 6ed2 f09c 394c 3e1b a8d5
w1-k8s-1.20: From : https://packages.cloud.google.com/yum/doc/rpm-package-key.gpg
w1-k8s-1.20: Running transaction check
w1-k8s-1.20: Running transaction test
w1-k8s-1.20: Transaction test succeeded
w1-k8s-1.20: Running transaction
w1-k8s-1.20: Installing : libnetfilter_cthelper-1.0.0-11.el7.x86_64 1/10
w1-k8s-1.20:
w1-k8s-1.20: Installing : socat-1.7.3.2-2.el7.x86_64 2/10
w1-k8s-1.20:
w1-k8s-1.20: Installing : libnetfilter_cttimeout-1.0.0-7.el7.x86_64 3/10
w1-k8s-1.20:
w1-k8s-1.20: Installing : kubectl-1.20.2-0.x86_64 4/10
w1-k8s-1.20:
w1-k8s-1.20: Installing : libnetfilter_queue-1.0.2-2.el7_2.x86_64 5/10
w1-k8s-1.20:
w1-k8s-1.20: Installing : conntrack-tools-1.4.4-7.el7.x86_64 6/10
w1-k8s-1.20:
w1-k8s-1.20: Installing : kubernetes-cni-0.8.7-0.x86_64 7/10
w1-k8s-1.20:
w1-k8s-1.20: Installing : kubelet-1.20.2-0.x86_64 8/10
w1-k8s-1.20:
w1-k8s-1.20: Installing : cri-tools-1.13.0-0.x86_64 9/10
w1-k8s-1.20:
w1-k8s-1.20: Installing : kubeadm-1.20.2-0.x86_64 10/10
w1-k8s-1.20:
w1-k8s-1.20: Verifying : conntrack-tools-1.4.4-7.el7.x86_64 1/10
w1-k8s-1.20:
w1-k8s-1.20: Verifying : kubernetes-cni-0.8.7-0.x86_64 2/10
w1-k8s-1.20:
w1-k8s-1.20: Verifying : kubelet-1.20.2-0.x86_64 3/10
w1-k8s-1.20:
w1-k8s-1.20: Verifying : kubeadm-1.20.2-0.x86_64 4/10
w1-k8s-1.20:
w1-k8s-1.20: Verifying : cri-tools-1.13.0-0.x86_64 5/10
w1-k8s-1.20:
w1-k8s-1.20: Verifying : libnetfilter_queue-1.0.2-2.el7_2.x86_64 6/10
w1-k8s-1.20:
w1-k8s-1.20: Verifying : kubectl-1.20.2-0.x86_64 7/10
w1-k8s-1.20:
w1-k8s-1.20: Verifying : libnetfilter_cttimeout-1.0.0-7.el7.x86_64 8/10
w1-k8s-1.20:
w1-k8s-1.20: Verifying : socat-1.7.3.2-2.el7.x86_64 9/10
w1-k8s-1.20:
w1-k8s-1.20: Verifying : libnetfilter_cthelper-1.0.0-11.el7.x86_64 10/10
w1-k8s-1.20:
w1-k8s-1.20:
w1-k8s-1.20: Installed:
w1-k8s-1.20: kubeadm.x86_64 0:1.20.2-0 kubectl.x86_64 0:1.20.2-0 kubelet.x86_64 0:1.20.2-0
w1-k8s-1.20:
w1-k8s-1.20: Dependency Installed:
w1-k8s-1.20: conntrack-tools.x86_64 0:1.4.4-7.el7
w1-k8s-1.20: cri-tools.x86_64 0:1.13.0-0
w1-k8s-1.20: kubernetes-cni.x86_64 0:0.8.7-0
w1-k8s-1.20: libnetfilter_cthelper.x86_64 0:1.0.0-11.el7
w1-k8s-1.20: libnetfilter_cttimeout.x86_64 0:1.0.0-7.el7
w1-k8s-1.20: libnetfilter_queue.x86_64 0:1.0.2-2.el7_2
w1-k8s-1.20: socat.x86_64 0:1.7.3.2-2.el7
w1-k8s-1.20: Complete!
w1-k8s-1.20: Created symlink from /etc/systemd/system/multi-user.target.wants/docker.service to /usr/lib/systemd/system/docker.service.
w1-k8s-1.20: Created symlink from /etc/systemd/system/multi-user.target.wants/kubelet.service to /usr/lib/systemd/system/kubelet.service.
==> w1-k8s-1.20: Running provisioner: shell...
w1-k8s-1.20: Running: /tmp/vagrant-shell20210329-63160-14lqzy4.sh
w1-k8s-1.20: [preflight] Running pre-flight checks
w1-k8s-1.20: [WARNING IsDockerSystemdCheck]: detected "cgroupfs" as the Docker cgroup driver. The recommended driver is "systemd". Please follow the guide at https://kubernetes.io/docs/setup/cri/
w1-k8s-1.20: [preflight] Reading configuration from the cluster...
w1-k8s-1.20: [preflight] FYI: You can look at this config file with 'kubectl -n kube-system get cm kubeadm-config -o yaml'
w1-k8s-1.20: [kubelet-start] Writing kubelet configuration to file "/var/lib/kubelet/config.yaml"
w1-k8s-1.20: [kubelet-start] Writing kubelet environment file with flags to file "/var/lib/kubelet/kubeadm-flags.env"
w1-k8s-1.20: [kubelet-start] Starting the kubelet
w1-k8s-1.20: [kubelet-start] Waiting for the kubelet to perform the TLS Bootstrap...
w1-k8s-1.20:
w1-k8s-1.20: This node has joined the cluster:
w1-k8s-1.20: * Certificate signing request was sent to apiserver and a response was received.
w1-k8s-1.20: * The Kubelet was informed of the new secure connection details.
w1-k8s-1.20:
w1-k8s-1.20: Run 'kubectl get nodes' on the control-plane to see this node join the cluster.
==> w2-k8s-1.20: Importing base box 'sysnet4admin/CentOS-k8s'...
==> w2-k8s-1.20: Matching MAC address for NAT networking...
==> w2-k8s-1.20: Checking if box 'sysnet4admin/CentOS-k8s' version '0.7.4' is up to date...
==> w2-k8s-1.20: Setting the name of the VM: w2-k8s-1.20(github_SysNet4Admin)
==> w2-k8s-1.20: Clearing any previously set network interfaces...
==> w2-k8s-1.20: Preparing network interfaces based on configuration...
w2-k8s-1.20: Adapter 1: nat
w2-k8s-1.20: Adapter 2: hostonly
==> w2-k8s-1.20: Forwarding ports...
w2-k8s-1.20: 22 (guest) => 60102 (host) (adapter 1)
==> w2-k8s-1.20: Running 'pre-boot' VM customizations...
==> w2-k8s-1.20: Booting VM...
==> w2-k8s-1.20: Waiting for machine to boot. This may take a few minutes...
w2-k8s-1.20: SSH address: 127.0.0.1:60102
w2-k8s-1.20: SSH username: vagrant
w2-k8s-1.20: SSH auth method: private key
w2-k8s-1.20:
w2-k8s-1.20: Vagrant insecure key detected. Vagrant will automatically replace
w2-k8s-1.20: this with a newly generated keypair for better security.
w2-k8s-1.20:
w2-k8s-1.20: Inserting generated public key within guest...
w2-k8s-1.20: Removing insecure key from the guest if it's present...
w2-k8s-1.20: Key inserted! Disconnecting and reconnecting using new SSH key...
==> w2-k8s-1.20: Machine booted and ready!
==> w2-k8s-1.20: Checking for guest additions in VM...
w2-k8s-1.20: The guest additions on this VM do not match the installed version of
w2-k8s-1.20: VirtualBox! In most cases this is fine, but in rare cases it can
w2-k8s-1.20: prevent things such as shared folders from working properly. If you see
w2-k8s-1.20: shared folder errors, please make sure the guest additions within the
w2-k8s-1.20: virtual machine match the version of VirtualBox you have installed on
w2-k8s-1.20: your host and reload your VM.
w2-k8s-1.20:
w2-k8s-1.20: Guest Additions Version: 5.2.12
w2-k8s-1.20: VirtualBox Version: 6.1
==> w2-k8s-1.20: Setting hostname...
==> w2-k8s-1.20: Configuring and enabling network interfaces...
==> w2-k8s-1.20: Running provisioner: shell...
w2-k8s-1.20: Running: /tmp/vagrant-shell20210329-63160-768ayc.sh
w2-k8s-1.20: Loaded plugins: fastestmirror
w2-k8s-1.20: Determining fastest mirrors
w2-k8s-1.20: * base: ftp.kaist.ac.kr
w2-k8s-1.20: * extras: ftp.kaist.ac.kr
w2-k8s-1.20: * updates: ftp.kaist.ac.kr
w2-k8s-1.20: Package yum-utils-1.1.31-54.el7_8.noarch already installed and latest version
w2-k8s-1.20: Nothing to do
w2-k8s-1.20: Loaded plugins: fastestmirror
w2-k8s-1.20: adding repo from: https://download.docker.com/linux/centos/docker-ce.repo
w2-k8s-1.20: grabbing file https://download.docker.com/linux/centos/docker-ce.repo to /etc/yum.repos.d/docker-ce.repo
w2-k8s-1.20: repo saved to /etc/yum.repos.d/docker-ce.repo
==> w2-k8s-1.20: Running provisioner: shell...
w2-k8s-1.20: Running: /tmp/vagrant-shell20210329-63160-1yxh5dv.sh
w2-k8s-1.20: Loaded plugins: fastestmirror
w2-k8s-1.20: Loading mirror speeds from cached hostfile
w2-k8s-1.20: * base: ftp.kaist.ac.kr
w2-k8s-1.20: * extras: ftp.kaist.ac.kr
w2-k8s-1.20: * updates: ftp.kaist.ac.kr
w2-k8s-1.20: Resolving Dependencies
w2-k8s-1.20: --> Running transaction check
w2-k8s-1.20: ---> Package epel-release.noarch 0:7-11 will be installed
w2-k8s-1.20: --> Finished Dependency Resolution
w2-k8s-1.20:
w2-k8s-1.20: Dependencies Resolved
w2-k8s-1.20:
w2-k8s-1.20: ================================================================================
w2-k8s-1.20: Package Arch Version Repository Size
w2-k8s-1.20: ================================================================================
w2-k8s-1.20: Installing:
w2-k8s-1.20: epel-release noarch 7-11 extras 15 k
w2-k8s-1.20:
w2-k8s-1.20: Transaction Summary
w2-k8s-1.20: ================================================================================
w2-k8s-1.20: Install 1 Package
w2-k8s-1.20: Total download size: 15 k
w2-k8s-1.20: Installed size: 24 k
w2-k8s-1.20: Downloading packages:
w2-k8s-1.20: Running transaction check
w2-k8s-1.20: Running transaction test
w2-k8s-1.20: Transaction test succeeded
w2-k8s-1.20: Running transaction
w2-k8s-1.20: Installing : epel-release-7-11.noarch 1/1
w2-k8s-1.20:
w2-k8s-1.20: Verifying : epel-release-7-11.noarch 1/1
w2-k8s-1.20:
w2-k8s-1.20:
w2-k8s-1.20: Installed:
w2-k8s-1.20: epel-release.noarch 0:7-11
w2-k8s-1.20: Complete!
w2-k8s-1.20: Loaded plugins: fastestmirror
w2-k8s-1.20: Loading mirror speeds from cached hostfile
w2-k8s-1.20: * base: ftp.kaist.ac.kr
w2-k8s-1.20: * epel: ftp.iij.ad.jp
w2-k8s-1.20: * extras: ftp.kaist.ac.kr
w2-k8s-1.20: * updates: ftp.kaist.ac.kr
w2-k8s-1.20: http://fedora.cs.nctu.edu.tw/epel/7/x86_64/repodata/962e01e9735b70ff47c1939b3abc9fcd44b57ed8697dcd739a7e9d9a29468064-updateinfo.xml.bz2: [Errno 14] HTTP Error 404 - Not Found
w2-k8s-1.20: Trying other mirror.
w2-k8s-1.20: To address this issue please refer to the below wiki article
w2-k8s-1.20:
w2-k8s-1.20: https://wiki.centos.org/yum-errors
w2-k8s-1.20:
w2-k8s-1.20: If above article doesn't help to resolve this issue please use https://bugs.centos.org/.
w2-k8s-1.20: Resolving Dependencies
w2-k8s-1.20: --> Running transaction check
w2-k8s-1.20: ---> Package vim-enhanced.x86_64 2:7.4.629-8.el7_9 will be installed
w2-k8s-1.20: --> Processing Dependency: vim-common = 2:7.4.629-8.el7_9 for package: 2:vim-enhanced-7.4.629-8.el7_9.x86_64
w2-k8s-1.20: --> Processing Dependency: perl(:MODULE_COMPAT_5.16.3) for package: 2:vim-enhanced-7.4.629-8.el7_9.x86_64
w2-k8s-1.20: --> Processing Dependency: libperl.so()(64bit) for package: 2:vim-enhanced-7.4.629-8.el7_9.x86_64
w2-k8s-1.20: --> Processing Dependency: libgpm.so.2()(64bit) for package: 2:vim-enhanced-7.4.629-8.el7_9.x86_64
w2-k8s-1.20: --> Running transaction check
w2-k8s-1.20: ---> Package gpm-libs.x86_64 0:1.20.7-6.el7 will be installed
w2-k8s-1.20: ---> Package perl.x86_64 4:5.16.3-299.el7_9 will be installed
w2-k8s-1.20: --> Processing Dependency: perl(Socket) >= 1.3 for package: 4:perl-5.16.3-299.el7_9.x86_64
w2-k8s-1.20: --> Processing Dependency: perl(Scalar::Util) >= 1.10 for package: 4:perl-5.16.3-299.el7_9.x86_64
w2-k8s-1.20: --> Processing Dependency: perl-macros for package: 4:perl-5.16.3-299.el7_9.x86_64
w2-k8s-1.20: --> Processing Dependency: perl(threads::shared) for package: 4:perl-5.16.3-299.el7_9.x86_64
w2-k8s-1.20: --> Processing Dependency: perl(threads) for package: 4:perl-5.16.3-299.el7_9.x86_64
w2-k8s-1.20: --> Processing Dependency: perl(constant) for package: 4:perl-5.16.3-299.el7_9.x86_64
w2-k8s-1.20: --> Processing Dependency: perl(Time::Local) for package: 4:perl-5.16.3-299.el7_9.x86_64
w2-k8s-1.20: --> Processing Dependency: perl(Time::HiRes) for package: 4:perl-5.16.3-299.el7_9.x86_64
w2-k8s-1.20: --> Processing Dependency: perl(Storable) for package: 4:perl-5.16.3-299.el7_9.x86_64
w2-k8s-1.20: --> Processing Dependency: perl(Socket) for package: 4:perl-5.16.3-299.el7_9.x86_64
w2-k8s-1.20: --> Processing Dependency: perl(Scalar::Util) for package: 4:perl-5.16.3-299.el7_9.x86_64
w2-k8s-1.20: --> Processing Dependency: perl(Pod::Simple::XHTML) for package: 4:perl-5.16.3-299.el7_9.x86_64
w2-k8s-1.20: --> Processing Dependency: perl(Pod::Simple::Search) for package: 4:perl-5.16.3-299.el7_9.x86_64
w2-k8s-1.20: --> Processing Dependency: perl(Getopt::Long) for package: 4:perl-5.16.3-299.el7_9.x86_64
w2-k8s-1.20: --> Processing Dependency: perl(Filter::Util::Call) for package: 4:perl-5.16.3-299.el7_9.x86_64
w2-k8s-1.20: --> Processing Dependency: perl(File::Temp) for package: 4:perl-5.16.3-299.el7_9.x86_64
w2-k8s-1.20: --> Processing Dependency: perl(File::Spec::Unix) for package: 4:perl-5.16.3-299.el7_9.x86_64
w2-k8s-1.20: --> Processing Dependency: perl(File::Spec::Functions) for package: 4:perl-5.16.3-299.el7_9.x86_64
w2-k8s-1.20: --> Processing Dependency: perl(File::Spec) for package: 4:perl-5.16.3-299.el7_9.x86_64
w2-k8s-1.20: --> Processing Dependency: perl(File::Path) for package: 4:perl-5.16.3-299.el7_9.x86_64
w2-k8s-1.20: --> Processing Dependency: perl(Exporter) for package: 4:perl-5.16.3-299.el7_9.x86_64
w2-k8s-1.20: --> Processing Dependency: perl(Cwd) for package: 4:perl-5.16.3-299.el7_9.x86_64
w2-k8s-1.20: --> Processing Dependency: perl(Carp) for package: 4:perl-5.16.3-299.el7_9.x86_64
w2-k8s-1.20: ---> Package perl-libs.x86_64 4:5.16.3-299.el7_9 will be installed
w2-k8s-1.20: ---> Package vim-common.x86_64 2:7.4.629-8.el7_9 will be installed
w2-k8s-1.20: --> Processing Dependency: vim-filesystem for package: 2:vim-common-7.4.629-8.el7_9.x86_64
w2-k8s-1.20: --> Running transaction check
w2-k8s-1.20: ---> Package perl-Carp.noarch 0:1.26-244.el7 will be installed
w2-k8s-1.20: ---> Package perl-Exporter.noarch 0:5.68-3.el7 will be installed
w2-k8s-1.20: ---> Package perl-File-Path.noarch 0:2.09-2.el7 will be installed
w2-k8s-1.20: ---> Package perl-File-Temp.noarch 0:0.23.01-3.el7 will be installed
w2-k8s-1.20: ---> Package perl-Filter.x86_64 0:1.49-3.el7 will be installed
w2-k8s-1.20: ---> Package perl-Getopt-Long.noarch 0:2.40-3.el7 will be installed
w2-k8s-1.20: --> Processing Dependency: perl(Pod::Usage) >= 1.14 for package: perl-Getopt-Long-2.40-3.el7.noarch
w2-k8s-1.20: --> Processing Dependency: perl(Text::ParseWords) for package: perl-Getopt-Long-2.40-3.el7.noarch
w2-k8s-1.20: ---> Package perl-PathTools.x86_64 0:3.40-5.el7 will be installed
w2-k8s-1.20: ---> Package perl-Pod-Simple.noarch 1:3.28-4.el7 will be installed
w2-k8s-1.20: --> Processing Dependency: perl(Pod::Escapes) >= 1.04 for package: 1:perl-Pod-Simple-3.28-4.el7.noarch
w2-k8s-1.20: --> Processing Dependency: perl(Encode) for package: 1:perl-Pod-Simple-3.28-4.el7.noarch
w2-k8s-1.20: ---> Package perl-Scalar-List-Utils.x86_64 0:1.27-248.el7 will be installed
w2-k8s-1.20: ---> Package perl-Socket.x86_64 0:2.010-5.el7 will be installed
w2-k8s-1.20: ---> Package perl-Storable.x86_64 0:2.45-3.el7 will be installed
w2-k8s-1.20: ---> Package perl-Time-HiRes.x86_64 4:1.9725-3.el7 will be installed
w2-k8s-1.20: ---> Package perl-Time-Local.noarch 0:1.2300-2.el7 will be installed
w2-k8s-1.20: ---> Package perl-constant.noarch 0:1.27-2.el7 will be installed
w2-k8s-1.20: ---> Package perl-macros.x86_64 4:5.16.3-299.el7_9 will be installed
w2-k8s-1.20: ---> Package perl-threads.x86_64 0:1.87-4.el7 will be installed
w2-k8s-1.20: ---> Package perl-threads-shared.x86_64 0:1.43-6.el7 will be installed
w2-k8s-1.20: ---> Package vim-filesystem.x86_64 2:7.4.629-8.el7_9 will be installed
w2-k8s-1.20: --> Running transaction check
w2-k8s-1.20: ---> Package perl-Encode.x86_64 0:2.51-7.el7 will be installed
w2-k8s-1.20: ---> Package perl-Pod-Escapes.noarch 1:1.04-299.el7_9 will be installed
w2-k8s-1.20: ---> Package perl-Pod-Usage.noarch 0:1.63-3.el7 will be installed
w2-k8s-1.20: --> Processing Dependency: perl(Pod::Text) >= 3.15 for package: perl-Pod-Usage-1.63-3.el7.noarch
w2-k8s-1.20: --> Processing Dependency: perl-Pod-Perldoc for package: perl-Pod-Usage-1.63-3.el7.noarch
w2-k8s-1.20: ---> Package perl-Text-ParseWords.noarch 0:3.29-4.el7 will be installed
w2-k8s-1.20: --> Running transaction check
w2-k8s-1.20: ---> Package perl-Pod-Perldoc.noarch 0:3.20-4.el7 will be installed
w2-k8s-1.20: --> Processing Dependency: perl(parent) for package: perl-Pod-Perldoc-3.20-4.el7.noarch
w2-k8s-1.20: --> Processing Dependency: perl(HTTP::Tiny) for package: perl-Pod-Perldoc-3.20-4.el7.noarch
w2-k8s-1.20: ---> Package perl-podlators.noarch 0:2.5.1-3.el7 will be installed
w2-k8s-1.20: --> Running transaction check
w2-k8s-1.20: ---> Package perl-HTTP-Tiny.noarch 0:0.033-3.el7 will be installed
w2-k8s-1.20: ---> Package perl-parent.noarch 1:0.225-244.el7 will be installed
w2-k8s-1.20: --> Finished Dependency Resolution
w2-k8s-1.20:
w2-k8s-1.20: Dependencies Resolved
w2-k8s-1.20:
w2-k8s-1.20: ================================================================================
w2-k8s-1.20: Package Arch Version Repository Size
w2-k8s-1.20: ================================================================================
w2-k8s-1.20: Installing:
w2-k8s-1.20: vim-enhanced x86_64 2:7.4.629-8.el7_9 updates 1.1 M
w2-k8s-1.20: Installing for dependencies:
w2-k8s-1.20: gpm-libs x86_64 1.20.7-6.el7 base 32 k
w2-k8s-1.20: perl x86_64 4:5.16.3-299.el7_9 updates 8.0 M
w2-k8s-1.20: perl-Carp noarch 1.26-244.el7 base 19 k
w2-k8s-1.20: perl-Encode x86_64 2.51-7.el7 base 1.5 M
w2-k8s-1.20: perl-Exporter noarch 5.68-3.el7 base 28 k
w2-k8s-1.20: perl-File-Path noarch 2.09-2.el7 base 26 k
w2-k8s-1.20: perl-File-Temp noarch 0.23.01-3.el7 base 56 k
w2-k8s-1.20: perl-Filter x86_64 1.49-3.el7 base 76 k
w2-k8s-1.20: perl-Getopt-Long noarch 2.40-3.el7 base 56 k
w2-k8s-1.20: perl-HTTP-Tiny noarch 0.033-3.el7 base 38 k
w2-k8s-1.20: perl-PathTools x86_64 3.40-5.el7 base 82 k
w2-k8s-1.20: perl-Pod-Escapes noarch 1:1.04-299.el7_9 updates 52 k
w2-k8s-1.20: perl-Pod-Perldoc noarch 3.20-4.el7 base 87 k
w2-k8s-1.20: perl-Pod-Simple noarch 1:3.28-4.el7 base 216 k
w2-k8s-1.20: perl-Pod-Usage noarch 1.63-3.el7 base 27 k
w2-k8s-1.20: perl-Scalar-List-Utils x86_64 1.27-248.el7 base 36 k
w2-k8s-1.20: perl-Socket x86_64 2.010-5.el7 base 49 k
w2-k8s-1.20: perl-Storable x86_64 2.45-3.el7 base 77 k
w2-k8s-1.20: perl-Text-ParseWords noarch 3.29-4.el7 base 14 k
w2-k8s-1.20: perl-Time-HiRes x86_64 4:1.9725-3.el7 base 45 k
w2-k8s-1.20: perl-Time-Local noarch 1.2300-2.el7 base 24 k
w2-k8s-1.20: perl-constant noarch 1.27-2.el7 base 19 k
w2-k8s-1.20: perl-libs x86_64 4:5.16.3-299.el7_9 updates 690 k
w2-k8s-1.20: perl-macros x86_64 4:5.16.3-299.el7_9 updates 44 k
w2-k8s-1.20: perl-parent noarch 1:0.225-244.el7 base 12 k
w2-k8s-1.20: perl-podlators noarch 2.5.1-3.el7 base 112 k
w2-k8s-1.20: perl-threads x86_64 1.87-4.el7 base 49 k
w2-k8s-1.20: perl-threads-shared x86_64 1.43-6.el7 base 39 k
w2-k8s-1.20: vim-common x86_64 2:7.4.629-8.el7_9 updates 5.9 M
w2-k8s-1.20: vim-filesystem x86_64 2:7.4.629-8.el7_9 updates 11 k
w2-k8s-1.20:
w2-k8s-1.20: Transaction Summary
w2-k8s-1.20: ================================================================================
w2-k8s-1.20: Install 1 Package (+30 Dependent packages)
w2-k8s-1.20: Total download size: 18 M
w2-k8s-1.20: Installed size: 60 M
w2-k8s-1.20: Downloading packages:
w2-k8s-1.20: --------------------------------------------------------------------------------
w2-k8s-1.20: Total 8.4 MB/s | 18 MB 00:02
w2-k8s-1.20: Running transaction check
w2-k8s-1.20: Running transaction test
w2-k8s-1.20: Transaction test succeeded
w2-k8s-1.20: Running transaction
w2-k8s-1.20: Installing : 1:perl-parent-0.225-244.el7.noarch 1/31
w2-k8s-1.20:
w2-k8s-1.20: Installing : perl-HTTP-Tiny-0.033-3.el7.noarch 2/31
w2-k8s-1.20:
w2-k8s-1.20: Installing : perl-podlators-2.5.1-3.el7.noarch 3/31
w2-k8s-1.20:
w2-k8s-1.20: Installing : perl-Pod-Perldoc-3.20-4.el7.noarch 4/31
w2-k8s-1.20:
w2-k8s-1.20: Installing : 1:perl-Pod-Escapes-1.04-299.el7_9.noarch 5/31
w2-k8s-1.20:
w2-k8s-1.20: Installing : perl-Encode-2.51-7.el7.x86_64 6/31
w2-k8s-1.20:
w2-k8s-1.20: Installing : perl-Text-ParseWords-3.29-4.el7.noarch 7/31
w2-k8s-1.20:
w2-k8s-1.20: Installing : perl-Pod-Usage-1.63-3.el7.noarch 8/31
w2-k8s-1.20:
w2-k8s-1.20: Installing : 4:perl-macros-5.16.3-299.el7_9.x86_64 9/31
w2-k8s-1.20:
w2-k8s-1.20: Installing : perl-Storable-2.45-3.el7.x86_64 10/31
w2-k8s-1.20:
w2-k8s-1.20: Installing : perl-Exporter-5.68-3.el7.noarch 11/31
w2-k8s-1.20:
w2-k8s-1.20: Installing : perl-constant-1.27-2.el7.noarch 12/31
w2-k8s-1.20:
w2-k8s-1.20: Installing : perl-Socket-2.010-5.el7.x86_64 13/31
w2-k8s-1.20:
w2-k8s-1.20: Installing : perl-Time-Local-1.2300-2.el7.noarch 14/31
w2-k8s-1.20:
w2-k8s-1.20: Installing : perl-Carp-1.26-244.el7.noarch 15/31
w2-k8s-1.20:
w2-k8s-1.20: Installing : perl-PathTools-3.40-5.el7.x86_64 16/31
w2-k8s-1.20:
w2-k8s-1.20: Installing : perl-Scalar-List-Utils-1.27-248.el7.x86_64 17/31
w2-k8s-1.20:
w2-k8s-1.20: Installing : 1:perl-Pod-Simple-3.28-4.el7.noarch 18/31
w2-k8s-1.20:
w2-k8s-1.20: Installing : perl-File-Temp-0.23.01-3.el7.noarch 19/31
w2-k8s-1.20:
w2-k8s-1.20: Installing : perl-File-Path-2.09-2.el7.noarch 20/31
w2-k8s-1.20:
w2-k8s-1.20: Installing : perl-threads-shared-1.43-6.el7.x86_64 21/31
w2-k8s-1.20:
w2-k8s-1.20: Installing : perl-threads-1.87-4.el7.x86_64 22/31
w2-k8s-1.20:
w2-k8s-1.20: Installing : 4:perl-Time-HiRes-1.9725-3.el7.x86_64 23/31
w2-k8s-1.20:
w2-k8s-1.20: Installing : perl-Filter-1.49-3.el7.x86_64 24/31
w2-k8s-1.20:
w2-k8s-1.20: Installing : 4:perl-libs-5.16.3-299.el7_9.x86_64 25/31
w2-k8s-1.20:
w2-k8s-1.20: Installing : perl-Getopt-Long-2.40-3.el7.noarch 26/31
w2-k8s-1.20:
w2-k8s-1.20: Installing : 4:perl-5.16.3-299.el7_9.x86_64 27/31
w2-k8s-1.20:
w2-k8s-1.20: Installing : gpm-libs-1.20.7-6.el7.x86_64 28/31
w2-k8s-1.20:
w2-k8s-1.20: Installing : 2:vim-filesystem-7.4.629-8.el7_9.x86_64 29/31
w2-k8s-1.20:
w2-k8s-1.20: Installing : 2:vim-common-7.4.629-8.el7_9.x86_64 30/31
w2-k8s-1.20:
w2-k8s-1.20: Installing : 2:vim-enhanced-7.4.629-8.el7_9.x86_64 31/31
w2-k8s-1.20:
w2-k8s-1.20: Verifying : perl-HTTP-Tiny-0.033-3.el7.noarch 1/31
w2-k8s-1.20:
w2-k8s-1.20: Verifying : perl-threads-shared-1.43-6.el7.x86_64 2/31
w2-k8s-1.20:
w2-k8s-1.20: Verifying : perl-Storable-2.45-3.el7.x86_64 3/31
w2-k8s-1.20:
w2-k8s-1.20: Verifying : perl-Exporter-5.68-3.el7.noarch 4/31
w2-k8s-1.20:
w2-k8s-1.20: Verifying : perl-constant-1.27-2.el7.noarch 5/31
w2-k8s-1.20:
w2-k8s-1.20: Verifying : perl-PathTools-3.40-5.el7.x86_64 6/31
w2-k8s-1.20:
w2-k8s-1.20: Verifying : 4:perl-macros-5.16.3-299.el7_9.x86_64 7/31
w2-k8s-1.20:
w2-k8s-1.20: Verifying : 2:vim-enhanced-7.4.629-8.el7_9.x86_64 8/31
w2-k8s-1.20:
w2-k8s-1.20: Verifying : 1:perl-parent-0.225-244.el7.noarch 9/31
w2-k8s-1.20:
w2-k8s-1.20: Verifying : perl-Socket-2.010-5.el7.x86_64 10/31
w2-k8s-1.20:
w2-k8s-1.20: Verifying : 2:vim-filesystem-7.4.629-8.el7_9.x86_64 11/31
w2-k8s-1.20:
w2-k8s-1.20: Verifying : perl-File-Temp-0.23.01-3.el7.noarch 12/31
w2-k8s-1.20:
w2-k8s-1.20: Verifying : 1:perl-Pod-Simple-3.28-4.el7.noarch 13/31
w2-k8s-1.20:
w2-k8s-1.20: Verifying : perl-Time-Local-1.2300-2.el7.noarch 14/31
w2-k8s-1.20:
w2-k8s-1.20: Verifying : 1:perl-Pod-Escapes-1.04-299.el7_9.noarch 15/31
w2-k8s-1.20:
w2-k8s-1.20: Verifying : perl-Carp-1.26-244.el7.noarch 16/31
w2-k8s-1.20:
w2-k8s-1.20: Verifying : 2:vim-common-7.4.629-8.el7_9.x86_64 17/31
w2-k8s-1.20:
w2-k8s-1.20: Verifying : perl-Scalar-List-Utils-1.27-248.el7.x86_64 18/31
w2-k8s-1.20:
w2-k8s-1.20: Verifying : perl-Pod-Usage-1.63-3.el7.noarch 19/31
w2-k8s-1.20:
w2-k8s-1.20: Verifying : perl-Encode-2.51-7.el7.x86_64 20/31
w2-k8s-1.20:
w2-k8s-1.20: Verifying : perl-Pod-Perldoc-3.20-4.el7.noarch 21/31
w2-k8s-1.20:
w2-k8s-1.20: Verifying : perl-podlators-2.5.1-3.el7.noarch 22/31
w2-k8s-1.20:
w2-k8s-1.20: Verifying : 4:perl-5.16.3-299.el7_9.x86_64 23/31
w2-k8s-1.20:
w2-k8s-1.20: Verifying : perl-File-Path-2.09-2.el7.noarch 24/31
w2-k8s-1.20:
w2-k8s-1.20: Verifying : perl-threads-1.87-4.el7.x86_64 25/31
w2-k8s-1.20:
w2-k8s-1.20: Verifying : 4:perl-Time-HiRes-1.9725-3.el7.x86_64 26/31
w2-k8s-1.20:
w2-k8s-1.20: Verifying : gpm-libs-1.20.7-6.el7.x86_64 27/31
w2-k8s-1.20:
w2-k8s-1.20: Verifying : perl-Filter-1.49-3.el7.x86_64 28/31
w2-k8s-1.20:
w2-k8s-1.20: Verifying : perl-Getopt-Long-2.40-3.el7.noarch 29/31
w2-k8s-1.20:
w2-k8s-1.20: Verifying : perl-Text-ParseWords-3.29-4.el7.noarch 30/31
w2-k8s-1.20:
w2-k8s-1.20: Verifying : 4:perl-libs-5.16.3-299.el7_9.x86_64 31/31
w2-k8s-1.20:
w2-k8s-1.20:
w2-k8s-1.20: Installed:
w2-k8s-1.20: vim-enhanced.x86_64 2:7.4.629-8.el7_9
w2-k8s-1.20:
w2-k8s-1.20: Dependency Installed:
w2-k8s-1.20: gpm-libs.x86_64 0:1.20.7-6.el7
w2-k8s-1.20: perl.x86_64 4:5.16.3-299.el7_9
w2-k8s-1.20: perl-Carp.noarch 0:1.26-244.el7
w2-k8s-1.20: perl-Encode.x86_64 0:2.51-7.el7
w2-k8s-1.20: perl-Exporter.noarch 0:5.68-3.el7
w2-k8s-1.20: perl-File-Path.noarch 0:2.09-2.el7
w2-k8s-1.20: perl-File-Temp.noarch 0:0.23.01-3.el7
w2-k8s-1.20: perl-Filter.x86_64 0:1.49-3.el7
w2-k8s-1.20: perl-Getopt-Long.noarch 0:2.40-3.el7
w2-k8s-1.20: perl-HTTP-Tiny.noarch 0:0.033-3.el7
w2-k8s-1.20: perl-PathTools.x86_64 0:3.40-5.el7
w2-k8s-1.20: perl-Pod-Escapes.noarch 1:1.04-299.el7_9
w2-k8s-1.20: perl-Pod-Perldoc.noarch 0:3.20-4.el7
w2-k8s-1.20: perl-Pod-Simple.noarch 1:3.28-4.el7
w2-k8s-1.20: perl-Pod-Usage.noarch 0:1.63-3.el7
w2-k8s-1.20: perl-Scalar-List-Utils.x86_64 0:1.27-248.el7
w2-k8s-1.20: perl-Socket.x86_64 0:2.010-5.el7
w2-k8s-1.20: perl-Storable.x86_64 0:2.45-3.el7
w2-k8s-1.20: perl-Text-ParseWords.noarch 0:3.29-4.el7
w2-k8s-1.20: perl-Time-HiRes.x86_64 4:1.9725-3.el7
w2-k8s-1.20: perl-Time-Local.noarch 0:1.2300-2.el7
w2-k8s-1.20: perl-constant.noarch 0:1.27-2.el7
w2-k8s-1.20: perl-libs.x86_64 4:5.16.3-299.el7_9
w2-k8s-1.20: perl-macros.x86_64 4:5.16.3-299.el7_9
w2-k8s-1.20: perl-parent.noarch 1:0.225-244.el7
w2-k8s-1.20: perl-podlators.noarch 0:2.5.1-3.el7
w2-k8s-1.20: perl-threads.x86_64 0:1.87-4.el7
w2-k8s-1.20: perl-threads-shared.x86_64 0:1.43-6.el7
w2-k8s-1.20: vim-common.x86_64 2:7.4.629-8.el7_9
w2-k8s-1.20: vim-filesystem.x86_64 2:7.4.629-8.el7_9
w2-k8s-1.20: Complete!
w2-k8s-1.20: Loaded plugins: fastestmirror
w2-k8s-1.20: Loading mirror speeds from cached hostfile
w2-k8s-1.20: * base: ftp.kaist.ac.kr
w2-k8s-1.20: * epel: ftp.iij.ad.jp
w2-k8s-1.20: * extras: ftp.kaist.ac.kr
w2-k8s-1.20: * updates: ftp.kaist.ac.kr
w2-k8s-1.20: Resolving Dependencies
w2-k8s-1.20: --> Running transaction check
w2-k8s-1.20: ---> Package git.x86_64 0:1.8.3.1-23.el7_8 will be installed
w2-k8s-1.20: --> Processing Dependency: perl-Git = 1.8.3.1-23.el7_8 for package: git-1.8.3.1-23.el7_8.x86_64
w2-k8s-1.20: --> Processing Dependency: rsync for package: git-1.8.3.1-23.el7_8.x86_64
w2-k8s-1.20: --> Processing Dependency: perl(Term::ReadKey) for package: git-1.8.3.1-23.el7_8.x86_64
w2-k8s-1.20: --> Processing Dependency: perl(Git) for package: git-1.8.3.1-23.el7_8.x86_64
w2-k8s-1.20: --> Processing Dependency: perl(Error) for package: git-1.8.3.1-23.el7_8.x86_64
w2-k8s-1.20: --> Running transaction check
w2-k8s-1.20: ---> Package perl-Error.noarch 1:0.17020-2.el7 will be installed
w2-k8s-1.20: ---> Package perl-Git.noarch 0:1.8.3.1-23.el7_8 will be installed
w2-k8s-1.20: ---> Package perl-TermReadKey.x86_64 0:2.30-20.el7 will be installed
w2-k8s-1.20: ---> Package rsync.x86_64 0:3.1.2-10.el7 will be installed
w2-k8s-1.20: --> Finished Dependency Resolution
w2-k8s-1.20:
w2-k8s-1.20: Dependencies Resolved
w2-k8s-1.20:
w2-k8s-1.20: ================================================================================
w2-k8s-1.20: Package Arch Version Repository Size
w2-k8s-1.20: ================================================================================
w2-k8s-1.20: Installing:
w2-k8s-1.20: git x86_64 1.8.3.1-23.el7_8 base 4.4 M
w2-k8s-1.20: Installing for dependencies:
w2-k8s-1.20: perl-Error noarch 1:0.17020-2.el7 base 32 k
w2-k8s-1.20: perl-Git noarch 1.8.3.1-23.el7_8 base 56 k
w2-k8s-1.20: perl-TermReadKey x86_64 2.30-20.el7 base 31 k
w2-k8s-1.20: rsync x86_64 3.1.2-10.el7 base 404 k
w2-k8s-1.20:
w2-k8s-1.20: Transaction Summary
w2-k8s-1.20: ================================================================================
w2-k8s-1.20: Install 1 Package (+4 Dependent packages)
w2-k8s-1.20: Total download size: 4.9 M
w2-k8s-1.20: Installed size: 23 M
w2-k8s-1.20: Downloading packages:
w2-k8s-1.20: --------------------------------------------------------------------------------
w2-k8s-1.20: Total 8.1 MB/s | 4.9 MB 00:00
w2-k8s-1.20: Running transaction check
w2-k8s-1.20: Running transaction test
w2-k8s-1.20: Transaction test succeeded
w2-k8s-1.20: Running transaction
w2-k8s-1.20: Installing : 1:perl-Error-0.17020-2.el7.noarch 1/5
w2-k8s-1.20:
w2-k8s-1.20: Installing : rsync-3.1.2-10.el7.x86_64 2/5
w2-k8s-1.20:
w2-k8s-1.20: Installing : perl-TermReadKey-2.30-20.el7.x86_64 3/5
w2-k8s-1.20:
w2-k8s-1.20: Installing : perl-Git-1.8.3.1-23.el7_8.noarch 4/5
w2-k8s-1.20:
w2-k8s-1.20: Installing : git-1.8.3.1-23.el7_8.x86_64 5/5
w2-k8s-1.20:
w2-k8s-1.20: Verifying : git-1.8.3.1-23.el7_8.x86_64 1/5
w2-k8s-1.20:
w2-k8s-1.20: Verifying : 1:perl-Error-0.17020-2.el7.noarch 2/5
w2-k8s-1.20:
w2-k8s-1.20: Verifying : perl-TermReadKey-2.30-20.el7.x86_64 3/5
w2-k8s-1.20:
w2-k8s-1.20: Verifying : perl-Git-1.8.3.1-23.el7_8.noarch 4/5
w2-k8s-1.20:
w2-k8s-1.20: Verifying : rsync-3.1.2-10.el7.x86_64 5/5
w2-k8s-1.20:
w2-k8s-1.20:
w2-k8s-1.20: Installed:
w2-k8s-1.20: git.x86_64 0:1.8.3.1-23.el7_8
w2-k8s-1.20:
w2-k8s-1.20: Dependency Installed:
w2-k8s-1.20: perl-Error.noarch 1:0.17020-2.el7 perl-Git.noarch 0:1.8.3.1-23.el7_8
w2-k8s-1.20: perl-TermReadKey.x86_64 0:2.30-20.el7 rsync.x86_64 0:3.1.2-10.el7
w2-k8s-1.20: Complete!
w2-k8s-1.20: Loaded plugins: fastestmirror
w2-k8s-1.20: Loading mirror speeds from cached hostfile
w2-k8s-1.20: * base: ftp.kaist.ac.kr
w2-k8s-1.20: * epel: ftp.iij.ad.jp
w2-k8s-1.20: * extras: ftp.kaist.ac.kr
w2-k8s-1.20: * updates: ftp.kaist.ac.kr
w2-k8s-1.20: Resolving Dependencies
w2-k8s-1.20: --> Running transaction check
w2-k8s-1.20: ---> Package containerd.io.x86_64 0:1.3.9-3.1.el7 will be installed
w2-k8s-1.20: --> Processing Dependency: container-selinux >= 2:2.74 for package: containerd.io-1.3.9-3.1.el7.x86_64
w2-k8s-1.20: ---> Package docker-ce.x86_64 3:19.03.14-3.el7 will be installed
w2-k8s-1.20: --> Processing Dependency: libcgroup for package: 3:docker-ce-19.03.14-3.el7.x86_64
w2-k8s-1.20: ---> Package docker-ce-cli.x86_64 1:19.03.14-3.el7 will be installed
w2-k8s-1.20: --> Running transaction check
w2-k8s-1.20: ---> Package container-selinux.noarch 2:2.119.2-1.911c772.el7_8 will be installed
w2-k8s-1.20: --> Processing Dependency: policycoreutils-python for package: 2:container-selinux-2.119.2-1.911c772.el7_8.noarch
w2-k8s-1.20: ---> Package libcgroup.x86_64 0:0.41-21.el7 will be installed
w2-k8s-1.20: --> Running transaction check
w2-k8s-1.20: ---> Package policycoreutils-python.x86_64 0:2.5-34.el7 will be installed
w2-k8s-1.20: --> Processing Dependency: setools-libs >= 3.3.8-4 for package: policycoreutils-python-2.5-34.el7.x86_64
w2-k8s-1.20: --> Processing Dependency: libsemanage-python >= 2.5-14 for package: policycoreutils-python-2.5-34.el7.x86_64
w2-k8s-1.20: --> Processing Dependency: audit-libs-python >= 2.1.3-4 for package: policycoreutils-python-2.5-34.el7.x86_64
w2-k8s-1.20: --> Processing Dependency: python-IPy for package: policycoreutils-python-2.5-34.el7.x86_64
w2-k8s-1.20: --> Processing Dependency: libqpol.so.1(VERS_1.4)(64bit) for package: policycoreutils-python-2.5-34.el7.x86_64
w2-k8s-1.20: --> Processing Dependency: libqpol.so.1(VERS_1.2)(64bit) for package: policycoreutils-python-2.5-34.el7.x86_64
w2-k8s-1.20: --> Processing Dependency: libapol.so.4(VERS_4.0)(64bit) for package: policycoreutils-python-2.5-34.el7.x86_64
w2-k8s-1.20: --> Processing Dependency: checkpolicy for package: policycoreutils-python-2.5-34.el7.x86_64
w2-k8s-1.20: --> Processing Dependency: libqpol.so.1()(64bit) for package: policycoreutils-python-2.5-34.el7.x86_64
w2-k8s-1.20: --> Processing Dependency: libapol.so.4()(64bit) for package: policycoreutils-python-2.5-34.el7.x86_64
w2-k8s-1.20: --> Running transaction check
w2-k8s-1.20: ---> Package audit-libs-python.x86_64 0:2.8.5-4.el7 will be installed
w2-k8s-1.20: ---> Package checkpolicy.x86_64 0:2.5-8.el7 will be installed
w2-k8s-1.20: ---> Package libsemanage-python.x86_64 0:2.5-14.el7 will be installed
w2-k8s-1.20: ---> Package python-IPy.noarch 0:0.75-6.el7 will be installed
w2-k8s-1.20: ---> Package setools-libs.x86_64 0:3.3.8-4.el7 will be installed
w2-k8s-1.20: --> Finished Dependency Resolution
w2-k8s-1.20:
w2-k8s-1.20: Dependencies Resolved
w2-k8s-1.20:
w2-k8s-1.20: ================================================================================
w2-k8s-1.20: Package Arch Version Repository Size
w2-k8s-1.20: ================================================================================
w2-k8s-1.20: Installing:
w2-k8s-1.20: containerd.io x86_64 1.3.9-3.1.el7 docker-ce-stable 29 M
w2-k8s-1.20: docker-ce x86_64 3:19.03.14-3.el7 docker-ce-stable 24 M
w2-k8s-1.20: docker-ce-cli x86_64 1:19.03.14-3.el7 docker-ce-stable 38 M
w2-k8s-1.20: Installing for dependencies:
w2-k8s-1.20: audit-libs-python x86_64 2.8.5-4.el7 base 76 k
w2-k8s-1.20: checkpolicy x86_64 2.5-8.el7 base 295 k
w2-k8s-1.20: container-selinux noarch 2:2.119.2-1.911c772.el7_8 extras 40 k
w2-k8s-1.20: libcgroup x86_64 0.41-21.el7 base 66 k
w2-k8s-1.20: libsemanage-python x86_64 2.5-14.el7 base 113 k
w2-k8s-1.20: policycoreutils-python x86_64 2.5-34.el7 base 457 k
w2-k8s-1.20: python-IPy noarch 0.75-6.el7 base 32 k
w2-k8s-1.20: setools-libs x86_64 3.3.8-4.el7 base 620 k
w2-k8s-1.20:
w2-k8s-1.20: Transaction Summary
w2-k8s-1.20: ================================================================================
w2-k8s-1.20: Install 3 Packages (+8 Dependent packages)
w2-k8s-1.20: Total download size: 93 M
w2-k8s-1.20: Installed size: 393 M
w2-k8s-1.20: Downloading packages:
w2-k8s-1.20: warning:
w2-k8s-1.20: /var/cache/yum/x86_64/7/docker-ce-stable/packages/docker-ce-19.03.14-3.el7.x86_64.rpm: Header V4 RSA/SHA512 Signature, key ID 621e9f35: NOKEY
w2-k8s-1.20: Public key for docker-ce-19.03.14-3.el7.x86_64.rpm is not installed
w2-k8s-1.20: --------------------------------------------------------------------------------
w2-k8s-1.20: Total 10 MB/s | 93 MB 00:09
w2-k8s-1.20: Retrieving key from https://download.docker.com/linux/centos/gpg
w2-k8s-1.20: Importing GPG key 0x621E9F35:
w2-k8s-1.20: Userid : "Docker Release (CE rpm) <docker@docker.com>"
w2-k8s-1.20: Fingerprint: 060a 61c5 1b55 8a7f 742b 77aa c52f eb6b 621e 9f35
w2-k8s-1.20: From : https://download.docker.com/linux/centos/gpg
w2-k8s-1.20: Running transaction check
w2-k8s-1.20: Running transaction test
w2-k8s-1.20: Transaction test succeeded
w2-k8s-1.20: Running transaction
w2-k8s-1.20: Installing : libcgroup-0.41-21.el7.x86_64 1/11
w2-k8s-1.20:
w2-k8s-1.20: Installing : setools-libs-3.3.8-4.el7.x86_64 2/11
w2-k8s-1.20:
w2-k8s-1.20: Installing : 1:docker-ce-cli-19.03.14-3.el7.x86_64 3/11
w2-k8s-1.20:
w2-k8s-1.20: Installing : audit-libs-python-2.8.5-4.el7.x86_64 4/11
w2-k8s-1.20:
w2-k8s-1.20: Installing : python-IPy-0.75-6.el7.noarch 5/11
w2-k8s-1.20:
w2-k8s-1.20: Installing : libsemanage-python-2.5-14.el7.x86_64 6/11
w2-k8s-1.20:
w2-k8s-1.20: Installing : checkpolicy-2.5-8.el7.x86_64 7/11
w2-k8s-1.20:
w2-k8s-1.20: Installing : policycoreutils-python-2.5-34.el7.x86_64 8/11
w2-k8s-1.20:
w2-k8s-1.20: Installing : 2:container-selinux-2.119.2-1.911c772.el7_8.noarch 9/11
w2-k8s-1.20:
w2-k8s-1.20: Installing : containerd.io-1.3.9-3.1.el7.x86_64 10/11
w2-k8s-1.20:
w2-k8s-1.20: Installing : 3:docker-ce-19.03.14-3.el7.x86_64 11/11
w2-k8s-1.20:
w2-k8s-1.20: Verifying : checkpolicy-2.5-8.el7.x86_64 1/11
w2-k8s-1.20:
w2-k8s-1.20: Verifying : 3:docker-ce-19.03.14-3.el7.x86_64 2/11
w2-k8s-1.20:
w2-k8s-1.20: Verifying : containerd.io-1.3.9-3.1.el7.x86_64 3/11
w2-k8s-1.20:
w2-k8s-1.20: Verifying : libsemanage-python-2.5-14.el7.x86_64 4/11
w2-k8s-1.20:
w2-k8s-1.20: Verifying : 2:container-selinux-2.119.2-1.911c772.el7_8.noarch 5/11
w2-k8s-1.20:
w2-k8s-1.20: Verifying : python-IPy-0.75-6.el7.noarch 6/11
w2-k8s-1.20:
w2-k8s-1.20: Verifying : policycoreutils-python-2.5-34.el7.x86_64 7/11
w2-k8s-1.20:
w2-k8s-1.20: Verifying : audit-libs-python-2.8.5-4.el7.x86_64 8/11
w2-k8s-1.20:
w2-k8s-1.20: Verifying : 1:docker-ce-cli-19.03.14-3.el7.x86_64 9/11
w2-k8s-1.20:
w2-k8s-1.20: Verifying : setools-libs-3.3.8-4.el7.x86_64 10/11
w2-k8s-1.20:
w2-k8s-1.20: Verifying : libcgroup-0.41-21.el7.x86_64 11/11
w2-k8s-1.20:
w2-k8s-1.20:
w2-k8s-1.20: Installed:
w2-k8s-1.20: containerd.io.x86_64 0:1.3.9-3.1.el7 docker-ce.x86_64 3:19.03.14-3.el7
w2-k8s-1.20: docker-ce-cli.x86_64 1:19.03.14-3.el7
w2-k8s-1.20:
w2-k8s-1.20: Dependency Installed:
w2-k8s-1.20: audit-libs-python.x86_64 0:2.8.5-4.el7
w2-k8s-1.20: checkpolicy.x86_64 0:2.5-8.el7
w2-k8s-1.20: container-selinux.noarch 2:2.119.2-1.911c772.el7_8
w2-k8s-1.20: libcgroup.x86_64 0:0.41-21.el7
w2-k8s-1.20: libsemanage-python.x86_64 0:2.5-14.el7
w2-k8s-1.20: policycoreutils-python.x86_64 0:2.5-34.el7
w2-k8s-1.20: python-IPy.noarch 0:0.75-6.el7
w2-k8s-1.20: setools-libs.x86_64 0:3.3.8-4.el7
w2-k8s-1.20: Complete!
w2-k8s-1.20: Loaded plugins: fastestmirror
w2-k8s-1.20: Loading mirror speeds from cached hostfile
w2-k8s-1.20: * base: ftp.kaist.ac.kr
w2-k8s-1.20: * epel: ftp.iij.ad.jp
w2-k8s-1.20: * extras: ftp.kaist.ac.kr
w2-k8s-1.20: * updates: ftp.kaist.ac.kr
w2-k8s-1.20: Resolving Dependencies
w2-k8s-1.20: --> Running transaction check
w2-k8s-1.20: ---> Package kubeadm.x86_64 0:1.20.2-0 will be installed
w2-k8s-1.20: --> Processing Dependency: kubernetes-cni >= 0.8.6 for package: kubeadm-1.20.2-0.x86_64
w2-k8s-1.20: --> Processing Dependency: cri-tools >= 1.13.0 for package: kubeadm-1.20.2-0.x86_64
w2-k8s-1.20: ---> Package kubectl.x86_64 0:1.20.2-0 will be installed
w2-k8s-1.20: ---> Package kubelet.x86_64 0:1.20.2-0 will be installed
w2-k8s-1.20: --> Processing Dependency: socat for package: kubelet-1.20.2-0.x86_64
w2-k8s-1.20: --> Processing Dependency: conntrack for package: kubelet-1.20.2-0.x86_64
w2-k8s-1.20: --> Running transaction check
w2-k8s-1.20: ---> Package conntrack-tools.x86_64 0:1.4.4-7.el7 will be installed
w2-k8s-1.20: --> Processing Dependency: libnetfilter_cttimeout.so.1(LIBNETFILTER_CTTIMEOUT_1.1)(64bit) for package: conntrack-tools-1.4.4-7.el7.x86_64
w2-k8s-1.20: --> Processing Dependency: libnetfilter_cttimeout.so.1(LIBNETFILTER_CTTIMEOUT_1.0)(64bit) for package: conntrack-tools-1.4.4-7.el7.x86_64
w2-k8s-1.20: --> Processing Dependency: libnetfilter_cthelper.so.0(LIBNETFILTER_CTHELPER_1.0)(64bit) for package: conntrack-tools-1.4.4-7.el7.x86_64
w2-k8s-1.20: --> Processing Dependency: libnetfilter_queue.so.1()(64bit) for package: conntrack-tools-1.4.4-7.el7.x86_64
w2-k8s-1.20: --> Processing Dependency: libnetfilter_cttimeout.so.1()(64bit) for package: conntrack-tools-1.4.4-7.el7.x86_64
w2-k8s-1.20: --> Processing Dependency: libnetfilter_cthelper.so.0()(64bit) for package: conntrack-tools-1.4.4-7.el7.x86_64
w2-k8s-1.20: ---> Package cri-tools.x86_64 0:1.13.0-0 will be installed
w2-k8s-1.20: ---> Package kubernetes-cni.x86_64 0:0.8.7-0 will be installed
w2-k8s-1.20: ---> Package socat.x86_64 0:1.7.3.2-2.el7 will be installed
w2-k8s-1.20: --> Running transaction check
w2-k8s-1.20: ---> Package libnetfilter_cthelper.x86_64 0:1.0.0-11.el7 will be installed
w2-k8s-1.20: ---> Package libnetfilter_cttimeout.x86_64 0:1.0.0-7.el7 will be installed
w2-k8s-1.20: ---> Package libnetfilter_queue.x86_64 0:1.0.2-2.el7_2 will be installed
w2-k8s-1.20: --> Finished Dependency Resolution
w2-k8s-1.20:
w2-k8s-1.20: Dependencies Resolved
w2-k8s-1.20:
w2-k8s-1.20: ================================================================================
w2-k8s-1.20: Package Arch Version Repository Size
w2-k8s-1.20: ================================================================================
w2-k8s-1.20: Installing:
w2-k8s-1.20: kubeadm x86_64 1.20.2-0 kubernetes 8.3 M
w2-k8s-1.20: kubectl x86_64 1.20.2-0 kubernetes 8.5 M
w2-k8s-1.20: kubelet x86_64 1.20.2-0 kubernetes 20 M
w2-k8s-1.20: Installing for dependencies:
w2-k8s-1.20: conntrack-tools x86_64 1.4.4-7.el7 base 187 k
w2-k8s-1.20: cri-tools x86_64 1.13.0-0 kubernetes 5.1 M
w2-k8s-1.20: kubernetes-cni x86_64 0.8.7-0 kubernetes 19 M
w2-k8s-1.20: libnetfilter_cthelper x86_64 1.0.0-11.el7 base 18 k
w2-k8s-1.20: libnetfilter_cttimeout x86_64 1.0.0-7.el7 base 18 k
w2-k8s-1.20: libnetfilter_queue x86_64 1.0.2-2.el7_2 base 23 k
w2-k8s-1.20: socat x86_64 1.7.3.2-2.el7 base 290 k
w2-k8s-1.20:
w2-k8s-1.20: Transaction Summary
w2-k8s-1.20: ================================================================================
w2-k8s-1.20: Install 3 Packages (+7 Dependent packages)
w2-k8s-1.20: Total download size: 61 M
w2-k8s-1.20: Installed size: 262 M
w2-k8s-1.20: Downloading packages:
w2-k8s-1.20: warning:
w2-k8s-1.20: /var/cache/yum/x86_64/7/kubernetes/packages/14bfe6e75a9efc8eca3f638eb22c7e2ce759c67f95b43b16fae4ebabde1549f3-cri-tools-1.13.0-0.x86_64.rpm: Header V4 RSA/SHA512 Signature, key ID 3e1ba8d5: NOKEY
w2-k8s-1.20: Public key for 14bfe6e75a9efc8eca3f638eb22c7e2ce759c67f95b43b16fae4ebabde1549f3-cri-tools-1.13.0-0.x86_64.rpm is not installed
w2-k8s-1.20: --------------------------------------------------------------------------------
w2-k8s-1.20: Total 8.3 MB/s | 61 MB 00:07
w2-k8s-1.20: Retrieving key from https://packages.cloud.google.com/yum/doc/yum-key.gpg
w2-k8s-1.20: Importing GPG key 0xA7317B0F:
w2-k8s-1.20: Userid : "Google Cloud Packages Automatic Signing Key <gc-team@google.com>"
w2-k8s-1.20: Fingerprint: d0bc 747f d8ca f711 7500 d6fa 3746 c208 a731 7b0f
w2-k8s-1.20: From : https://packages.cloud.google.com/yum/doc/yum-key.gpg
w2-k8s-1.20: Importing GPG key 0xBA07F4FB:
w2-k8s-1.20: Userid : "Google Cloud Packages Automatic Signing Key <gc-team@google.com>"
w2-k8s-1.20: Fingerprint: 54a6 47f9 048d 5688 d7da 2abe 6a03 0b21 ba07 f4fb
w2-k8s-1.20: From : https://packages.cloud.google.com/yum/doc/yum-key.gpg
w2-k8s-1.20: Retrieving key from https://packages.cloud.google.com/yum/doc/rpm-package-key.gpg
w2-k8s-1.20: Importing GPG key 0x3E1BA8D5:
w2-k8s-1.20: Userid : "Google Cloud Packages RPM Signing Key <gc-team@google.com>"
w2-k8s-1.20: Fingerprint: 3749 e1ba 95a8 6ce0 5454 6ed2 f09c 394c 3e1b a8d5
w2-k8s-1.20: From : https://packages.cloud.google.com/yum/doc/rpm-package-key.gpg
w2-k8s-1.20: Running transaction check
w2-k8s-1.20: Running transaction test
w2-k8s-1.20: Transaction test succeeded
w2-k8s-1.20: Running transaction
w2-k8s-1.20: Installing : libnetfilter_cthelper-1.0.0-11.el7.x86_64 1/10
w2-k8s-1.20:
w2-k8s-1.20: Installing : socat-1.7.3.2-2.el7.x86_64 2/10
w2-k8s-1.20:
w2-k8s-1.20: Installing : libnetfilter_cttimeout-1.0.0-7.el7.x86_64 3/10
w2-k8s-1.20:
w2-k8s-1.20: Installing : kubectl-1.20.2-0.x86_64 4/10
w2-k8s-1.20:
w2-k8s-1.20: Installing : libnetfilter_queue-1.0.2-2.el7_2.x86_64 5/10
w2-k8s-1.20:
w2-k8s-1.20: Installing : conntrack-tools-1.4.4-7.el7.x86_64 6/10
w2-k8s-1.20:
w2-k8s-1.20: Installing : kubernetes-cni-0.8.7-0.x86_64 7/10
w2-k8s-1.20:
w2-k8s-1.20: Installing : kubelet-1.20.2-0.x86_64 8/10
w2-k8s-1.20:
w2-k8s-1.20: Installing : cri-tools-1.13.0-0.x86_64 9/10
w2-k8s-1.20:
w2-k8s-1.20: Installing : kubeadm-1.20.2-0.x86_64 10/10
w2-k8s-1.20:
w2-k8s-1.20: Verifying : conntrack-tools-1.4.4-7.el7.x86_64 1/10
w2-k8s-1.20:
w2-k8s-1.20: Verifying : kubernetes-cni-0.8.7-0.x86_64 2/10
w2-k8s-1.20:
w2-k8s-1.20: Verifying : kubelet-1.20.2-0.x86_64 3/10
w2-k8s-1.20:
w2-k8s-1.20: Verifying : kubeadm-1.20.2-0.x86_64 4/10
w2-k8s-1.20:
w2-k8s-1.20: Verifying : cri-tools-1.13.0-0.x86_64 5/10
w2-k8s-1.20:
w2-k8s-1.20: Verifying : libnetfilter_queue-1.0.2-2.el7_2.x86_64 6/10
w2-k8s-1.20:
w2-k8s-1.20: Verifying : kubectl-1.20.2-0.x86_64 7/10
w2-k8s-1.20:
w2-k8s-1.20: Verifying : libnetfilter_cttimeout-1.0.0-7.el7.x86_64 8/10
w2-k8s-1.20:
w2-k8s-1.20: Verifying : socat-1.7.3.2-2.el7.x86_64 9/10
w2-k8s-1.20:
w2-k8s-1.20: Verifying : libnetfilter_cthelper-1.0.0-11.el7.x86_64 10/10
w2-k8s-1.20:
w2-k8s-1.20:
w2-k8s-1.20: Installed:
w2-k8s-1.20: kubeadm.x86_64 0:1.20.2-0 kubectl.x86_64 0:1.20.2-0 kubelet.x86_64 0:1.20.2-0
w2-k8s-1.20:
w2-k8s-1.20: Dependency Installed:
w2-k8s-1.20: conntrack-tools.x86_64 0:1.4.4-7.el7
w2-k8s-1.20: cri-tools.x86_64 0:1.13.0-0
w2-k8s-1.20: kubernetes-cni.x86_64 0:0.8.7-0
w2-k8s-1.20: libnetfilter_cthelper.x86_64 0:1.0.0-11.el7
w2-k8s-1.20: libnetfilter_cttimeout.x86_64 0:1.0.0-7.el7
w2-k8s-1.20: libnetfilter_queue.x86_64 0:1.0.2-2.el7_2
w2-k8s-1.20: socat.x86_64 0:1.7.3.2-2.el7
w2-k8s-1.20: Complete!
w2-k8s-1.20: Created symlink from /etc/systemd/system/multi-user.target.wants/docker.service to /usr/lib/systemd/system/docker.service.
w2-k8s-1.20: Created symlink from /etc/systemd/system/multi-user.target.wants/kubelet.service to /usr/lib/systemd/system/kubelet.service.
==> w2-k8s-1.20: Running provisioner: shell...
w2-k8s-1.20: Running: /tmp/vagrant-shell20210329-63160-1o6s6yc.sh
w2-k8s-1.20: [preflight] Running pre-flight checks
w2-k8s-1.20: [WARNING IsDockerSystemdCheck]: detected "cgroupfs" as the Docker cgroup driver. The recommended driver is "systemd". Please follow the guide at https://kubernetes.io/docs/setup/cri/
w2-k8s-1.20: [preflight] Reading configuration from the cluster...
w2-k8s-1.20: [preflight] FYI: You can look at this config file with 'kubectl -n kube-system get cm kubeadm-config -o yaml'
w2-k8s-1.20: [kubelet-start] Writing kubelet configuration to file "/var/lib/kubelet/config.yaml"
w2-k8s-1.20: [kubelet-start] Writing kubelet environment file with flags to file "/var/lib/kubelet/kubeadm-flags.env"
w2-k8s-1.20: [kubelet-start] Starting the kubelet
w2-k8s-1.20: [kubelet-start] Waiting for the kubelet to perform the TLS Bootstrap...
w2-k8s-1.20:
w2-k8s-1.20: This node has joined the cluster:
w2-k8s-1.20: * Certificate signing request was sent to apiserver and a response was received.
w2-k8s-1.20: * The Kubelet was informed of the new secure connection details.
w2-k8s-1.20:
w2-k8s-1.20: Run 'kubectl get nodes' on the control-plane to see this node join the cluster.
==> w3-k8s-1.20: Importing base box 'sysnet4admin/CentOS-k8s'...
==> w3-k8s-1.20: Matching MAC address for NAT networking...
==> w3-k8s-1.20: Checking if box 'sysnet4admin/CentOS-k8s' version '0.7.4' is up to date...
==> w3-k8s-1.20: Setting the name of the VM: w3-k8s-1.20(github_SysNet4Admin)
==> w3-k8s-1.20: Clearing any previously set network interfaces...
==> w3-k8s-1.20: Preparing network interfaces based on configuration...
w3-k8s-1.20: Adapter 1: nat
w3-k8s-1.20: Adapter 2: hostonly
==> w3-k8s-1.20: Forwarding ports...
w3-k8s-1.20: 22 (guest) => 60103 (host) (adapter 1)
==> w3-k8s-1.20: Running 'pre-boot' VM customizations...
==> w3-k8s-1.20: Booting VM...
==> w3-k8s-1.20: Waiting for machine to boot. This may take a few minutes...
w3-k8s-1.20: SSH address: 127.0.0.1:60103
w3-k8s-1.20: SSH username: vagrant
w3-k8s-1.20: SSH auth method: private key
w3-k8s-1.20:
w3-k8s-1.20: Vagrant insecure key detected. Vagrant will automatically replace
w3-k8s-1.20: this with a newly generated keypair for better security.
w3-k8s-1.20:
w3-k8s-1.20: Inserting generated public key within guest...
w3-k8s-1.20: Removing insecure key from the guest if it's present...
w3-k8s-1.20: Key inserted! Disconnecting and reconnecting using new SSH key...
==> w3-k8s-1.20: Machine booted and ready!
==> w3-k8s-1.20: Checking for guest additions in VM...
w3-k8s-1.20: The guest additions on this VM do not match the installed version of
w3-k8s-1.20: VirtualBox! In most cases this is fine, but in rare cases it can
w3-k8s-1.20: prevent things such as shared folders from working properly. If you see
w3-k8s-1.20: shared folder errors, please make sure the guest additions within the
w3-k8s-1.20: virtual machine match the version of VirtualBox you have installed on
w3-k8s-1.20: your host and reload your VM.
w3-k8s-1.20:
w3-k8s-1.20: Guest Additions Version: 5.2.12
w3-k8s-1.20: VirtualBox Version: 6.1
==> w3-k8s-1.20: Setting hostname...
==> w3-k8s-1.20: Configuring and enabling network interfaces...
==> w3-k8s-1.20: Running provisioner: shell...
w3-k8s-1.20: Running: /tmp/vagrant-shell20210329-63160-pbv8xk.sh
w3-k8s-1.20: Loaded plugins: fastestmirror
w3-k8s-1.20: Determining fastest mirrors
w3-k8s-1.20: * base: mirror.kakao.com
w3-k8s-1.20: * extras: mirror.kakao.com
w3-k8s-1.20: * updates: mirror.kakao.com
w3-k8s-1.20: Package yum-utils-1.1.31-54.el7_8.noarch already installed and latest version
w3-k8s-1.20: Nothing to do
w3-k8s-1.20: Loaded plugins: fastestmirror
w3-k8s-1.20: adding repo from: https://download.docker.com/linux/centos/docker-ce.repo
w3-k8s-1.20: grabbing file https://download.docker.com/linux/centos/docker-ce.repo to /etc/yum.repos.d/docker-ce.repo
w3-k8s-1.20: repo saved to /etc/yum.repos.d/docker-ce.repo
==> w3-k8s-1.20: Running provisioner: shell...
w3-k8s-1.20: Running: /tmp/vagrant-shell20210329-63160-ef3on3.sh
w3-k8s-1.20: Loaded plugins: fastestmirror
w3-k8s-1.20: Loading mirror speeds from cached hostfile
w3-k8s-1.20: * base: mirror.kakao.com
w3-k8s-1.20: * extras: mirror.kakao.com
w3-k8s-1.20: * updates: mirror.kakao.com
w3-k8s-1.20: Resolving Dependencies
w3-k8s-1.20: --> Running transaction check
w3-k8s-1.20: ---> Package epel-release.noarch 0:7-11 will be installed
w3-k8s-1.20: --> Finished Dependency Resolution
w3-k8s-1.20:
w3-k8s-1.20: Dependencies Resolved
w3-k8s-1.20:
w3-k8s-1.20: ================================================================================
w3-k8s-1.20: Package Arch Version Repository Size
w3-k8s-1.20: ================================================================================
w3-k8s-1.20: Installing:
w3-k8s-1.20: epel-release noarch 7-11 extras 15 k
w3-k8s-1.20:
w3-k8s-1.20: Transaction Summary
w3-k8s-1.20: ================================================================================
w3-k8s-1.20: Install 1 Package
w3-k8s-1.20: Total download size: 15 k
w3-k8s-1.20: Installed size: 24 k
w3-k8s-1.20: Downloading packages:
w3-k8s-1.20: Running transaction check
w3-k8s-1.20: Running transaction test
w3-k8s-1.20: Transaction test succeeded
w3-k8s-1.20: Running transaction
w3-k8s-1.20: Installing : epel-release-7-11.noarch 1/1
w3-k8s-1.20:
w3-k8s-1.20: Verifying : epel-release-7-11.noarch 1/1
w3-k8s-1.20:
w3-k8s-1.20:
w3-k8s-1.20: Installed:
w3-k8s-1.20: epel-release.noarch 0:7-11
w3-k8s-1.20: Complete!
w3-k8s-1.20: Loaded plugins: fastestmirror
w3-k8s-1.20: Loading mirror speeds from cached hostfile
w3-k8s-1.20: * base: mirror.kakao.com
w3-k8s-1.20: * epel: ftp.iij.ad.jp
w3-k8s-1.20: * extras: mirror.kakao.com
w3-k8s-1.20: * updates: mirror.kakao.com
w3-k8s-1.20: http://fedora.cs.nctu.edu.tw/epel/7/x86_64/repodata/83a1589d01f3ca787903c382275594b95d14667e306e9460118036094e21f041-primary.sqlite.bz2: [Errno 14] HTTP Error 404 - Not Found
w3-k8s-1.20: Trying other mirror.
w3-k8s-1.20: To address this issue please refer to the below wiki article
w3-k8s-1.20:
w3-k8s-1.20: https://wiki.centos.org/yum-errors
w3-k8s-1.20:
w3-k8s-1.20: If above article doesn't help to resolve this issue please use https://bugs.centos.org/.
w3-k8s-1.20: Resolving Dependencies
w3-k8s-1.20: --> Running transaction check
w3-k8s-1.20: ---> Package vim-enhanced.x86_64 2:7.4.629-8.el7_9 will be installed
w3-k8s-1.20: --> Processing Dependency: vim-common = 2:7.4.629-8.el7_9 for package: 2:vim-enhanced-7.4.629-8.el7_9.x86_64
w3-k8s-1.20: --> Processing Dependency: perl(:MODULE_COMPAT_5.16.3) for package: 2:vim-enhanced-7.4.629-8.el7_9.x86_64
w3-k8s-1.20: --> Processing Dependency: libperl.so()(64bit) for package: 2:vim-enhanced-7.4.629-8.el7_9.x86_64
w3-k8s-1.20: --> Processing Dependency: libgpm.so.2()(64bit) for package: 2:vim-enhanced-7.4.629-8.el7_9.x86_64
w3-k8s-1.20: --> Running transaction check
w3-k8s-1.20: ---> Package gpm-libs.x86_64 0:1.20.7-6.el7 will be installed
w3-k8s-1.20: ---> Package perl.x86_64 4:5.16.3-299.el7_9 will be installed
w3-k8s-1.20: --> Processing Dependency: perl(Socket) >= 1.3 for package: 4:perl-5.16.3-299.el7_9.x86_64
w3-k8s-1.20: --> Processing Dependency: perl(Scalar::Util) >= 1.10 for package: 4:perl-5.16.3-299.el7_9.x86_64
w3-k8s-1.20: --> Processing Dependency: perl-macros for package: 4:perl-5.16.3-299.el7_9.x86_64
w3-k8s-1.20: --> Processing Dependency: perl(threads::shared) for package: 4:perl-5.16.3-299.el7_9.x86_64
w3-k8s-1.20: --> Processing Dependency: perl(threads) for package: 4:perl-5.16.3-299.el7_9.x86_64
w3-k8s-1.20: --> Processing Dependency: perl(constant) for package: 4:perl-5.16.3-299.el7_9.x86_64
w3-k8s-1.20: --> Processing Dependency: perl(Time::Local) for package: 4:perl-5.16.3-299.el7_9.x86_64
w3-k8s-1.20: --> Processing Dependency: perl(Time::HiRes) for package: 4:perl-5.16.3-299.el7_9.x86_64
w3-k8s-1.20: --> Processing Dependency: perl(Storable) for package: 4:perl-5.16.3-299.el7_9.x86_64
w3-k8s-1.20: --> Processing Dependency: perl(Socket) for package: 4:perl-5.16.3-299.el7_9.x86_64
w3-k8s-1.20: --> Processing Dependency: perl(Scalar::Util) for package: 4:perl-5.16.3-299.el7_9.x86_64
w3-k8s-1.20: --> Processing Dependency: perl(Pod::Simple::XHTML) for package: 4:perl-5.16.3-299.el7_9.x86_64
w3-k8s-1.20: --> Processing Dependency: perl(Pod::Simple::Search) for package: 4:perl-5.16.3-299.el7_9.x86_64
w3-k8s-1.20: --> Processing Dependency: perl(Getopt::Long) for package: 4:perl-5.16.3-299.el7_9.x86_64
w3-k8s-1.20: --> Processing Dependency: perl(Filter::Util::Call) for package: 4:perl-5.16.3-299.el7_9.x86_64
w3-k8s-1.20: --> Processing Dependency: perl(File::Temp) for package: 4:perl-5.16.3-299.el7_9.x86_64
w3-k8s-1.20: --> Processing Dependency: perl(File::Spec::Unix) for package: 4:perl-5.16.3-299.el7_9.x86_64
w3-k8s-1.20: --> Processing Dependency: perl(File::Spec::Functions) for package: 4:perl-5.16.3-299.el7_9.x86_64
w3-k8s-1.20: --> Processing Dependency: perl(File::Spec) for package: 4:perl-5.16.3-299.el7_9.x86_64
w3-k8s-1.20: --> Processing Dependency: perl(File::Path) for package: 4:perl-5.16.3-299.el7_9.x86_64
w3-k8s-1.20: --> Processing Dependency: perl(Exporter) for package: 4:perl-5.16.3-299.el7_9.x86_64
w3-k8s-1.20: --> Processing Dependency: perl(Cwd) for package: 4:perl-5.16.3-299.el7_9.x86_64
w3-k8s-1.20: --> Processing Dependency: perl(Carp) for package: 4:perl-5.16.3-299.el7_9.x86_64
w3-k8s-1.20: ---> Package perl-libs.x86_64 4:5.16.3-299.el7_9 will be installed
w3-k8s-1.20: ---> Package vim-common.x86_64 2:7.4.629-8.el7_9 will be installed
w3-k8s-1.20: --> Processing Dependency: vim-filesystem for package: 2:vim-common-7.4.629-8.el7_9.x86_64
w3-k8s-1.20: --> Running transaction check
w3-k8s-1.20: ---> Package perl-Carp.noarch 0:1.26-244.el7 will be installed
w3-k8s-1.20: ---> Package perl-Exporter.noarch 0:5.68-3.el7 will be installed
w3-k8s-1.20: ---> Package perl-File-Path.noarch 0:2.09-2.el7 will be installed
w3-k8s-1.20: ---> Package perl-File-Temp.noarch 0:0.23.01-3.el7 will be installed
w3-k8s-1.20: ---> Package perl-Filter.x86_64 0:1.49-3.el7 will be installed
w3-k8s-1.20: ---> Package perl-Getopt-Long.noarch 0:2.40-3.el7 will be installed
w3-k8s-1.20: --> Processing Dependency: perl(Pod::Usage) >= 1.14 for package: perl-Getopt-Long-2.40-3.el7.noarch
w3-k8s-1.20: --> Processing Dependency: perl(Text::ParseWords) for package: perl-Getopt-Long-2.40-3.el7.noarch
w3-k8s-1.20: ---> Package perl-PathTools.x86_64 0:3.40-5.el7 will be installed
w3-k8s-1.20: ---> Package perl-Pod-Simple.noarch 1:3.28-4.el7 will be installed
w3-k8s-1.20: --> Processing Dependency: perl(Pod::Escapes) >= 1.04 for package: 1:perl-Pod-Simple-3.28-4.el7.noarch
w3-k8s-1.20: --> Processing Dependency: perl(Encode) for package: 1:perl-Pod-Simple-3.28-4.el7.noarch
w3-k8s-1.20: ---> Package perl-Scalar-List-Utils.x86_64 0:1.27-248.el7 will be installed
w3-k8s-1.20: ---> Package perl-Socket.x86_64 0:2.010-5.el7 will be installed
w3-k8s-1.20: ---> Package perl-Storable.x86_64 0:2.45-3.el7 will be installed
w3-k8s-1.20: ---> Package perl-Time-HiRes.x86_64 4:1.9725-3.el7 will be installed
w3-k8s-1.20: ---> Package perl-Time-Local.noarch 0:1.2300-2.el7 will be installed
w3-k8s-1.20: ---> Package perl-constant.noarch 0:1.27-2.el7 will be installed
w3-k8s-1.20: ---> Package perl-macros.x86_64 4:5.16.3-299.el7_9 will be installed
w3-k8s-1.20: ---> Package perl-threads.x86_64 0:1.87-4.el7 will be installed
w3-k8s-1.20: ---> Package perl-threads-shared.x86_64 0:1.43-6.el7 will be installed
w3-k8s-1.20: ---> Package vim-filesystem.x86_64 2:7.4.629-8.el7_9 will be installed
w3-k8s-1.20: --> Running transaction check
w3-k8s-1.20: ---> Package perl-Encode.x86_64 0:2.51-7.el7 will be installed
w3-k8s-1.20: ---> Package perl-Pod-Escapes.noarch 1:1.04-299.el7_9 will be installed
w3-k8s-1.20: ---> Package perl-Pod-Usage.noarch 0:1.63-3.el7 will be installed
w3-k8s-1.20: --> Processing Dependency: perl(Pod::Text) >= 3.15 for package: perl-Pod-Usage-1.63-3.el7.noarch
w3-k8s-1.20: --> Processing Dependency: perl-Pod-Perldoc for package: perl-Pod-Usage-1.63-3.el7.noarch
w3-k8s-1.20: ---> Package perl-Text-ParseWords.noarch 0:3.29-4.el7 will be installed
w3-k8s-1.20: --> Running transaction check
w3-k8s-1.20: ---> Package perl-Pod-Perldoc.noarch 0:3.20-4.el7 will be installed
w3-k8s-1.20: --> Processing Dependency: perl(parent) for package: perl-Pod-Perldoc-3.20-4.el7.noarch
w3-k8s-1.20: --> Processing Dependency: perl(HTTP::Tiny) for package: perl-Pod-Perldoc-3.20-4.el7.noarch
w3-k8s-1.20: ---> Package perl-podlators.noarch 0:2.5.1-3.el7 will be installed
w3-k8s-1.20: --> Running transaction check
w3-k8s-1.20: ---> Package perl-HTTP-Tiny.noarch 0:0.033-3.el7 will be installed
w3-k8s-1.20: ---> Package perl-parent.noarch 1:0.225-244.el7 will be installed
w3-k8s-1.20: --> Finished Dependency Resolution
w3-k8s-1.20:
w3-k8s-1.20: Dependencies Resolved
w3-k8s-1.20:
w3-k8s-1.20: ================================================================================
w3-k8s-1.20: Package Arch Version Repository Size
w3-k8s-1.20: ================================================================================
w3-k8s-1.20: Installing:
w3-k8s-1.20: vim-enhanced x86_64 2:7.4.629-8.el7_9 updates 1.1 M
w3-k8s-1.20: Installing for dependencies:
w3-k8s-1.20: gpm-libs x86_64 1.20.7-6.el7 base 32 k
w3-k8s-1.20: perl x86_64 4:5.16.3-299.el7_9 updates 8.0 M
w3-k8s-1.20: perl-Carp noarch 1.26-244.el7 base 19 k
w3-k8s-1.20: perl-Encode x86_64 2.51-7.el7 base 1.5 M
w3-k8s-1.20: perl-Exporter noarch 5.68-3.el7 base 28 k
w3-k8s-1.20: perl-File-Path noarch 2.09-2.el7 base 26 k
w3-k8s-1.20: perl-File-Temp noarch 0.23.01-3.el7 base 56 k
w3-k8s-1.20: perl-Filter x86_64 1.49-3.el7 base 76 k
w3-k8s-1.20: perl-Getopt-Long noarch 2.40-3.el7 base 56 k
w3-k8s-1.20: perl-HTTP-Tiny noarch 0.033-3.el7 base 38 k
w3-k8s-1.20: perl-PathTools x86_64 3.40-5.el7 base 82 k
w3-k8s-1.20: perl-Pod-Escapes noarch 1:1.04-299.el7_9 updates 52 k
w3-k8s-1.20: perl-Pod-Perldoc noarch 3.20-4.el7 base 87 k
w3-k8s-1.20: perl-Pod-Simple noarch 1:3.28-4.el7 base 216 k
w3-k8s-1.20: perl-Pod-Usage noarch 1.63-3.el7 base 27 k
w3-k8s-1.20: perl-Scalar-List-Utils x86_64 1.27-248.el7 base 36 k
w3-k8s-1.20: perl-Socket x86_64 2.010-5.el7 base 49 k
w3-k8s-1.20: perl-Storable x86_64 2.45-3.el7 base 77 k
w3-k8s-1.20: perl-Text-ParseWords noarch 3.29-4.el7 base 14 k
w3-k8s-1.20: perl-Time-HiRes x86_64 4:1.9725-3.el7 base 45 k
w3-k8s-1.20: perl-Time-Local noarch 1.2300-2.el7 base 24 k
w3-k8s-1.20: perl-constant noarch 1.27-2.el7 base 19 k
w3-k8s-1.20: perl-libs x86_64 4:5.16.3-299.el7_9 updates 690 k
w3-k8s-1.20: perl-macros x86_64 4:5.16.3-299.el7_9 updates 44 k
w3-k8s-1.20: perl-parent noarch 1:0.225-244.el7 base 12 k
w3-k8s-1.20: perl-podlators noarch 2.5.1-3.el7 base 112 k
w3-k8s-1.20: perl-threads x86_64 1.87-4.el7 base 49 k
w3-k8s-1.20: perl-threads-shared x86_64 1.43-6.el7 base 39 k
w3-k8s-1.20: vim-common x86_64 2:7.4.629-8.el7_9 updates 5.9 M
w3-k8s-1.20: vim-filesystem x86_64 2:7.4.629-8.el7_9 updates 11 k
w3-k8s-1.20:
w3-k8s-1.20: Transaction Summary
w3-k8s-1.20: ================================================================================
w3-k8s-1.20: Install 1 Package (+30 Dependent packages)
w3-k8s-1.20: Total download size: 18 M
w3-k8s-1.20: Installed size: 60 M
w3-k8s-1.20: Downloading packages:
w3-k8s-1.20: --------------------------------------------------------------------------------
w3-k8s-1.20: Total 2.7 MB/s | 18 MB 00:06
w3-k8s-1.20: Running transaction check
w3-k8s-1.20: Running transaction test
w3-k8s-1.20: Transaction test succeeded
w3-k8s-1.20: Running transaction
w3-k8s-1.20: Installing : 1:perl-parent-0.225-244.el7.noarch 1/31
w3-k8s-1.20:
w3-k8s-1.20: Installing : perl-HTTP-Tiny-0.033-3.el7.noarch 2/31
w3-k8s-1.20:
w3-k8s-1.20: Installing : perl-podlators-2.5.1-3.el7.noarch 3/31
w3-k8s-1.20:
w3-k8s-1.20: Installing : perl-Pod-Perldoc-3.20-4.el7.noarch 4/31
w3-k8s-1.20:
w3-k8s-1.20: Installing : 1:perl-Pod-Escapes-1.04-299.el7_9.noarch 5/31
w3-k8s-1.20:
w3-k8s-1.20: Installing : perl-Encode-2.51-7.el7.x86_64 6/31
w3-k8s-1.20:
w3-k8s-1.20: Installing : perl-Text-ParseWords-3.29-4.el7.noarch 7/31
w3-k8s-1.20:
w3-k8s-1.20: Installing : perl-Pod-Usage-1.63-3.el7.noarch 8/31
w3-k8s-1.20:
w3-k8s-1.20: Installing : 4:perl-macros-5.16.3-299.el7_9.x86_64 9/31
w3-k8s-1.20:
w3-k8s-1.20: Installing : perl-Storable-2.45-3.el7.x86_64 10/31
w3-k8s-1.20:
w3-k8s-1.20: Installing : perl-Exporter-5.68-3.el7.noarch 11/31
w3-k8s-1.20:
w3-k8s-1.20: Installing : perl-constant-1.27-2.el7.noarch 12/31
w3-k8s-1.20:
w3-k8s-1.20: Installing : perl-Socket-2.010-5.el7.x86_64 13/31
w3-k8s-1.20:
w3-k8s-1.20: Installing : perl-Time-Local-1.2300-2.el7.noarch 14/31
w3-k8s-1.20:
w3-k8s-1.20: Installing : perl-Carp-1.26-244.el7.noarch 15/31
w3-k8s-1.20:
w3-k8s-1.20: Installing : perl-PathTools-3.40-5.el7.x86_64 16/31
w3-k8s-1.20:
w3-k8s-1.20: Installing : perl-Scalar-List-Utils-1.27-248.el7.x86_64 17/31
w3-k8s-1.20:
w3-k8s-1.20: Installing : 1:perl-Pod-Simple-3.28-4.el7.noarch 18/31
w3-k8s-1.20:
w3-k8s-1.20: Installing : perl-File-Temp-0.23.01-3.el7.noarch 19/31
w3-k8s-1.20:
w3-k8s-1.20: Installing : perl-File-Path-2.09-2.el7.noarch 20/31
w3-k8s-1.20:
w3-k8s-1.20: Installing : perl-threads-shared-1.43-6.el7.x86_64 21/31
w3-k8s-1.20:
w3-k8s-1.20: Installing : perl-threads-1.87-4.el7.x86_64 22/31
w3-k8s-1.20:
w3-k8s-1.20: Installing : 4:perl-Time-HiRes-1.9725-3.el7.x86_64 23/31
w3-k8s-1.20:
w3-k8s-1.20: Installing : perl-Filter-1.49-3.el7.x86_64 24/31
w3-k8s-1.20:
w3-k8s-1.20: Installing : 4:perl-libs-5.16.3-299.el7_9.x86_64 25/31
w3-k8s-1.20:
w3-k8s-1.20: Installing : perl-Getopt-Long-2.40-3.el7.noarch 26/31
w3-k8s-1.20:
w3-k8s-1.20: Installing : 4:perl-5.16.3-299.el7_9.x86_64 27/31
w3-k8s-1.20:
w3-k8s-1.20: Installing : gpm-libs-1.20.7-6.el7.x86_64 28/31
w3-k8s-1.20:
w3-k8s-1.20: Installing : 2:vim-filesystem-7.4.629-8.el7_9.x86_64 29/31
w3-k8s-1.20:
w3-k8s-1.20: Installing : 2:vim-common-7.4.629-8.el7_9.x86_64 30/31
w3-k8s-1.20:
w3-k8s-1.20: Installing : 2:vim-enhanced-7.4.629-8.el7_9.x86_64 31/31
w3-k8s-1.20:
w3-k8s-1.20: Verifying : perl-HTTP-Tiny-0.033-3.el7.noarch 1/31
w3-k8s-1.20:
w3-k8s-1.20: Verifying : perl-threads-shared-1.43-6.el7.x86_64 2/31
w3-k8s-1.20:
w3-k8s-1.20: Verifying : perl-Storable-2.45-3.el7.x86_64 3/31
w3-k8s-1.20:
w3-k8s-1.20: Verifying : perl-Exporter-5.68-3.el7.noarch 4/31
w3-k8s-1.20:
w3-k8s-1.20: Verifying : perl-constant-1.27-2.el7.noarch 5/31
w3-k8s-1.20:
w3-k8s-1.20: Verifying : perl-PathTools-3.40-5.el7.x86_64 6/31
w3-k8s-1.20:
w3-k8s-1.20: Verifying : 4:perl-macros-5.16.3-299.el7_9.x86_64 7/31
w3-k8s-1.20:
w3-k8s-1.20: Verifying : 2:vim-enhanced-7.4.629-8.el7_9.x86_64 8/31
w3-k8s-1.20:
w3-k8s-1.20: Verifying : 1:perl-parent-0.225-244.el7.noarch 9/31
w3-k8s-1.20:
w3-k8s-1.20: Verifying : perl-Socket-2.010-5.el7.x86_64 10/31
w3-k8s-1.20:
w3-k8s-1.20: Verifying : 2:vim-filesystem-7.4.629-8.el7_9.x86_64 11/31
w3-k8s-1.20:
w3-k8s-1.20: Verifying : perl-File-Temp-0.23.01-3.el7.noarch 12/31
w3-k8s-1.20:
w3-k8s-1.20: Verifying : 1:perl-Pod-Simple-3.28-4.el7.noarch 13/31
w3-k8s-1.20:
w3-k8s-1.20: Verifying : perl-Time-Local-1.2300-2.el7.noarch 14/31
w3-k8s-1.20:
w3-k8s-1.20: Verifying : 1:perl-Pod-Escapes-1.04-299.el7_9.noarch 15/31
w3-k8s-1.20:
w3-k8s-1.20: Verifying : perl-Carp-1.26-244.el7.noarch 16/31
w3-k8s-1.20:
w3-k8s-1.20: Verifying : 2:vim-common-7.4.629-8.el7_9.x86_64 17/31
w3-k8s-1.20:
w3-k8s-1.20: Verifying : perl-Scalar-List-Utils-1.27-248.el7.x86_64 18/31
w3-k8s-1.20:
w3-k8s-1.20: Verifying : perl-Pod-Usage-1.63-3.el7.noarch 19/31
w3-k8s-1.20:
w3-k8s-1.20: Verifying : perl-Encode-2.51-7.el7.x86_64 20/31
w3-k8s-1.20:
w3-k8s-1.20: Verifying : perl-Pod-Perldoc-3.20-4.el7.noarch 21/31
w3-k8s-1.20:
w3-k8s-1.20: Verifying : perl-podlators-2.5.1-3.el7.noarch 22/31
w3-k8s-1.20:
w3-k8s-1.20: Verifying : 4:perl-5.16.3-299.el7_9.x86_64 23/31
w3-k8s-1.20:
w3-k8s-1.20: Verifying : perl-File-Path-2.09-2.el7.noarch 24/31
w3-k8s-1.20:
w3-k8s-1.20: Verifying : perl-threads-1.87-4.el7.x86_64 25/31
w3-k8s-1.20:
w3-k8s-1.20: Verifying : 4:perl-Time-HiRes-1.9725-3.el7.x86_64 26/31
w3-k8s-1.20:
w3-k8s-1.20: Verifying : gpm-libs-1.20.7-6.el7.x86_64 27/31
w3-k8s-1.20:
w3-k8s-1.20: Verifying : perl-Filter-1.49-3.el7.x86_64 28/31
w3-k8s-1.20:
w3-k8s-1.20: Verifying : perl-Getopt-Long-2.40-3.el7.noarch 29/31
w3-k8s-1.20:
w3-k8s-1.20: Verifying : perl-Text-ParseWords-3.29-4.el7.noarch 30/31
w3-k8s-1.20:
w3-k8s-1.20: Verifying : 4:perl-libs-5.16.3-299.el7_9.x86_64 31/31
w3-k8s-1.20:
w3-k8s-1.20:
w3-k8s-1.20: Installed:
w3-k8s-1.20: vim-enhanced.x86_64 2:7.4.629-8.el7_9
w3-k8s-1.20:
w3-k8s-1.20: Dependency Installed:
w3-k8s-1.20: gpm-libs.x86_64 0:1.20.7-6.el7
w3-k8s-1.20: perl.x86_64 4:5.16.3-299.el7_9
w3-k8s-1.20: perl-Carp.noarch 0:1.26-244.el7
w3-k8s-1.20: perl-Encode.x86_64 0:2.51-7.el7
w3-k8s-1.20: perl-Exporter.noarch 0:5.68-3.el7
w3-k8s-1.20: perl-File-Path.noarch 0:2.09-2.el7
w3-k8s-1.20: perl-File-Temp.noarch 0:0.23.01-3.el7
w3-k8s-1.20: perl-Filter.x86_64 0:1.49-3.el7
w3-k8s-1.20: perl-Getopt-Long.noarch 0:2.40-3.el7
w3-k8s-1.20: perl-HTTP-Tiny.noarch 0:0.033-3.el7
w3-k8s-1.20: perl-PathTools.x86_64 0:3.40-5.el7
w3-k8s-1.20: perl-Pod-Escapes.noarch 1:1.04-299.el7_9
w3-k8s-1.20: perl-Pod-Perldoc.noarch 0:3.20-4.el7
w3-k8s-1.20: perl-Pod-Simple.noarch 1:3.28-4.el7
w3-k8s-1.20: perl-Pod-Usage.noarch 0:1.63-3.el7
w3-k8s-1.20: perl-Scalar-List-Utils.x86_64 0:1.27-248.el7
w3-k8s-1.20: perl-Socket.x86_64 0:2.010-5.el7
w3-k8s-1.20: perl-Storable.x86_64 0:2.45-3.el7
w3-k8s-1.20: perl-Text-ParseWords.noarch 0:3.29-4.el7
w3-k8s-1.20: perl-Time-HiRes.x86_64 4:1.9725-3.el7
w3-k8s-1.20: perl-Time-Local.noarch 0:1.2300-2.el7
w3-k8s-1.20: perl-constant.noarch 0:1.27-2.el7
w3-k8s-1.20: perl-libs.x86_64 4:5.16.3-299.el7_9
w3-k8s-1.20: perl-macros.x86_64 4:5.16.3-299.el7_9
w3-k8s-1.20: perl-parent.noarch 1:0.225-244.el7
w3-k8s-1.20: perl-podlators.noarch 0:2.5.1-3.el7
w3-k8s-1.20: perl-threads.x86_64 0:1.87-4.el7
w3-k8s-1.20: perl-threads-shared.x86_64 0:1.43-6.el7
w3-k8s-1.20: vim-common.x86_64 2:7.4.629-8.el7_9
w3-k8s-1.20: vim-filesystem.x86_64 2:7.4.629-8.el7_9
w3-k8s-1.20: Complete!
w3-k8s-1.20: Loaded plugins: fastestmirror
w3-k8s-1.20: Loading mirror speeds from cached hostfile
w3-k8s-1.20: * base: mirror.kakao.com
w3-k8s-1.20: * epel: ftp.iij.ad.jp
w3-k8s-1.20: * extras: mirror.kakao.com
w3-k8s-1.20: * updates: mirror.kakao.com
w3-k8s-1.20: Resolving Dependencies
w3-k8s-1.20: --> Running transaction check
w3-k8s-1.20: ---> Package git.x86_64 0:1.8.3.1-23.el7_8 will be installed
w3-k8s-1.20: --> Processing Dependency: perl-Git = 1.8.3.1-23.el7_8 for package: git-1.8.3.1-23.el7_8.x86_64
w3-k8s-1.20: --> Processing Dependency: rsync for package: git-1.8.3.1-23.el7_8.x86_64
w3-k8s-1.20: --> Processing Dependency: perl(Term::ReadKey) for package: git-1.8.3.1-23.el7_8.x86_64
w3-k8s-1.20: --> Processing Dependency: perl(Git) for package: git-1.8.3.1-23.el7_8.x86_64
w3-k8s-1.20: --> Processing Dependency: perl(Error) for package: git-1.8.3.1-23.el7_8.x86_64
w3-k8s-1.20: --> Running transaction check
w3-k8s-1.20: ---> Package perl-Error.noarch 1:0.17020-2.el7 will be installed
w3-k8s-1.20: ---> Package perl-Git.noarch 0:1.8.3.1-23.el7_8 will be installed
w3-k8s-1.20: ---> Package perl-TermReadKey.x86_64 0:2.30-20.el7 will be installed
w3-k8s-1.20: ---> Package rsync.x86_64 0:3.1.2-10.el7 will be installed
w3-k8s-1.20: --> Finished Dependency Resolution
w3-k8s-1.20:
w3-k8s-1.20: Dependencies Resolved
w3-k8s-1.20:
w3-k8s-1.20: ================================================================================
w3-k8s-1.20: Package Arch Version Repository Size
w3-k8s-1.20: ================================================================================
w3-k8s-1.20: Installing:
w3-k8s-1.20: git x86_64 1.8.3.1-23.el7_8 base 4.4 M
w3-k8s-1.20: Installing for dependencies:
w3-k8s-1.20: perl-Error noarch 1:0.17020-2.el7 base 32 k
w3-k8s-1.20: perl-Git noarch 1.8.3.1-23.el7_8 base 56 k
w3-k8s-1.20: perl-TermReadKey x86_64 2.30-20.el7 base 31 k
w3-k8s-1.20: rsync x86_64 3.1.2-10.el7 base 404 k
w3-k8s-1.20:
w3-k8s-1.20: Transaction Summary
w3-k8s-1.20: ================================================================================
w3-k8s-1.20: Install 1 Package (+4 Dependent packages)
w3-k8s-1.20: Total download size: 4.9 M
w3-k8s-1.20: Installed size: 23 M
w3-k8s-1.20: Downloading packages:
w3-k8s-1.20: --------------------------------------------------------------------------------
w3-k8s-1.20: Total 6.8 MB/s | 4.9 MB 00:00
w3-k8s-1.20: Running transaction check
w3-k8s-1.20: Running transaction test
w3-k8s-1.20: Transaction test succeeded
w3-k8s-1.20: Running transaction
w3-k8s-1.20: Installing : 1:perl-Error-0.17020-2.el7.noarch 1/5
w3-k8s-1.20:
w3-k8s-1.20: Installing : rsync-3.1.2-10.el7.x86_64 2/5
w3-k8s-1.20:
w3-k8s-1.20: Installing : perl-TermReadKey-2.30-20.el7.x86_64 3/5
w3-k8s-1.20:
w3-k8s-1.20: Installing : perl-Git-1.8.3.1-23.el7_8.noarch 4/5
w3-k8s-1.20:
w3-k8s-1.20: Installing : git-1.8.3.1-23.el7_8.x86_64 5/5
w3-k8s-1.20:
w3-k8s-1.20: Verifying : git-1.8.3.1-23.el7_8.x86_64 1/5
w3-k8s-1.20:
w3-k8s-1.20: Verifying : 1:perl-Error-0.17020-2.el7.noarch 2/5
w3-k8s-1.20:
w3-k8s-1.20: Verifying : perl-TermReadKey-2.30-20.el7.x86_64 3/5
w3-k8s-1.20:
w3-k8s-1.20: Verifying : perl-Git-1.8.3.1-23.el7_8.noarch 4/5
w3-k8s-1.20:
w3-k8s-1.20: Verifying : rsync-3.1.2-10.el7.x86_64 5/5
w3-k8s-1.20:
w3-k8s-1.20:
w3-k8s-1.20: Installed:
w3-k8s-1.20: git.x86_64 0:1.8.3.1-23.el7_8
w3-k8s-1.20:
w3-k8s-1.20: Dependency Installed:
w3-k8s-1.20: perl-Error.noarch 1:0.17020-2.el7 perl-Git.noarch 0:1.8.3.1-23.el7_8
w3-k8s-1.20: perl-TermReadKey.x86_64 0:2.30-20.el7 rsync.x86_64 0:3.1.2-10.el7
w3-k8s-1.20: Complete!
w3-k8s-1.20: Loaded plugins: fastestmirror
w3-k8s-1.20: Loading mirror speeds from cached hostfile
w3-k8s-1.20: * base: mirror.kakao.com
w3-k8s-1.20: * epel: ftp.iij.ad.jp
w3-k8s-1.20: * extras: mirror.kakao.com
w3-k8s-1.20: * updates: mirror.kakao.com
w3-k8s-1.20: Resolving Dependencies
w3-k8s-1.20: --> Running transaction check
w3-k8s-1.20: ---> Package containerd.io.x86_64 0:1.3.9-3.1.el7 will be installed
w3-k8s-1.20: --> Processing Dependency: container-selinux >= 2:2.74 for package: containerd.io-1.3.9-3.1.el7.x86_64
w3-k8s-1.20: ---> Package docker-ce.x86_64 3:19.03.14-3.el7 will be installed
w3-k8s-1.20: --> Processing Dependency: libcgroup for package: 3:docker-ce-19.03.14-3.el7.x86_64
w3-k8s-1.20: ---> Package docker-ce-cli.x86_64 1:19.03.14-3.el7 will be installed
w3-k8s-1.20: --> Running transaction check
w3-k8s-1.20: ---> Package container-selinux.noarch 2:2.119.2-1.911c772.el7_8 will be installed
w3-k8s-1.20: --> Processing Dependency: policycoreutils-python for package: 2:container-selinux-2.119.2-1.911c772.el7_8.noarch
w3-k8s-1.20: ---> Package libcgroup.x86_64 0:0.41-21.el7 will be installed
w3-k8s-1.20: --> Running transaction check
w3-k8s-1.20: ---> Package policycoreutils-python.x86_64 0:2.5-34.el7 will be installed
w3-k8s-1.20: --> Processing Dependency: setools-libs >= 3.3.8-4 for package: policycoreutils-python-2.5-34.el7.x86_64
w3-k8s-1.20: --> Processing Dependency: libsemanage-python >= 2.5-14 for package: policycoreutils-python-2.5-34.el7.x86_64
w3-k8s-1.20: --> Processing Dependency: audit-libs-python >= 2.1.3-4 for package: policycoreutils-python-2.5-34.el7.x86_64
w3-k8s-1.20: --> Processing Dependency: python-IPy for package: policycoreutils-python-2.5-34.el7.x86_64
w3-k8s-1.20: --> Processing Dependency: libqpol.so.1(VERS_1.4)(64bit) for package: policycoreutils-python-2.5-34.el7.x86_64
w3-k8s-1.20: --> Processing Dependency: libqpol.so.1(VERS_1.2)(64bit) for package: policycoreutils-python-2.5-34.el7.x86_64
w3-k8s-1.20: --> Processing Dependency: libapol.so.4(VERS_4.0)(64bit) for package: policycoreutils-python-2.5-34.el7.x86_64
w3-k8s-1.20: --> Processing Dependency: checkpolicy for package: policycoreutils-python-2.5-34.el7.x86_64
w3-k8s-1.20: --> Processing Dependency: libqpol.so.1()(64bit) for package: policycoreutils-python-2.5-34.el7.x86_64
w3-k8s-1.20: --> Processing Dependency: libapol.so.4()(64bit) for package: policycoreutils-python-2.5-34.el7.x86_64
w3-k8s-1.20: --> Running transaction check
w3-k8s-1.20: ---> Package audit-libs-python.x86_64 0:2.8.5-4.el7 will be installed
w3-k8s-1.20: ---> Package checkpolicy.x86_64 0:2.5-8.el7 will be installed
w3-k8s-1.20: ---> Package libsemanage-python.x86_64 0:2.5-14.el7 will be installed
w3-k8s-1.20: ---> Package python-IPy.noarch 0:0.75-6.el7 will be installed
w3-k8s-1.20: ---> Package setools-libs.x86_64 0:3.3.8-4.el7 will be installed
w3-k8s-1.20: --> Finished Dependency Resolution
w3-k8s-1.20:
w3-k8s-1.20: Dependencies Resolved
w3-k8s-1.20:
w3-k8s-1.20: ================================================================================
w3-k8s-1.20: Package Arch Version Repository Size
w3-k8s-1.20: ================================================================================
w3-k8s-1.20: Installing:
w3-k8s-1.20: containerd.io x86_64 1.3.9-3.1.el7 docker-ce-stable 29 M
w3-k8s-1.20: docker-ce x86_64 3:19.03.14-3.el7 docker-ce-stable 24 M
w3-k8s-1.20: docker-ce-cli x86_64 1:19.03.14-3.el7 docker-ce-stable 38 M
w3-k8s-1.20: Installing for dependencies:
w3-k8s-1.20: audit-libs-python x86_64 2.8.5-4.el7 base 76 k
w3-k8s-1.20: checkpolicy x86_64 2.5-8.el7 base 295 k
w3-k8s-1.20: container-selinux noarch 2:2.119.2-1.911c772.el7_8 extras 40 k
w3-k8s-1.20: libcgroup x86_64 0.41-21.el7 base 66 k
w3-k8s-1.20: libsemanage-python x86_64 2.5-14.el7 base 113 k
w3-k8s-1.20: policycoreutils-python x86_64 2.5-34.el7 base 457 k
w3-k8s-1.20: python-IPy noarch 0.75-6.el7 base 32 k
w3-k8s-1.20: setools-libs x86_64 3.3.8-4.el7 base 620 k
w3-k8s-1.20:
w3-k8s-1.20: Transaction Summary
w3-k8s-1.20: ================================================================================
w3-k8s-1.20: Install 3 Packages (+8 Dependent packages)
w3-k8s-1.20: Total download size: 93 M
w3-k8s-1.20: Installed size: 393 M
w3-k8s-1.20: Downloading packages:
w3-k8s-1.20: warning:
w3-k8s-1.20: /var/cache/yum/x86_64/7/docker-ce-stable/packages/docker-ce-19.03.14-3.el7.x86_64.rpm: Header V4 RSA/SHA512 Signature, key ID 621e9f35: NOKEY
w3-k8s-1.20: Public key for docker-ce-19.03.14-3.el7.x86_64.rpm is not installed
w3-k8s-1.20: --------------------------------------------------------------------------------
w3-k8s-1.20: Total 9.4 MB/s | 93 MB 00:09
w3-k8s-1.20: Retrieving key from https://download.docker.com/linux/centos/gpg
w3-k8s-1.20: Importing GPG key 0x621E9F35:
w3-k8s-1.20: Userid : "Docker Release (CE rpm) <docker@docker.com>"
w3-k8s-1.20: Fingerprint: 060a 61c5 1b55 8a7f 742b 77aa c52f eb6b 621e 9f35
w3-k8s-1.20: From : https://download.docker.com/linux/centos/gpg
w3-k8s-1.20: Running transaction check
w3-k8s-1.20: Running transaction test
w3-k8s-1.20: Transaction test succeeded
w3-k8s-1.20: Running transaction
w3-k8s-1.20: Installing : libcgroup-0.41-21.el7.x86_64 1/11
w3-k8s-1.20:
w3-k8s-1.20: Installing : setools-libs-3.3.8-4.el7.x86_64 2/11
w3-k8s-1.20:
w3-k8s-1.20: Installing : 1:docker-ce-cli-19.03.14-3.el7.x86_64 3/11
w3-k8s-1.20:
w3-k8s-1.20: Installing : audit-libs-python-2.8.5-4.el7.x86_64 4/11
w3-k8s-1.20:
w3-k8s-1.20: Installing : python-IPy-0.75-6.el7.noarch 5/11
w3-k8s-1.20:
w3-k8s-1.20: Installing : libsemanage-python-2.5-14.el7.x86_64 6/11
w3-k8s-1.20:
w3-k8s-1.20: Installing : checkpolicy-2.5-8.el7.x86_64 7/11
w3-k8s-1.20:
w3-k8s-1.20: Installing : policycoreutils-python-2.5-34.el7.x86_64 8/11
w3-k8s-1.20:
w3-k8s-1.20: Installing : 2:container-selinux-2.119.2-1.911c772.el7_8.noarch 9/11
w3-k8s-1.20:
w3-k8s-1.20: Installing : containerd.io-1.3.9-3.1.el7.x86_64 10/11
w3-k8s-1.20:
w3-k8s-1.20: Installing : 3:docker-ce-19.03.14-3.el7.x86_64 11/11
w3-k8s-1.20:
w3-k8s-1.20: Verifying : checkpolicy-2.5-8.el7.x86_64 1/11
w3-k8s-1.20:
w3-k8s-1.20: Verifying : 3:docker-ce-19.03.14-3.el7.x86_64 2/11
w3-k8s-1.20:
w3-k8s-1.20: Verifying : containerd.io-1.3.9-3.1.el7.x86_64 3/11
w3-k8s-1.20:
w3-k8s-1.20: Verifying : libsemanage-python-2.5-14.el7.x86_64 4/11
w3-k8s-1.20:
w3-k8s-1.20: Verifying : 2:container-selinux-2.119.2-1.911c772.el7_8.noarch 5/11
w3-k8s-1.20:
w3-k8s-1.20: Verifying : python-IPy-0.75-6.el7.noarch 6/11
w3-k8s-1.20:
w3-k8s-1.20: Verifying : policycoreutils-python-2.5-34.el7.x86_64 7/11
w3-k8s-1.20:
w3-k8s-1.20: Verifying : audit-libs-python-2.8.5-4.el7.x86_64 8/11
w3-k8s-1.20:
w3-k8s-1.20: Verifying : 1:docker-ce-cli-19.03.14-3.el7.x86_64 9/11
w3-k8s-1.20:
w3-k8s-1.20: Verifying : setools-libs-3.3.8-4.el7.x86_64 10/11
w3-k8s-1.20:
w3-k8s-1.20: Verifying : libcgroup-0.41-21.el7.x86_64 11/11
w3-k8s-1.20:
w3-k8s-1.20:
w3-k8s-1.20: Installed:
w3-k8s-1.20: containerd.io.x86_64 0:1.3.9-3.1.el7 docker-ce.x86_64 3:19.03.14-3.el7
w3-k8s-1.20: docker-ce-cli.x86_64 1:19.03.14-3.el7
w3-k8s-1.20:
w3-k8s-1.20: Dependency Installed:
w3-k8s-1.20: audit-libs-python.x86_64 0:2.8.5-4.el7
w3-k8s-1.20: checkpolicy.x86_64 0:2.5-8.el7
w3-k8s-1.20: container-selinux.noarch 2:2.119.2-1.911c772.el7_8
w3-k8s-1.20: libcgroup.x86_64 0:0.41-21.el7
w3-k8s-1.20: libsemanage-python.x86_64 0:2.5-14.el7
w3-k8s-1.20: policycoreutils-python.x86_64 0:2.5-34.el7
w3-k8s-1.20: python-IPy.noarch 0:0.75-6.el7
w3-k8s-1.20: setools-libs.x86_64 0:3.3.8-4.el7
w3-k8s-1.20: Complete!
w3-k8s-1.20: Loaded plugins: fastestmirror
w3-k8s-1.20: Loading mirror speeds from cached hostfile
w3-k8s-1.20: * base: mirror.kakao.com
w3-k8s-1.20: * epel: ftp.iij.ad.jp
w3-k8s-1.20: * extras: mirror.kakao.com
w3-k8s-1.20: * updates: mirror.kakao.com
w3-k8s-1.20: Resolving Dependencies
w3-k8s-1.20: --> Running transaction check
w3-k8s-1.20: ---> Package kubeadm.x86_64 0:1.20.2-0 will be installed
w3-k8s-1.20: --> Processing Dependency: kubernetes-cni >= 0.8.6 for package: kubeadm-1.20.2-0.x86_64
w3-k8s-1.20: --> Processing Dependency: cri-tools >= 1.13.0 for package: kubeadm-1.20.2-0.x86_64
w3-k8s-1.20: ---> Package kubectl.x86_64 0:1.20.2-0 will be installed
w3-k8s-1.20: ---> Package kubelet.x86_64 0:1.20.2-0 will be installed
w3-k8s-1.20: --> Processing Dependency: socat for package: kubelet-1.20.2-0.x86_64
w3-k8s-1.20: --> Processing Dependency: conntrack for package: kubelet-1.20.2-0.x86_64
w3-k8s-1.20: --> Running transaction check
w3-k8s-1.20: ---> Package conntrack-tools.x86_64 0:1.4.4-7.el7 will be installed
w3-k8s-1.20: --> Processing Dependency: libnetfilter_cttimeout.so.1(LIBNETFILTER_CTTIMEOUT_1.1)(64bit) for package: conntrack-tools-1.4.4-7.el7.x86_64
w3-k8s-1.20: --> Processing Dependency: libnetfilter_cttimeout.so.1(LIBNETFILTER_CTTIMEOUT_1.0)(64bit) for package: conntrack-tools-1.4.4-7.el7.x86_64
w3-k8s-1.20: --> Processing Dependency: libnetfilter_cthelper.so.0(LIBNETFILTER_CTHELPER_1.0)(64bit) for package: conntrack-tools-1.4.4-7.el7.x86_64
w3-k8s-1.20: --> Processing Dependency: libnetfilter_queue.so.1()(64bit) for package: conntrack-tools-1.4.4-7.el7.x86_64
w3-k8s-1.20: --> Processing Dependency: libnetfilter_cttimeout.so.1()(64bit) for package: conntrack-tools-1.4.4-7.el7.x86_64
w3-k8s-1.20: --> Processing Dependency: libnetfilter_cthelper.so.0()(64bit) for package: conntrack-tools-1.4.4-7.el7.x86_64
w3-k8s-1.20: ---> Package cri-tools.x86_64 0:1.13.0-0 will be installed
w3-k8s-1.20: ---> Package kubernetes-cni.x86_64 0:0.8.7-0 will be installed
w3-k8s-1.20: ---> Package socat.x86_64 0:1.7.3.2-2.el7 will be installed
w3-k8s-1.20: --> Running transaction check
w3-k8s-1.20: ---> Package libnetfilter_cthelper.x86_64 0:1.0.0-11.el7 will be installed
w3-k8s-1.20: ---> Package libnetfilter_cttimeout.x86_64 0:1.0.0-7.el7 will be installed
w3-k8s-1.20: ---> Package libnetfilter_queue.x86_64 0:1.0.2-2.el7_2 will be installed
w3-k8s-1.20: --> Finished Dependency Resolution
w3-k8s-1.20:
w3-k8s-1.20: Dependencies Resolved
w3-k8s-1.20:
w3-k8s-1.20: ================================================================================
w3-k8s-1.20: Package Arch Version Repository Size
w3-k8s-1.20: ================================================================================
w3-k8s-1.20: Installing:
w3-k8s-1.20: kubeadm x86_64 1.20.2-0 kubernetes 8.3 M
w3-k8s-1.20: kubectl x86_64 1.20.2-0 kubernetes 8.5 M
w3-k8s-1.20: kubelet x86_64 1.20.2-0 kubernetes 20 M
w3-k8s-1.20: Installing for dependencies:
w3-k8s-1.20: conntrack-tools x86_64 1.4.4-7.el7 base 187 k
w3-k8s-1.20: cri-tools x86_64 1.13.0-0 kubernetes 5.1 M
w3-k8s-1.20: kubernetes-cni x86_64 0.8.7-0 kubernetes 19 M
w3-k8s-1.20: libnetfilter_cthelper x86_64 1.0.0-11.el7 base 18 k
w3-k8s-1.20: libnetfilter_cttimeout x86_64 1.0.0-7.el7 base 18 k
w3-k8s-1.20: libnetfilter_queue x86_64 1.0.2-2.el7_2 base 23 k
w3-k8s-1.20: socat x86_64 1.7.3.2-2.el7 base 290 k
w3-k8s-1.20:
w3-k8s-1.20: Transaction Summary
w3-k8s-1.20: ================================================================================
w3-k8s-1.20: Install 3 Packages (+7 Dependent packages)
w3-k8s-1.20: Total download size: 61 M
w3-k8s-1.20: Installed size: 262 M
w3-k8s-1.20: Downloading packages:
w3-k8s-1.20: warning:
w3-k8s-1.20: /var/cache/yum/x86_64/7/kubernetes/packages/14bfe6e75a9efc8eca3f638eb22c7e2ce759c67f95b43b16fae4ebabde1549f3-cri-tools-1.13.0-0.x86_64.rpm: Header V4 RSA/SHA512 Signature, key ID 3e1ba8d5: NOKEY
w3-k8s-1.20: Public key for 14bfe6e75a9efc8eca3f638eb22c7e2ce759c67f95b43b16fae4ebabde1549f3-cri-tools-1.13.0-0.x86_64.rpm is not installed
w3-k8s-1.20: --------------------------------------------------------------------------------
w3-k8s-1.20: Total 7.9 MB/s | 61 MB 00:07
w3-k8s-1.20: Retrieving key from https://packages.cloud.google.com/yum/doc/yum-key.gpg
w3-k8s-1.20: Importing GPG key 0xA7317B0F:
w3-k8s-1.20: Userid : "Google Cloud Packages Automatic Signing Key <gc-team@google.com>"
w3-k8s-1.20: Fingerprint: d0bc 747f d8ca f711 7500 d6fa 3746 c208 a731 7b0f
w3-k8s-1.20: From : https://packages.cloud.google.com/yum/doc/yum-key.gpg
w3-k8s-1.20: Importing GPG key 0xBA07F4FB:
w3-k8s-1.20: Userid : "Google Cloud Packages Automatic Signing Key <gc-team@google.com>"
w3-k8s-1.20: Fingerprint: 54a6 47f9 048d 5688 d7da 2abe 6a03 0b21 ba07 f4fb
w3-k8s-1.20: From : https://packages.cloud.google.com/yum/doc/yum-key.gpg
w3-k8s-1.20: Retrieving key from https://packages.cloud.google.com/yum/doc/rpm-package-key.gpg
w3-k8s-1.20: Importing GPG key 0x3E1BA8D5:
w3-k8s-1.20: Userid : "Google Cloud Packages RPM Signing Key <gc-team@google.com>"
w3-k8s-1.20: Fingerprint: 3749 e1ba 95a8 6ce0 5454 6ed2 f09c 394c 3e1b a8d5
w3-k8s-1.20: From : https://packages.cloud.google.com/yum/doc/rpm-package-key.gpg
w3-k8s-1.20: Running transaction check
w3-k8s-1.20: Running transaction test
w3-k8s-1.20: Transaction test succeeded
w3-k8s-1.20: Running transaction
w3-k8s-1.20: Installing : libnetfilter_cthelper-1.0.0-11.el7.x86_64 1/10
w3-k8s-1.20:
w3-k8s-1.20: Installing : socat-1.7.3.2-2.el7.x86_64 2/10
w3-k8s-1.20:
w3-k8s-1.20: Installing : libnetfilter_cttimeout-1.0.0-7.el7.x86_64 3/10
w3-k8s-1.20:
w3-k8s-1.20: Installing : kubectl-1.20.2-0.x86_64 4/10
w3-k8s-1.20:
w3-k8s-1.20: Installing : libnetfilter_queue-1.0.2-2.el7_2.x86_64 5/10
w3-k8s-1.20:
w3-k8s-1.20: Installing : conntrack-tools-1.4.4-7.el7.x86_64 6/10
w3-k8s-1.20:
w3-k8s-1.20: Installing : kubernetes-cni-0.8.7-0.x86_64 7/10
w3-k8s-1.20:
w3-k8s-1.20: Installing : kubelet-1.20.2-0.x86_64 8/10
w3-k8s-1.20:
w3-k8s-1.20: Installing : cri-tools-1.13.0-0.x86_64 9/10
w3-k8s-1.20:
w3-k8s-1.20: Installing : kubeadm-1.20.2-0.x86_64 10/10
w3-k8s-1.20:
w3-k8s-1.20: Verifying : conntrack-tools-1.4.4-7.el7.x86_64 1/10
w3-k8s-1.20:
w3-k8s-1.20: Verifying : kubernetes-cni-0.8.7-0.x86_64 2/10
w3-k8s-1.20:
w3-k8s-1.20: Verifying : kubelet-1.20.2-0.x86_64 3/10
w3-k8s-1.20:
w3-k8s-1.20: Verifying : kubeadm-1.20.2-0.x86_64 4/10
w3-k8s-1.20:
w3-k8s-1.20: Verifying : cri-tools-1.13.0-0.x86_64 5/10
w3-k8s-1.20:
w3-k8s-1.20: Verifying : libnetfilter_queue-1.0.2-2.el7_2.x86_64 6/10
w3-k8s-1.20:
w3-k8s-1.20: Verifying : kubectl-1.20.2-0.x86_64 7/10
w3-k8s-1.20:
w3-k8s-1.20: Verifying : libnetfilter_cttimeout-1.0.0-7.el7.x86_64 8/10
w3-k8s-1.20:
w3-k8s-1.20: Verifying : socat-1.7.3.2-2.el7.x86_64 9/10
w3-k8s-1.20:
w3-k8s-1.20: Verifying : libnetfilter_cthelper-1.0.0-11.el7.x86_64 10/10
w3-k8s-1.20:
w3-k8s-1.20:
w3-k8s-1.20: Installed:
w3-k8s-1.20: kubeadm.x86_64 0:1.20.2-0 kubectl.x86_64 0:1.20.2-0 kubelet.x86_64 0:1.20.2-0
w3-k8s-1.20:
w3-k8s-1.20: Dependency Installed:
w3-k8s-1.20: conntrack-tools.x86_64 0:1.4.4-7.el7
w3-k8s-1.20: cri-tools.x86_64 0:1.13.0-0
w3-k8s-1.20: kubernetes-cni.x86_64 0:0.8.7-0
w3-k8s-1.20: libnetfilter_cthelper.x86_64 0:1.0.0-11.el7
w3-k8s-1.20: libnetfilter_cttimeout.x86_64 0:1.0.0-7.el7
w3-k8s-1.20: libnetfilter_queue.x86_64 0:1.0.2-2.el7_2
w3-k8s-1.20: socat.x86_64 0:1.7.3.2-2.el7
w3-k8s-1.20: Complete!
w3-k8s-1.20: Created symlink from /etc/systemd/system/multi-user.target.wants/docker.service to /usr/lib/systemd/system/docker.service.
w3-k8s-1.20: Created symlink from /etc/systemd/system/multi-user.target.wants/kubelet.service to /usr/lib/systemd/system/kubelet.service.
==> w3-k8s-1.20: Running provisioner: shell...
w3-k8s-1.20: Running: /tmp/vagrant-shell20210329-63160-1b77b3m.sh
w3-k8s-1.20: [preflight] Running pre-flight checks
w3-k8s-1.20: [WARNING IsDockerSystemdCheck]: detected "cgroupfs" as the Docker cgroup driver. The recommended driver is "systemd". Please follow the guide at https://kubernetes.io/docs/setup/cri/
w3-k8s-1.20: [preflight] Reading configuration from the cluster...
w3-k8s-1.20: [preflight] FYI: You can look at this config file with 'kubectl -n kube-system get cm kubeadm-config -o yaml'
w3-k8s-1.20: [kubelet-start] Writing kubelet configuration to file "/var/lib/kubelet/config.yaml"
w3-k8s-1.20: [kubelet-start] Writing kubelet environment file with flags to file "/var/lib/kubelet/kubeadm-flags.env"
w3-k8s-1.20: [kubelet-start] Starting the kubelet
w3-k8s-1.20: [kubelet-start] Waiting for the kubelet to perform the TLS Bootstrap...
w3-k8s-1.20:
w3-k8s-1.20: This node has joined the cluster:
w3-k8s-1.20: * Certificate signing request was sent to apiserver and a response was received.
w3-k8s-1.20: * The Kubelet was informed of the new secure connection details.
w3-k8s-1.20:
w3-k8s-1.20: Run 'kubectl get nodes' on the control-plane to see this node join the cluster.
~/Infraspace/k8sStudy/_Lecture_k8s.starterkit/ch1/1.2/k8s-min-5GiB main !2 11m 48s 15:09:18
❯
4) 기타 유용한 정보:
0
조훈(Hoon Jo)
지식공유자2021.03.29
+ 아마 호스트에서 접근하는 네트워크에 경로가 좀 의심이 되는데, 이 상태면 다른 내려받아야 하는 것들 모두 문제가 발생할 수도 있을꺼 같아요 (특히 Calico?)
0
조훈(Hoon Jo)
지식공유자2021.03.29
안녕하세요
제가 지금 환경을 100% 이해를 하지 못하여서 애매하긴 한데...
마스터와 워커가 다른 곳에서 gpg를 받아오는건 다소 생소하고...
또한 한국이 아니라 tw쪽으로 하는 것도 특이하네요 혹시 vpn을 쓰시는걸까요?
w1-k8s라고 하셔서 m-k8s는 잘 진행되신줄 알았어요
그러면 정리하자면,
1) 'vagrant up'으로 gpg 이슈로 kubernetes repo가 제대로 생성되지 않음이 맞으실까요?
만약 1)이 맞다면...
현재 호스트 네트워크가 tw를 바라보는데 한국에 있는 망을 사용하지 않으시는걸까요?
질문 주신 이 부분의 앞뒤를 주시면 좀 더 정확하게 답변 드릴수 있긴 하지만...epel-release 설치가 난 것으로 보여지는데요.
http://fedora.cs.nctu.edu.tw/epel/7/x86_64/repodata/83a1589d01f3ca787903c382275594b95d14667e306e9460118036094e21f041-primary.sqlite.bz2
호스트 상에서 접근이 되지 않는 것을 게스트(VM/센트OS)에서 접근할 수는 없어서요...이 문제는 아닌거 같지만..현재의 단편적인 내용으로는 충분한 답을 하기 어려울 것 같습니다.
질문을 좀 정리해서 주실수 있을까요?
0) 현재 환경(시스템 및 네트워크 관련 정보 모두)
1) (반복적으로 발생하는) 문제:
2) 문제 재현 방법:
3) 관련 로그 모두:
4) 기타 유용한 정보:
조훈 드림.
0
백동주
질문자2021.03.29
네 동일한 부분에서 문제가 발생합니다.
repo_gpgpcheck=0 로 진행 중입니다.
일부 Warning이 나는 부분 보다 다음의 내용은 해결해야할 부분으로 보여 하나더 여쭙니다.
http://fedora.cs.nctu.edu.tw/epel/7/x86_64/repodata/83a1589d01f3ca787903c382275594b95d14667e306e9460118036094e21f041-primary.sqlite.bz2: [Errno 14] HTTP Error 404 - Not Found
모든 노드에서 상기 내용이 문제시 되어 보입니다.
0
조훈(Hoon Jo)
지식공유자2021.03.29
안녕하세요
아래의 로그를 보면 kubernetes rpm-package-key.gpg를 받아서 repo와 매핑하는 과정에서 문제가 생긴 것으로 보여집니다....
w1-k8s-1.20: Retrieving key from https://packages.cloud.google.com/yum/doc/yum-key.gpg
w1-k8s-1.20: Importing GPG key 0xA7317B0F:
w1-k8s-1.20: Userid : "Google Cloud Packages Automatic Signing Key <gc-team@google.com>"
w1-k8s-1.20: Fingerprint: d0bc 747f d8ca f711 7500 d6fa 3746 c208 a731 7b0f
w1-k8s-1.20: From : https://packages.cloud.google.com/yum/doc/yum-key.gpg
w1-k8s-1.20: Retrieving key from https://packages.cloud.google.com/yum/doc/rpm-package-key.gpg
w1-k8s-1.20: https://packages.cloud.google.com/yum/repos/kubernetes-el7-x86_64/repodata/repomd.xml: [Errno -1] repomd.xml signature could not be verified for kubernetes
w1-k8s-1.20: Trying other mirror.
윈도우와 맥에서만 주로하고 우분투 환경은 테스트 해본적이 없긴 한데요..
크게 다를꺼 같지는 않은데...계속 실행해도 동일한 곳에서 문제가 생기시나요?
일단 마스터 노드와 워커 노드 모두 동일한 repo를 바라보도록 설계 되어 있어서..워커 노드만 문제가 생기기는 어렵습니다.
문제가 생긴 w1-k8s를 지우고 다시 'vagrant up'을 여러 번 해보시기를 권장드리고, 그래도 안된다면 아래의 2가지 방법 중에 하나를 선택해야 할 것 같습니다.
1) 윈도우 또는 맥에서 실습
2) 아래의 부분을 변경하거나 다른 방법을 검색해서 해결.
[kubernetes]
name=Kubernetes
baseurl=https://packages.cloud.google.com/yum/repos/kubernetes-el7-x86_64
enabled=1
gpgcheck=1
repo_gpgcheck=1
gpgkey=https://packages.cloud.google.com/yum/doc/yum-key.gpg https://packages.cloud.google.com/yum/doc/rpm-package-key.gpghttps://github.com/kubernetes/kubernetes/issues/60134
조치를 취하고 상황을 업데이트 주시면 좋을 것 같습니다!!
조훈 드림.
답변 10